On 4/2/20 2:20 PM, Johan Jonker wrote:
> Hi Helen,
>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index fc0295d2a65a1..815099a0cd0dd 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -1718,6 +1718,33 @@ vopb_mmu: iommu@ff903f00 {
>> status = "disabled";
>> };
>>
>> + isp0: isp0@ff910000 {
>> + compatible = "rockchip,rk3399-cif-isp";
>> + reg = <0x0 0xff910000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&cru SCLK_ISP0>,
>> + <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>,
>> + <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>;
>> + clock-names = "clk_isp",
>> + "aclk_isp", "aclk_isp_wrap",
>> + "hclk_isp", "hclk_isp_wrap";
>
>> + power-domains = <&power RK3399_PD_ISP0>;
>> + iommus = <&isp0_mmu>;
>> + phys = <&mipi_dphy_rx0>;
>> + phy-names = "dphy";
>
> Maybe a little sort? But keep rest as it is. Also in example.
>
> iommus = <&isp0_mmu>;
> phys = <&mipi_dphy_rx0>;
> phy-names = "dphy";
> power-domains = <&power RK3399_PD_ISP0>;
Are you proposing only to move power-domains after phy? And keep the rest?
What is the main logic?
Thanks
Helen
>
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0>;
>
> Move reg above #address-cells. Change that in example as well.
>
> reg = <0>;
> #address-cells = <1>;
> #size-cells = <0>;
>
>> + };
>> + };
>> + };
>> +
>> isp0_mmu: iommu@ff914000 {
>> compatible = "rockchip,iommu";
>> reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
>> --
>> 2.26.0
>
