On 3/31/20 9:40 AM, Sowjanya Komatineni wrote:
On 3/31/20 4:52 AM, Laurent Pinchart wrote:
External email: Use caution opening links or attachments
Hello,
On Tue, Mar 31, 2020 at 01:27:19PM +0200, Hans Verkuil wrote:
On 3/31/20 1:10 PM, Sakari Ailus wrote:
On Tue, Mar 31, 2020 at 12:56:57PM +0200, Hans Verkuil wrote:
On 3/31/20 12:32 PM, Sakari Ailus wrote:
On Mon, Mar 30, 2020 at 12:59:15PM +0200, Hans Verkuil wrote:
On 3/25/20 12:03 PM, Sakari Ailus wrote:
On Mon, Mar 23, 2020 at 10:52:32AM -0700, Sowjanya Komatineni
wrote:
Tegra210 contains a powerful Video Input (VI) hardware controller
which can support up to 6 MIPI CSI camera sensors.
Each Tegra CSI port can be one-to-one mapped to VI channel and
can
capture from an external camera sensor connected to CSI or from
built-in test pattern generator.
Tegra210 supports built-in test pattern generator from CSI to VI.
This patch adds a V4L2 media controller and capture driver
support
for Tegra210 built-in CSI to VI test pattern generator.
Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
drivers/staging/media/Kconfig | 2 +
drivers/staging/media/Makefile | 1 +
drivers/staging/media/tegra/Kconfig | 10 +
drivers/staging/media/tegra/Makefile | 8 +
drivers/staging/media/tegra/TODO | 10 +
drivers/staging/media/tegra/tegra-common.h | 263 +++++++
drivers/staging/media/tegra/tegra-csi.c | 522 ++++++++++++++
drivers/staging/media/tegra/tegra-csi.h | 118 ++++
drivers/staging/media/tegra/tegra-vi.c | 1058
++++++++++++++++++++++++++++
drivers/staging/media/tegra/tegra-vi.h | 83 +++
drivers/staging/media/tegra/tegra-video.c | 129 ++++
drivers/staging/media/tegra/tegra-video.h | 32 +
drivers/staging/media/tegra/tegra210.c | 754
++++++++++++++++++++
drivers/staging/media/tegra/tegra210.h | 192 +++++
Why staging? Are there reasons not to aim this to the kernel
proper right
away? If you only support TPG, the driver may not have too many
(if any)
real users anyway.
14 files changed, 3182 insertions(+)
create mode 100644 drivers/staging/media/tegra/Kconfig
create mode 100644 drivers/staging/media/tegra/Makefile
create mode 100644 drivers/staging/media/tegra/TODO
create mode 100644 drivers/staging/media/tegra/tegra-common.h
create mode 100644 drivers/staging/media/tegra/tegra-csi.c
create mode 100644 drivers/staging/media/tegra/tegra-csi.h
create mode 100644 drivers/staging/media/tegra/tegra-vi.c
create mode 100644 drivers/staging/media/tegra/tegra-vi.h
create mode 100644 drivers/staging/media/tegra/tegra-video.c
create mode 100644 drivers/staging/media/tegra/tegra-video.h
create mode 100644 drivers/staging/media/tegra/tegra210.c
create mode 100644 drivers/staging/media/tegra/tegra210.h
<snip>
+static int tegra_channel_g_input(struct file *file, void *priv,
+ unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int tegra_channel_s_input(struct file *file, void *priv,
+ unsigned int input)
+{
+ if (input > 0)
+ return -EINVAL;
+
+ return 0;
+}
Please see patchset on topic "v4l2-dev/ioctl: Add
V4L2_CAP_IO_MC" on
linux-media; it's relevant here, too.
No, it isn't. The pipeline is controlled by the driver, not by
userspace.
This is a regular video capture driver, not an ISP driver.
I don't think that really makes a difference, whether a device is
an ISP or
not, but instead what does is whether there is something to
control in its
pipeline that cannot be generally done through the regular V4L2
interface.
Even plain CSI-2 receiver drivers should be media device centric
these days
as doing otherwise excludes using a range of sensor drivers with
them,
including any possible future support for e.g. sensor embedded data.
We've been back and forth on this before for this driver. I see no
reason to make things
complicated, these are simple video pipelines for video capture.
Making this media
device centric means that existing software using the BSP version
of this driver require
a full rewrite, which is not desirable.
If we are going to require CSI receiver drivers to be media
centric, then that's a
major departure of existing practice. And something that needs to
be discussed first,
I'd be happy to discuss that.
Either way, the current design is problematic as it excludes a
range of
camera sensors being used with the driver --- addressing of which
requires
converting the driver MC centric. If the driver is merged to
mainline, then
the user might face a Kconfig option or a module parameter to choose
between the two --- this defines uAPI behaviour after all.
The only way to avoid that in the future is to make it MC-centric
right
away.
since that will require that support for each csi receiver driver
is added to libcamera.
Is libcamera ready for that? Are common applications using
libcamera yet?
Obviously, if NVIDIA decides that this is worth the effort, then I
have no objection.
But I don't think it is something we should require at this stage.
Works for me. But in that case NVIDIA should also be aware that
doing so
has consequences.
We also haven't discussed what to do with old V4L2-centric drivers
which
you'd use with sensors that expose their own subdevs. The
proportion of all
sensors might not be large currently but it is almost certainly
bound to
grow in the future.
FWIW, Intel ipu3-cio2 CSI-2 receiver driver is MC-centric e.g. for the
above reasons. Libcamera supports it currently. I'll let Laurent
(cc'd)
comment on the details.
I think it would be good to at least describe in some detail what
you gain
by taking the media centric route, and what the obstacles are (loss
of compatibility
with existing applications, requiring libcamera support).
In this case the main gain is control of the camera sensor. Sensors can
appear as simple when you don't look too closely at them, but many
sensors (especially the ones modelled after SMIA++ and the now standard
- and open! - MIPI CCS specification) have 3 locations to perform
cropping (analog, digital and output), and 3 locations to perform
scaling (binning, skipping, and full-featured scaler). All of these need
to be controlled by userspace one way or another if you want to
implement proper camera algorithms, which those platforms target.
Thanks Laurent/Sakari/Hans.
Based on discussion, seems like its good to change driver now to
media-centric rather than later.
As Jetson is devkit and custom camera sensor module meeting spec can
be used, its good to let sensor control to user space.
Will look into and update to use media-centric APIs.
Will discuss this internally and will get back on this...
My personal feeling has always been that for ISP drivers the pros of
making
a media-centric driver outweigh the cons, but that for a standard
video capture
pipeline without complex processing blocks the cons outweigh the pros.
This might change if libcamera becomes widely used, but we're not
there yet.
To be honest, I am not opposed to having a kernel config option for
drivers
like this that select the media-centric API vs a regular API, if
that can be
done without too much work. If you need full control for your
embedded system,
then you enable the option. If you want full compatibility with
existing
applications, then disable it.
How would distributions be supposed to handle those ? That could in the
end need to be a per-driver option, and it would be very messy. Maybe
it's unavoidable, I'm trying to figure out a way to avoid such an option
for sensor drivers, to decide to expose them as a single subdev or
multiple subdevs in order to support multiple streams CSI-2 streams, and
I'm not sure I'll succeed.
--
Regards,
Laurent Pinchart
