2014-05-16 7:14 GMT-07:00 Thomas Petazzoni
<thomas.petazzoni@xxxxxxxxxxxxxxxxxx>:
> Until now, the fixed_phy_add() function was taking as argument
> 'phy_id', which was used both as the PHY address on the fake fixed
> MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and
> MII_PHYSID2 registers. However, those two informations are completely
> unrelated.
>
> This patch decouples them. The PHY id of fixed PHYs is hardcoded to be
> 0x0. Ideally, a really reserved value would be nicer, but there
> doesn't seem to be an easy of making sure a dummy value can be
> assigned to the Linux kernel for such usage.
>
> The PHY address remains passed by the caller of phy_fixed_add().
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Tested-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---
> drivers/net/phy/fixed.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
> index ba55adf..e41546d 100644
> --- a/drivers/net/phy/fixed.c
> +++ b/drivers/net/phy/fixed.c
> @@ -31,7 +31,7 @@ struct fixed_mdio_bus {
> };
>
> struct fixed_phy {
> - int id;
> + int addr;
> u16 regs[MII_REGS_NUM];
> struct phy_device *phydev;
> struct fixed_phy_status status;
> @@ -104,8 +104,8 @@ static int fixed_phy_update_regs(struct fixed_phy *fp)
> if (fp->status.asym_pause)
> lpa |= LPA_PAUSE_ASYM;
>
> - fp->regs[MII_PHYSID1] = fp->id >> 16;
> - fp->regs[MII_PHYSID2] = fp->id;
> + fp->regs[MII_PHYSID1] = 0;
> + fp->regs[MII_PHYSID2] = 0;
>
> fp->regs[MII_BMSR] = bmsr;
> fp->regs[MII_BMCR] = bmcr;
> @@ -115,7 +115,7 @@ static int fixed_phy_update_regs(struct fixed_phy *fp)
> return 0;
> }
>
> -static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
> +static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
> {
> struct fixed_mdio_bus *fmb = bus->priv;
> struct fixed_phy *fp;
> @@ -124,7 +124,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
> return -1;
>
> list_for_each_entry(fp, &fmb->phys, node) {
> - if (fp->id == phy_id) {
> + if (fp->addr == phy_addr) {
> /* Issue callback if user registered it. */
> if (fp->link_update) {
> fp->link_update(fp->phydev->attached_dev,
> @@ -138,7 +138,7 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
> return 0xFFFF;
> }
>
> -static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
> +static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
> u16 val)
> {
> return 0;
> @@ -160,7 +160,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
> return -EINVAL;
>
> list_for_each_entry(fp, &fmb->phys, node) {
> - if (fp->id == phydev->phy_id) {
> + if (fp->addr == phydev->addr) {
> fp->link_update = link_update;
> fp->phydev = phydev;
> return 0;
> @@ -171,7 +171,7 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
> }
> EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
>
> -int fixed_phy_add(unsigned int irq, int phy_id,
> +int fixed_phy_add(unsigned int irq, int phy_addr,
> struct fixed_phy_status *status)
> {
> int ret;
> @@ -184,9 +184,9 @@ int fixed_phy_add(unsigned int irq, int phy_id,
>
> memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
>
> - fmb->irqs[phy_id] = irq;
> + fmb->irqs[phy_addr] = irq;
>
> - fp->id = phy_id;
> + fp->addr = phy_addr;
> fp->status = *status;
>
> ret = fixed_phy_update_regs(fp);
> --
> 1.9.3
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
