On Wed, 25 Mar 2020 12:04:54 +0530, Amit Kucheria wrote: > As part of moving the thermal bindings to YAML, split it up into 3 > bindings: thermal sensors, cooling devices and thermal zones. > > The thermal-zone binding is a software abstraction to capture the > properties of each zone - how often they should be checked, the > temperature thresholds (trips) at which mitigation actions need to be > taken and the level of mitigation needed at those thresholds. > > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> > --- > Changes since v2: > - Addressed review comment from Rob > - Added required properties for thermal-zones node > - Added select: true to thermal-cooling-devices.yaml > - Fixed up example to pass dt_binding_check > > .../bindings/thermal/thermal-zones.yaml | 324 ++++++++++++++++++ > 1 file changed, 324 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml > The change discussed doesn't affect the schema other than adding a 'maxItems: 1', so: Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
