Proximity sensor driver based on light/vcnl4000.c code. For now supports only the single on-demand measurement. The VCNL3020 is a fully integrated proximity sensor. Fully integrated means that the infrared emitter is included in the package. It has 16-bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Datasheet available at: http://www.vishay.com/docs/84150/vcnl3020.pdf Signed-off-by: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx> --- drivers/iio/proximity/Kconfig | 10 ++ drivers/iio/proximity/Makefile | 1 + drivers/iio/proximity/vcnl3020.c | 233 +++++++++++++++++++++++++++++++ 3 files changed, 244 insertions(+) create mode 100644 drivers/iio/proximity/vcnl3020.c diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index d53601447da4..936cd181916a 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -123,4 +123,14 @@ config VL53L0X_I2C To compile this driver as a module, choose M here: the module will be called vl53l0x-i2c. +config VCNL3020 + tristate "VCNL3020 proximity sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL3020 + proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called vcnl3020. + endmenu diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index 0bb5f9de13d6..96b6330e90ff 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -13,4 +13,5 @@ obj-$(CONFIG_SRF04) += srf04.o obj-$(CONFIG_SRF08) += srf08.o obj-$(CONFIG_SX9500) += sx9500.o obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o +obj-$(CONFIG_VCNL3020) += vcnl3020.o diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c new file mode 100644 index 000000000000..f6d9a21eed0b --- /dev/null +++ b/drivers/iio/proximity/vcnl3020.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * vcnl3020.c - Support for Vishay VCNL3020 proximity sensor + * + * based on vcnl4000.c + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VCNL_DRV_NAME "vcnl3020" +#define VCNL3020_PROD_ID 0x21 + +#define VCNL_COMMAND 0x80 /* Command register */ +#define VCNL_PROD_REV 0x81 /* Product ID and Revision ID */ +#define VCNL_PROXIMITY_RATE 0x82 /* Rate of Proximity Measurement */ +#define VCNL_LED_CURRENT 0x83 /* IR LED current for proximity mode */ +#define VCNL_PS_RESULT_HI 0x87 /* Proximity result register, MSB */ +#define VCNL_PS_RESULT_LO 0x88 /* Proximity result register, LSB */ +#define VCNL_PS_ICR 0x89 /* Interrupt Control Register */ + +#define VCNL_PS_LO_THR_HI 0x8a /* High byte of low threshold value */ +#define VCNL_PS_LO_THR_LO 0x8b /* Low byte of low threshold value */ +#define VCNL_PS_HI_THR_HI 0x8c /* High byte of high threshold value */ +#define VCNL_PS_HI_THR_LO 0x8d /* Low byte of high threshold value */ +#define VCNL_ISR 0x8e /* Interrupt Status Register */ +#define VCNL_PS_MOD_ADJ 0x8f /* Proximity Modulator Timing Adjustment */ + +/* Bit masks for COMMAND register */ +#define VCNL_PS_RDY BIT(5) /* proximity data ready? */ +#define VCNL_PS_OD BIT(3) /* start on-demand proximity + * measurement + */ + +struct vcnl3020_data { + struct i2c_client *client; + u32 rev; + struct mutex vcnl3020_lock; /* for i2c operations */ +}; + +static const struct i2c_device_id vcnl3020_id[] = { + { "vcnl3020", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, vcnl3020_id); + +static int32_t vcnl3020_init(struct vcnl3020_data *data) +{ + s32 rc; + u32 led_current; + struct device *dev = &data->client->dev; + + rc = device_property_read_u32(dev, "led-current", &led_current); + if (rc) { + dev_err(dev, "Couldn't get led current (%d)", rc); + goto exit; + } + + rc = i2c_smbus_read_byte_data(data->client, VCNL_PROD_REV); + if (rc < 0) { + dev_err(dev, "Error (%d) reading product revision", rc); + goto exit; + } + + if (rc == VCNL3020_PROD_ID) { + data->rev = rc & 0xff; + mutex_init(&data->vcnl3020_lock); + } else { + dev_err(dev, "Product id (%x) did not match vcnl3020 (%x)", rc, + VCNL3020_PROD_ID); + rc = -ENODEV; + goto exit; + } + + /* set led current */ + rc = i2c_smbus_write_byte_data(data->client, VCNL_LED_CURRENT, + led_current); + if (rc < 0) { + dev_err(dev, "Error (%d) setting LED current", rc); + goto exit; + } + + return 0; +exit: + return rc; +}; + +static int32_t vcnl3020_measure_proximity(struct vcnl3020_data *data, + int32_t *val) +{ + s32 tries = 20; + s32 rc; + + mutex_lock(&data->vcnl3020_lock); + + rc = i2c_smbus_write_byte_data(data->client, VCNL_COMMAND, + VCNL_PS_OD); + if (rc < 0) + goto fail; + + /* wait for data to become ready */ + while (tries--) { + rc = i2c_smbus_read_byte_data(data->client, VCNL_COMMAND); + if (rc < 0) + goto fail; + if (rc & VCNL_PS_RDY) + break; + msleep(20); /* measurement takes up to 100 ms */ + } + + if (tries < 0) { + dev_err(&data->client->dev, + "vcnl3020_measure() failed, data is not ready"); + rc = -EIO; + goto fail; + } + + rc = i2c_smbus_read_byte_data(data->client, VCNL_PS_RESULT_HI); + if (rc < 0) + goto fail; + *val = (rc & 0xff) << 8; + dev_dbg(&data->client->dev, "result high byte 0x%x", rc); + + rc = i2c_smbus_read_byte_data(data->client, VCNL_PS_RESULT_LO); + if (rc < 0) + goto fail; + *val |= rc & 0xff; + dev_dbg(&data->client->dev, "result low byte 0x%x", rc); + +fail: + mutex_unlock(&data->vcnl3020_lock); + + return rc; +} + +static const struct iio_chan_spec vcnl3020_channels[] = { + { + .type = IIO_PROXIMITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + } +}; + +static int32_t vcnl3020_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + s32 *val, s32 *val2, long mask) +{ + s32 rc; + struct vcnl3020_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_PROXIMITY: + rc = vcnl3020_measure_proximity(data, val); + if (rc < 0) + return rc; + return IIO_VAL_INT; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const struct iio_info vcnl3020_info = { + .read_raw = vcnl3020_read_raw, +}; + +static int32_t vcnl3020_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct vcnl3020_data *data; + struct iio_dev *indio_dev; + s32 rc; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + rc = vcnl3020_init(data); + if (rc < 0) + goto out; + + dev_info(&client->dev, "Proximity sensor, Rev: %02x\n", + data->rev); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &vcnl3020_info; + indio_dev->channels = vcnl3020_channels; + indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels); + indio_dev->name = VCNL_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + + rc = devm_iio_device_register(&client->dev, indio_dev); + if (rc != 0) + goto out; + + return rc; +out: + devm_iio_device_free(&client->dev, indio_dev); + return rc; +} + +static const struct of_device_id vcnl3020_of_match[] = { + { + .compatible = "vishay,vcnl3020", + }, +}; +MODULE_DEVICE_TABLE(of, vcnl3020_of_match); + +static struct i2c_driver vcnl3020_driver = { + .driver = { + .name = VCNL_DRV_NAME, + .of_match_table = vcnl3020_of_match, + }, + .probe = vcnl3020_probe, + .id_table = vcnl3020_id, +}; +module_i2c_driver(vcnl3020_driver); + +MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>"); +MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver"); +MODULE_LICENSE("GPL"); -- 2.21.1
