On Tue, Mar 31, 2020 at 6:31 PM Rob Herring <robh@xxxxxxxxxx> wrote: > > On Mon, 30 Mar 2020 18:43:29 +0200, Robert Marko wrote: > > This patch adds the binding documentation for the HS/SS USB PHY found > > inside Qualcom Dakota SoCs. > > > > Signed-off-by: John Crispin <john@xxxxxxxxxxx> > > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx> > > Cc: Luka Perkov <luka.perkov@xxxxxxxxxx> > > --- > > Changes from v4 to v5: > > * Replace tabs with whitespaces > > * Add maintainer property > > > > .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 48 +++++++++++++++++++ > > 1 file changed, 48 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > Error: Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.example.dts:21.25-26 syntax error > FATAL ERROR: Unable to parse input tree > scripts/Makefile.lib:311: recipe for target 'Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.example.dt.yaml' failed > make[1]: *** [Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.example.dt.yaml] Error 1 > make[1]: *** Waiting for unfinished jobs.... > Makefile:1262: recipe for target 'dt_binding_check' failed > make: *** [dt_binding_check] Error 2 > > See https://patchwork.ozlabs.org/patch/1264091 > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure dt-schema is up to date: > > pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade > > Please check and re-submit. Hi Rob, I tested locally before submitting and it will pass. It appears that the bot will fail in your tree as a patch to add DT nodes is part of the series and not yet upstream. Best regards Robert
