[PATCH v4 0/2] iio: proximity: driver for vcnl3020

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add proximity sensor driver for Vishay vcnl3020. Only on-demand
measurement is supported for now.

Changes from v3:
   1. minor changes.
   2. add i2c block to fix dts section in yaml.

Changes from v2:
   1. using regmap_read_poll_timeout instead of do-while in measurement
      function.
   2. change struct i2client* in vcnl3020_data to struct dev*
   3. enable REGMAP_I2C in Kconfig

Changes from v1:
   1. using regmap interface instead of i2c_smbus_* calls.
   2. switch from probe to probe_new.
   3. s32/int32_t -> int

Ivan Mikhaylov (2):
  iio: proximity: provide device tree binding document
  iio: proximity: Add driver support for vcnl3020 proximity sensor

 .../bindings/iio/proximity/vcnl3020.yaml      |  52 ++++
 drivers/iio/proximity/Kconfig                 |  11 +
 drivers/iio/proximity/Makefile                |   1 +
 drivers/iio/proximity/vcnl3020.c              | 232 ++++++++++++++++++
 4 files changed, 297 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/vcnl3020.yaml
 create mode 100644 drivers/iio/proximity/vcnl3020.c

-- 
2.21.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux