RE: [PATCH v6 2/2] tty: samsung_tty: 32-bit access for TX/RX hold registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07. 04. 20, 1:49, Jiri Slaby wrote:
> On 07. 04. 20, 1:08, Hyunki Koo wrote:
> > Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> >
> > This is required for some newer SoCs.
> >
> > Signed-off-by: Hyunki Koo <hyunki00.koo@xxxxxxxxxxx>
> ...
> > ---
> >  drivers/tty/serial/samsung_tty.c | 76
> > +++++++++++++++++++++++++++++++++-------
> >  1 file changed, 64 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/tty/serial/samsung_tty.c
> > b/drivers/tty/serial/samsung_tty.c
> > index 73f951d65b93..bdf1d4d12cb1 100644
> > --- a/drivers/tty/serial/samsung_tty.c
> > +++ b/drivers/tty/serial/samsung_tty.c
> > @@ -154,12 +154,47 @@ struct s3c24xx_uart_port {
> ...
> > -#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port,
> > reg))
> > +static void wr_reg(struct uart_port *port, u32 reg, u32 val) {
> > +	switch (port->iotype) {
> > +	case UPIO_MEM:
> > +		writeb_relaxed(val, portaddr(port, reg));
> > +		break;
> > +	case UPIO_MEM32:
> > +		writel_relaxed(val, portaddr(port, reg));
> > +		break;
> > +	}
> > +}
> > +
> >  #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port,
> > reg))
> >
> > +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
> 
> You need to explain, why you need this _barrier variant now. This change
> should be done in a separate patch too.
> 
> > +{
> > +	switch (port->iotype) {
> > +	case UPIO_MEM:
> > +		writeb(val, portaddr(port, reg));
> > +		break;
> > +	case UPIO_MEM32:
> > +		writel(val, portaddr(port, reg));
> > +		break;
> > +	}
> > +}
> > +
> >  /* Byte-order aware bit setting/clearing functions. */
> >
> >  static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
> 
> thanks,
> --
> js
> suse labs

The purpose of this patch is to support 32bit access for registers, and it is also working exsisting device.
There are 3 operations what I have to to change which are rd_regb, wr_regb, and writeb.
rd_regb, wr_regb are changed to rd_reg, wr_reg.
and writeb is changed to wr_reg_barrier.
So I make as a one patch.

wr_reg_barrier is not a different patch, itis just replaced from writeb.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux