This series adds interconnect scaling support for imx8m series chips. It uses a per-SOC interconnect provider layered on top of multiple instances of devfreq for scalable nodes along the interconnect. Existing qcom interconnect providers mostly translate bandwidth requests into firmware calls but equivalent firmware on imx8m is much thinner. Scaling support for individual nodes is implemented as distinct devfreq drivers instead. The imx interconnect provider doesn't communicate with devfreq directly but rather computes "minimum frequencies" for nodes along the path and creates dev_pm_qos requests. Since there is no single devicetree node that can represent the "interconnect" the main NOC is picked as the "interconnect provider" and will probe the interconnect platform device if #interconnect-cells is present. This avoids introducing "virtual" devices but it means that DT bindings of main NOC includes properties for both devfreq and interconnect. Only the ddrc and main noc are scalable right now but more can be added. Also available on a github branch (with various unrelated changes): https://github.com/cdleonard/linux/tree/next Testing currently requires NXP branch of atf+uboot Martin: I believe you should be able to use this to control DRAM frequency from video by just adding interconnect consumer code to nwl-dsi. Sample code: https://github.com/cdleonard/linux/commit/43772762aa5045f1ce5623740f9a4baef988d083 https://github.com/cdleonard/linux/commit/7b601e981b1f517b5d98b43bde292972ded13086 Changes since RFCv6: * Replace scalable-nodes stuff with just a fsl,ddrc property. Future scalable nodes can be added as additional phandles on the NOC * Allow building interconnect drivers as modules * Handle icc_provider_del errors in imx_icc_unregister (like EBUSY). * Rename imx-devfreq to imx-bus, similar to exynos-bus * Explain why imx bus clock enabling is not required * All dependencies accepted (some time ago). Link: https://patchwork.kernel.org/cover/11244421/ Changes since RFCv5: * Replace scanning for interconnect-node-id with explicit scalable-nodes/scalable-node-ids property on NoC. * Now passes make `dtbs_check` * Remove struct imx_icc_provider * Switch to of_icc_xlate_onecell * Use of_find_device_by_node to fetch QoS target, this causes fewer probe deferrals, removes dependency on devfreq API and even allows reloading ddrc module at runtime * Add imx_icc_node_destroy helper * Remove 0/1 on DEFINE_BUS_SLAVE/MASTER which created spurious links Link: https://patchwork.kernel.org/cover/11222015/ Changes since RFCv4: * Drop icc proxy nonsense * Make devfreq driver for NOC probe the ICC driver if #interconnect-cells is present * Move NOC support to interconnect series and rename the node in DT * Add support for all chips at once, differences are not intereseting and there is more community interest for 8mq than 8mm. Link: https://patchwork.kernel.org/cover/11111865/ Changes since RFCv3: * Remove the virtual "icc" node and add devfreq nodes as proxy providers * Fix build on 32-bit arm (reported by kbuilt test robot) * Remove ARCH_MXC_ARM64 (never existed in upstream) * Remove _numlinks, calculate instead * Replace __BUSFREQ_H header guard * Improve commit message and comment spelling * Fix checkpatch issues Link to RFCv3: https://patchwork.kernel.org/cover/11078671/ Changes since RFCv2 and initial work by Alexandre Bailon: * Relying on devfreq and dev_pm_qos instead of CLK * No more "platform opp" stuff * No more special suspend handling: use suspend-opp on devfreq instead * Replace all mentions of "busfreq" with "interconnect" Link to v2: https://patchwork.kernel.org/cover/11021563/ Leonard Crestez (8): dt-bindings: interconnect: Add bindings for imx8m noc PM / devfreq: Add generic imx bus scaling driver PM / devfreq: imx: Register interconnect device interconnect: Add imx core driver interconnect: imx: Add platform driver for imx8mm interconnect: imx: Add platform driver for imx8mq interconnect: imx: Add platform driver for imx8mn arm64: dts: imx8m: Add NOC nodes .../bindings/interconnect/fsl,imx8m-noc.yaml | 138 ++++++++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 24 ++ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 24 ++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 24 ++ drivers/devfreq/Kconfig | 9 + drivers/devfreq/Makefile | 1 + drivers/devfreq/imx-bus.c | 181 +++++++++++ drivers/interconnect/Kconfig | 1 + drivers/interconnect/Makefile | 1 + drivers/interconnect/imx/Kconfig | 17 + drivers/interconnect/imx/Makefile | 9 + drivers/interconnect/imx/imx.c | 298 ++++++++++++++++++ drivers/interconnect/imx/imx.h | 62 ++++ drivers/interconnect/imx/imx8mm.c | 108 +++++++ drivers/interconnect/imx/imx8mn.c | 97 ++++++ drivers/interconnect/imx/imx8mq.c | 106 +++++++ include/dt-bindings/interconnect/imx8mm.h | 49 +++ include/dt-bindings/interconnect/imx8mn.h | 41 +++ include/dt-bindings/interconnect/imx8mq.h | 48 +++ 19 files changed, 1238 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml create mode 100644 drivers/devfreq/imx-bus.c create mode 100644 drivers/interconnect/imx/Kconfig create mode 100644 drivers/interconnect/imx/Makefile create mode 100644 drivers/interconnect/imx/imx.c create mode 100644 drivers/interconnect/imx/imx.h create mode 100644 drivers/interconnect/imx/imx8mm.c create mode 100644 drivers/interconnect/imx/imx8mn.c create mode 100644 drivers/interconnect/imx/imx8mq.c create mode 100644 include/dt-bindings/interconnect/imx8mm.h create mode 100644 include/dt-bindings/interconnect/imx8mn.h create mode 100644 include/dt-bindings/interconnect/imx8mq.h -- 2.17.1
