Hi, On 3/9/2020 3:23 PM, Sandeep Maheswaram wrote: > Converting dt binding to yaml. > Adding compatible for SC7180 in dt bindings. > Added generic QUSB2 V2 PHY support and using the same SC7180 and SDM845. > > Changes in v5: > *Added the dt bindings which are applicable only to QUSB2 V2 PHY in > separate block as per comments from Matthias in patch 1/9 and patch 4/9 > and addressed Rob's comment in patch 1/9. > *Separated the patch for new override params and added a local variable > to access overrides as per comments from Matthias patch 5/9 and 6/9. > > Changes in v4: > *Addressed Rob Herrings comments in dt bindings. > *Added new structure for all the overriding tuning params. > *Removed the sc7180 and sdm845 compatible from driver and added qusb2 v2 phy. > *Added the qusb2 v2 phy compatible in device tree for sc7180 and sdm845. > > Changes in v3: > *Using the generic phy cfg table for QUSB2 V2 phy. > *Added support for overriding tuning parameters in QUSB2 V2 PHY > from device tree. > > Changes in v2: > Sorted the compatible in driver. > Converted dt binding to yaml. > Added compatible in yaml. > > Sandeep Maheswaram (9): > dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml > dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and > SC7180 > phy: qcom-qusb2: Add generic QUSB2 V2 PHY support > dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning > parameters > phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 > V2 PHY > phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY merged the above patches to phy -next. Thanks Kishon > arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatible > arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatible > arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP > device > > .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 187 +++++++++++++++++++++ > .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 68 -------- > arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 +- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +- > drivers/phy/qualcomm/phy-qcom-qusb2.c | 144 +++++++++++----- > 6 files changed, 297 insertions(+), 114 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt >
