The KR070PE2T is a 7" panel with a resolution of 800x480.
KR070PE2T is the marking present on the ribbon cable. As this panel is
probably available under different brands, this marking will catch
most devices.
As I can't find a datasheet for this panel, the bus_flags are instead
from trial-and-error. The flags seem to be common for these kind of
panels as well.
Signed-off-by: Pascal Roeleven <dev@xxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index e14c14ac6..b3d257257 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2842,6 +2842,32 @@ static const struct panel_desc shelly_sca07010_bfn_lnn = {
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
};
+static const struct drm_display_mode starry_kr070pe2t_mode = {
+ .clock = 33000,
+ .hdisplay = 800,
+ .hsync_start = 800 + 209,
+ .hsync_end = 800 + 209 + 1,
+ .htotal = 800 + 209 + 1 + 45,
+ .vdisplay = 480,
+ .vsync_start = 480 + 22,
+ .vsync_end = 480 + 22 + 1,
+ .vtotal = 480 + 22 + 1 + 22,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc starry_kr070pe2t = {
+ .modes = &starry_kr070pe2t_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct drm_display_mode starry_kr122ea0sra_mode = {
.clock = 147000,
.hdisplay = 1920,
@@ -3474,6 +3500,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "shelly,sca07010-bfn-lnn",
.data = &shelly_sca07010_bfn_lnn,
+ }, {
+ .compatible = "starry,kr070pe2t",
+ .data = &starry_kr070pe2t,
}, {
.compatible = "starry,kr122ea0sra",
.data = &starry_kr122ea0sra,
--
2.20.1
