Add pm_8998 GPIO trace names. These names are defined in
the 96boards db845c mezzanine schematic.
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v1:
- Move gpio-names to previous reference to pm8998_gpio label
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6b6837c3d68..efb0086e2aa1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -365,6 +365,34 @@ &mss_pil {
};
&pm8998_gpio {
+ gpio-line-names =
+ "NC",
+ "NC",
+ "WLAN_SW_CTRL",
+ "NC",
+ "PM_GPIO5_BLUE_BT_LED",
+ "VOL_UP_N",
+ "NC",
+ "ADC_IN1",
+ "PM_GPIO9_YEL_WIFI_LED",
+ "CAM0_AVDD_EN",
+ "NC",
+ "CAM0_DVDD_EN",
+ "PM_GPIO13_GREEN_U4_LED",
+ "DIV_CLK2",
+ "NC",
+ "NC",
+ "NC",
+ "SMB_STAT",
+ "NC",
+ "NC",
+ "ADC_IN2",
+ "OPTION1",
+ "WCSS_PWR_REQ",
+ "PM845_GPIO24",
+ "OPTION2",
+ "PM845_SLB";
+
vol_up_pin_a: vol-up-active {
pins = "gpio6";
function = "normal";
--
2.25.1
