On Fri, 20 Mar 2020 17:01:14 +0200 Alexandru Lazar <alazar@xxxxxxxxxxxxx> wrote: > Add device-tree bindings documentation for the MAX1241 device driver. > > Signed-off-by: Alexandru Lazar <alazar@xxxxxxxxxxxxx> Please consider also adding the vdd-supply. It's not really required, but if you don't add it from the start chances are high that at some point someone else will need to add it. One trivial thing inline. Otherwise looks good to me. > --- > .../bindings/iio/adc/maxim,max1241.yaml | 61 +++++++++++++++++++ > 1 file changed, 61 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml > new file mode 100644 > index 000000000000..de41d422ce3b > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml > @@ -0,0 +1,61 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright 2020 Ioan-Alexandru Lazar > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim MAX1241 12-bit, single-channel analog to digital converter > + > +maintainers: > + - Ioan-Alexandru Lazar <alazar@xxxxxxxxxxxxx> > + > +description: | > + Bindings for the max1241 12-bit, single-channel ADC device. This > + driver supports voltage reading and can optionally be configured for Driver shouldn't be mentioned in the binding. It's a description of the hardware only. > + power-down mode operation. The datasheet can be found at: > + https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf > + > +properties: > + compatible: > + enum: > + - maxim,max1241 > + > + reg: > + maxItems: 1 > + > + vref-supply: > + description: > + Device tree identifier of the regulator that provides the external > + reference voltage. > + maxItems: 1 > + > + shdn-gpios: > + description: > + GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If > + specified, the /SHDN pin will be asserted between conversions, > + thus enabling power-down mode. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - vref-supply > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + spi0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "maxim,max1241"; > + reg = <0>; > + vref-supply = <&vdd_3v3_reg>; > + spi-max-frequency = <1000000>; > + shdn-gpios = <&gpio 26 1>; > + }; > + }; > + > +
