On Wed, Apr 01, 2020 at 11:57:32AM +0200, Oleksij Rempel wrote:
> The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set
> for the values that comprise the fields, not zero-bits-set.
>
> This patch fixes the clock frequency configuration for ATH8030 and
> ATH8035 Atheros PHYs by removing the erroneous "~".
>
> To reproduce this bug, configure the PHY with the device tree binding
> "qca,clk-out-frequency" and remove the machine specific PHY fixups.
>
> Fixes: 2f664823a47021 ("net: phy: at803x: add device tree binding")
> Reported-by: Russell King <linux@xxxxxxxxxxxxxxx>
Please replace this with:
Reported-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Reviewed-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Tested-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Thanks.
> ---
> drivers/net/phy/at803x.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index 481cf48c9b9e4..31f731e6df720 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -425,8 +425,8 @@ static int at803x_parse_dt(struct phy_device *phydev)
> */
> if (at803x_match_phy_id(phydev, ATH8030_PHY_ID) ||
> at803x_match_phy_id(phydev, ATH8035_PHY_ID)) {
> - priv->clk_25m_reg &= ~AT8035_CLK_OUT_MASK;
> - priv->clk_25m_mask &= ~AT8035_CLK_OUT_MASK;
> + priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
> + priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
> }
> }
>
> --
> 2.26.0.rc2
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up
