[PATCH 0/4] move Rockchip ISP bindings out of staging / add ISP DT nodes for RK3399

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move the bindings out of drivers/staging and place them in
Documentation/devicetree/bindings instead.

Also, add DT nodes for RK3399 and verify with make ARCH=arm64 dtbs_check

Tested by verifying images streamed from RockPi 4 board with imx219
module.

Helen Koike (2):
  dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0
    bindings out of staging
  dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging

Shunqian Zheng (2):
  arm64: dts: rockchip: add rx0 mipi-phy for rk3399
  arm64: dts: rockchip: add isp0 node for rk3399

 .../bindings/media/rockchip-isp1.yaml         |  0
 .../bindings/phy/rockchip-mipi-dphy-rx0.yaml  |  0
 arch/arm64/boot/dts/rockchip/rk3399.dtsi      | 38 +++++++++++++++++++
 3 files changed, 38 insertions(+)
 rename {drivers/staging/media/rkisp1/Documentation => Documentation}/devicetree/bindings/media/rockchip-isp1.yaml (100%)
 rename {drivers/staging/media/phy-rockchip-dphy-rx0/Documentation => Documentation}/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml (100%)

-- 
2.26.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux