On 12/05/14 12:12, Jyri Sarha wrote:
> Adds a simple-card sound node for HDMI audio, the associated
> hdmi-codec node, and sound-dai-cells propeties to the DAI nodes.
>
> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
> ---
> arch/arm/boot/dts/omap4-panda-common.dtsi | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
> index d2c45bf..c04f453 100644
> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
> @@ -41,7 +41,7 @@
> };
> };
>
> - sound: sound {
> + sound: sound@0 {
> compatible = "ti,abe-twl6040";
> ti,model = "PandaBoard";
>
> @@ -65,6 +65,24 @@
> "AFMR", "Line In";
> };
>
> + sound@1 {
> + compatible = "simple-audio-card";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&hdmi>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&hdmi_audio>;
> + };
> + };
> +
> + hdmi_audio: hdmi_audio@0 {
> + #sound-dai-cells = <0>;
> + compatible = "linux,hdmi-audio";
> + status = "okay";
> + };
> +
> /* HS USB Port 1 Power */
> hsusb1_power: hsusb1_power_reg {
> compatible = "regulator-fixed";
> @@ -512,6 +530,7 @@
> };
>
> &hdmi {
> + #sound-dai-cells = <0>;
> status = "ok";
> vdda-supply = <&vdac>;
Maybe this is how this has to be done, but I'll still ask:
Considering that the HDMI audio is basically inseparable part of the
OMAP HDMI video, and if a board has HDMI video connector connected to
the SoC's HDMI, then it has HDMI audio.
So all of the above .dts changes are already implied when we have HDMI
video on the board. Is there no way to prevent every board needing to
add those exact same nodes to get HDMI audio?
Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
