Am Donnerstag, 2. April 2020, 16:37:52 CEST schrieb Johan Jonker:
> On 4/2/20 4:31 PM, Heiko Stübner wrote:
> > Am Donnerstag, 2. April 2020, 15:48:02 CEST schrieb Johan Jonker:
> >> Hi Helen,
> >>
> >>> From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
> >>
> >>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> >>> index 33cc21fcf4c10..fc0295d2a65a1 100644
> >>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> >>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> >>> @@ -1394,6 +1394,17 @@ io_domains: io-domains {
> >>> status = "disabled";
> >>> };
> >>>
> >>
> >>> + mipi_dphy_rx0: mipi-dphy-rx0 {
> >>
> >> For Heiko sort syscon@ff770000 subnodes alphabetical or reg value first?
> >
> > Similar to main nodes ... so things without reg alphabetical,
> > the rest by reg address
> >
> alphabetical first:
>
> io-domains
> mipi-dphy-rx0
> usb2-phy@e450
like this ... aka similar to what we do in the core nodes.
For the record, pinctrl at the bottom of a soc.dtsi is ok.
Heiko
> .@..
>
> or
>
> with reg values first:
>
> .@..
> emmc_phy: phy@f780
> mipi-dphy-rx0
> pcie-phy
>
> >
> >>
> >>> + compatible = "rockchip,rk3399-mipi-dphy-rx0";
> >>> + clocks = <&cru SCLK_MIPIDPHY_REF>,
> >>
> >>> + <&cru SCLK_DPHY_RX0_CFG>,
> >>> + <&cru PCLK_VIO_GRF>;
> >>
> >> Align ^
> >>
> >>> + clock-names = "dphy-ref", "dphy-cfg", "grf";
> >>> + power-domains = <&power RK3399_PD_VIO>;
> >>> + #phy-cells = <0>;
> >>> + status = "disabled";
> >>> + };
> >>> +
> >>> u2phy0: usb2-phy@e450 {
> >>> compatible = "rockchip,rk3399-usb2phy";
> >>> reg = <0xe450 0x10>;
> >>
> >>
> >
> >
> >
> >
>
>
