On Tue, 03 Mar 2020, Abel Vesa wrote:
> Some of the i.MX SoCs have a IP for interfacing the dedicated IPs with
> clocks, resets and interrupts, plus some other specific control registers.
> To allow the functionality to be split between drivers, this MFD driver is
> added that has only two purposes: register the devices and map the entire
> register addresses. Everything else is left to the dedicated drivers that will
> bind to the registered devices.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
> ---
> drivers/mfd/Kconfig | 11 +++++++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/imx-mix.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 60 insertions(+)
> create mode 100644 drivers/mfd/imx-mix.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3c547ed..3c89288 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -460,6 +460,17 @@ config MFD_MX25_TSADC
> i.MX25 processors. They consist of a conversion queue for general
> purpose ADC and a queue for Touchscreens.
>
> +config MFD_IMX_MIX
> + tristate "NXP i.MX Generic Mix Control Driver"
> + depends on OF || COMPILE_TEST
> + help
> + Enable generic mixes support. On some i.MX platforms, there are
> + devices that are a mix of multiple functionalities like reset
> + controllers, clock controllers and some others. In order to split
> + those functionalities between the right drivers, this MFD populates
> + with virtual devices based on what's found in the devicetree node,
> + leaving the rest of the behavior control to the dedicated driver.
> +
> config MFD_HI6421_PMIC
> tristate "HiSilicon Hi6421 PMU/Codec IC"
> depends on OF
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index f935d10..5b2ae5d 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
> obj-$(CONFIG_TWL6040_CORE) += twl6040.o
>
> obj-$(CONFIG_MFD_MX25_TSADC) += fsl-imx25-tsadc.o
> +obj-$(CONFIG_MFD_IMX_MIX) += imx-mix.o
>
> obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o
> obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o
> diff --git a/drivers/mfd/imx-mix.c b/drivers/mfd/imx-mix.c
> new file mode 100644
> index 00000000..d3f8c71
> --- /dev/null
> +++ b/drivers/mfd/imx-mix.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2019 NXP.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/spinlock.h>
> +#include <linux/types.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +
> +#include <linux/mfd/core.h>
> +
> +static int imx_audiomix_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + void __iomem *base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + dev_set_drvdata(dev, base);
> +
> + return devm_of_platform_populate(dev);
> +}
> +
> +static const struct of_device_id imx_audiomix_of_match[] = {
> + { .compatible = "fsl,imx8mp-audiomix" },
> + { /* Sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, imx_audiomix_of_match);
This needs DT binding documentation.
Do the sub-device memory ranges overlap?
> +static struct platform_driver imx_audiomix_driver = {
> + .probe = imx_audiomix_probe,
> + .driver = {
> + .name = "imx-audiomix",
> + .of_match_table = of_match_ptr(imx_audiomix_of_match),
> + },
> +};
> +module_platform_driver(imx_audiomix_driver);
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
