This add support for rotary encoders that use the counter subsystem to
expose an input device.
Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
---
drivers/input/misc/Kconfig | 9 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/rotary_encoder_counter.c | 152 ++++++++++++++++++++
3 files changed, 162 insertions(+)
create mode 100644 drivers/input/misc/rotary_encoder_counter.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7e2e658d551c..b91b4257e337 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -619,6 +619,15 @@ config INPUT_GPIO_ROTARY_ENCODER
To compile this driver as a module, choose M here: the
module will be called rotary_encoder.
+config INPUT_COUNTER_ROTARY_ENCODER
+ tristate "Rotary encoders connected to counter devices"
+ depends on COUNTER || COMPILE_TEST
+ help
+ Say Y here to add support for rotary encoders connected to counter devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rotary_encoder_counter.
+
config INPUT_RB532_BUTTON
tristate "Mikrotik Routerboard 532 button interface"
depends on MIKROTIK_RB532
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 8fd187f314bd..74bbe6d400a3 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
+obj-$(CONFIG_INPUT_COUNTER_ROTARY_ENCODER) += rotary_encoder_counter.o
obj-$(CONFIG_INPUT_RK805_PWRKEY) += rk805-pwrkey.o
obj-$(CONFIG_INPUT_SC27XX_VIBRA) += sc27xx-vibra.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
diff --git a/drivers/input/misc/rotary_encoder_counter.c b/drivers/input/misc/rotary_encoder_counter.c
new file mode 100644
index 000000000000..20017308f4f3
--- /dev/null
+++ b/drivers/input/misc/rotary_encoder_counter.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A rotary encoder driver using the generic counter interface.
+ *
+ * Author: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/counter.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+
+#define MAX_STEPS 24
+
+struct rotary_encoder {
+ struct input_dev *input;
+ u32 steps;
+ u32 axis;
+ bool relative_axis;
+ bool rollover;
+ long last_pos;
+ struct counter_device *counter;
+};
+
+static void rotary_encoder_poll(struct input_dev *input)
+{
+ struct rotary_encoder *encoder = input_get_drvdata(input);
+ long rotary_pos;
+ int ret;
+
+ ret = counter_count_get(encoder->counter, &rotary_pos);
+ if (ret)
+ return;
+
+ if (encoder->relative_axis) {
+ input_report_rel(encoder->input, encoder->axis,
+ rotary_pos - encoder->last_pos);
+ } else {
+ if (encoder->rollover)
+ rotary_pos %= encoder->steps;
+ input_report_abs(encoder->input, encoder->axis, rotary_pos);
+ }
+
+ encoder->last_pos = rotary_pos;
+ input_sync(encoder->input);
+}
+
+static int rotary_encoder_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct counter_device *counter;
+ struct rotary_encoder *encoder;
+ struct input_dev *input;
+ int qdec_mode;
+ u32 poll_interval;
+ int err;
+
+ encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL);
+ if (!encoder)
+ return -ENOMEM;
+
+ encoder->rollover =
+ device_property_read_bool(dev, "rollover");
+
+ device_property_read_u32(dev, "steps", &encoder->steps);
+
+ device_property_read_u32(dev, "linux-axis", &encoder->axis);
+
+ encoder->relative_axis =
+ device_property_read_bool(dev, "relative-axis");
+
+ counter = devm_counter_get(dev);
+ if (IS_ERR(counter))
+ return PTR_ERR(counter);
+
+ if (device_property_read_u32(dev, "qdec-mode", &qdec_mode)) {
+ dev_err(dev, "Invalid or missing quadrature mode\n");
+ return -EINVAL;
+ }
+
+ err = counter_function_set(counter, qdec_mode);
+ if (err) {
+ dev_err(dev, "Failed to set quadrature mode %d\n",
+ qdec_mode);
+ return err;
+ }
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ input_set_drvdata(input, encoder);
+ encoder->input = input;
+ encoder->counter = counter;
+ encoder->steps = (!encoder->steps) ? MAX_STEPS : encoder->steps;
+ input->name = pdev->name;
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = dev;
+
+ if (encoder->relative_axis)
+ input_set_capability(input, EV_REL, encoder->axis);
+ else
+ input_set_abs_params(input, encoder->axis, 0,
+ encoder->steps, 0, 1);
+
+ err = input_setup_polling(input, rotary_encoder_poll);
+ if (err)
+ return err;
+
+ if (!device_property_read_u32(dev, "poll-interval",
+ &poll_interval))
+ input_set_poll_interval(input, poll_interval);
+
+ err = input_register_device(input);
+ if (err) {
+ dev_err(dev, "failed to register device, err=%d\n", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, encoder);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id rotary_encoder_of_match[] = {
+ { .compatible = "rotary-encoder-counter", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rotary_encoder_of_match);
+#endif
+
+static struct platform_driver rotary_encoder_driver = {
+ .probe = rotary_encoder_probe,
+ .driver = {
+ .name = "rotary-encoder-counter",
+ .of_match_table = of_match_ptr(rotary_encoder_of_match),
+ }
+};
+module_platform_driver(rotary_encoder_driver);
+
+MODULE_DESCRIPTION("Counter rotary encoder driver");
+MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
2.25.0
