On Mon, 30 Mar 2020 14:35:42 +0300, Adrian Ratiu wrote: > This provides an example DT binding for the MIPI DSI host controller > present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP. > > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxx> > Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> > Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> > --- > Changes since v4: > - Fixed yaml binding to pass `make dt_binding_check dtbs_check` > and addressed received binding feedback (Rob) > > Changes since v3: > - Added commit message (Neil) > - Converted to yaml format (Neil) > - Minor dt node + driver fixes (Rob) > - Added small panel example to the host controller binding > > Changes since v2: > - Fixed commit tags (Emil) > --- > .../display/imx/fsl,mipi-dsi-imx6.yaml | 134 ++++++++++++++++++ > 1 file changed, 134 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml > My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:34.21-31: Warning (reg_format): /example-0/dsi@21e0000/ports/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (avoid_default_addr_size): /example-0/dsi@21e0000/ports/port@1: Relying on default #address-cells value Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (avoid_default_addr_size): /example-0/dsi@21e0000/ports/port@1: Relying on default #size-cells value Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (graph_port): /example-0/dsi@21e0000/ports/port@1: graph node '#address-cells' is -1, must be 1 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.example.dts:33.24-38.19: Warning (graph_port): /example-0/dsi@21e0000/ports/port@1: graph node '#size-cells' is -1, must be 0 See https://patchwork.ozlabs.org/patch/1263893 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
