Thanks Andreas and Mani for your time reviewing it. Changes since v2: (Suggested by Andreas Färber) - Sort the entries alphabetically on vendor-prefixes.yaml - Improve commit description - Add Edgar Bernardi Righi and Igor Ruschi from Caninos team as CC Changes since v1: (Suggested by Manivannan Sadhasivam) - Sort the entries alphabetically on Makefile - Add title comment to the base board dts - Remove the dt-bindings/leds/common.h (garbage from tests, sorry about that) - Split the vendor-prefix and documentation in two patches Caninos Loucos Labrador is a Brazilian project of open System on Modules and Base Boards based on Lemaker Guitar. Is an initiative of LSI-TEC a non-profit organization. The Labrador CoM v2 is based on Actions Semi S500 processor with 16GB eMMC and 2GB RAM. This series adds the initial work for device tree files and also adds the vendor-prefix for the Caninos program. The work was based on the Andreas Färber device trees for Lemaker Guitar, thanks Andreas. Tested on my Caninos Labrador v2, only earlycon serial output is available for now, using the fake clock. I have already worked on something here to add the clocks and pinctrl nodes to owl-s500.dtsi, but I would like to first add the initial device tree files and then work on the other patches calmly. Stay safe, Matheus Castello Matheus Castello (3): dt-bindings: Add vendor prefix for Caninos Loucos dt-bindings: arm: actions: Document Caninos Loucos Labrador ARM: dts: Add Caninos Loucos Labrador .../devicetree/bindings/arm/actions.yaml | 5 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/owl-s500-labrador-bb.dts | 34 +++++++++++++++++++ arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 ++++++++++++ 5 files changed, 63 insertions(+) create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi -- 2.25.0
