Re: [PATCH RESEND v6 2/7] mfd: rn5t618: add IRQ support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 13 Mar 2020, Andreas Kemnade wrote:

> This adds support for IRQ handling in the RC5T619 which is required
> for properly implementing subdevices like RTC.
> For now only definitions for the variant RC5T619 are included.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
> Changes in v5:
> rn5t618_irq_init static
> 
> Changes in v4:
> merge rn5t618-irq.c into rn5t618.c
> use macros for IRQ table
> 
> Changes in v3:
> alignment cleanup
> 
> Changes in v2:
> - no dead code, did some more testing and thinking for that
> - remove extra empty lines
>  drivers/mfd/Kconfig         |  1 +
>  drivers/mfd/rn5t618.c       | 88 +++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/rn5t618.h | 15 +++++++
>  3 files changed, 104 insertions(+)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2b203290e7b9..a7067888a41e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1058,6 +1058,7 @@ config MFD_RN5T618
>  	depends on OF
>  	select MFD_CORE
>  	select REGMAP_I2C
> +	select REGMAP_IRQ
>  	help
>  	  Say yes here to add support for the Ricoh RN5T567,
>  	  RN5T618, RC5T619 PMIC.
> diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
> index ead2e79036a9..849a33d64860 100644
> --- a/drivers/mfd/rn5t618.c
> +++ b/drivers/mfd/rn5t618.c
> @@ -8,6 +8,8 @@
>  
>  #include <linux/delay.h>
>  #include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
>  #include <linux/mfd/core.h>
>  #include <linux/mfd/rn5t618.h>
>  #include <linux/module.h>
> @@ -46,9 +48,63 @@ static const struct regmap_config rn5t618_regmap_config = {
>  	.cache_type	= REGCACHE_RBTREE,
>  };
>  
> +static const struct regmap_irq rc5t619_irqs[] = {
> +	REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
> +	REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
> +	REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
> +	REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
> +	REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
> +	REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
> +};
> +
> +static const struct regmap_irq_chip rc5t619_irq_chip = {
> +	.name = "rc5t619",
> +	.irqs = rc5t619_irqs,
> +	.num_irqs = ARRAY_SIZE(rc5t619_irqs),
> +	.num_regs = 1,
> +	.status_base = RN5T618_INTMON,
> +	.mask_base = RN5T618_INTEN,
> +	.mask_invert = true,
> +};
> +
>  static struct rn5t618 *rn5t618_pm_power_off;
>  static struct notifier_block rn5t618_restart_handler;
>  
> +static int rn5t618_irq_init(struct rn5t618 *rn5t618)
> +{
> +	const struct regmap_irq_chip *irq_chip;
> +	int ret;
> +
> +	if (!rn5t618->irq)
> +		return 0;
> +
> +	switch (rn5t618->variant) {
> +	case RC5T619:
> +		irq_chip = &rc5t619_irq_chip;
> +		break;
> +	default:
> +		irq_chip = NULL;

If you initialised this at the top, you can rid this line.

Don't you want to put a message in here about an unsupported device?

> +		break;
> +	}
> +
> +	if (!irq_chip) {
> +		dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
> +			(int)rn5t618->variant);
> +		return -ENOENT;
> +	}

Ah yes.  Put this in 'default' instead.

> +	ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
> +				       rn5t618->irq,
> +				       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +				       0, irq_chip, &rn5t618->irq_data);
> +	if (ret) {
> +		dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
> +		return ret;

Make this a one line if.

> +	}
> +
> +	return 0;

... and return ret.

> +}
> +
>  static void rn5t618_trigger_poweroff_sequence(bool repower)
>  {
>  	/* disable automatic repower-on */
> @@ -106,6 +162,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
>  
>  	i2c_set_clientdata(i2c, priv);
>  	priv->variant = (long)of_id->data;
> +	priv->irq = i2c->irq;
> +	priv->dev = &i2c->dev;
>  
>  	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
>  	if (IS_ERR(priv->regmap)) {
> @@ -138,6 +196,11 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
>  		return ret;
>  	}
>  
> +	if (priv->irq > 0) {

There are already have checks in rn5t618_irq_init().

Just call it regardless.

> +		if (rn5t618_irq_init(priv))

If this returns an error, you should return that error from .probe().

> +			priv->irq = 0;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -155,15 +218,40 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
>  	return 0;
>  }
>  
> +static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
> +{
> +	struct rn5t618 *priv = dev_get_drvdata(dev);
> +
> +	if (priv->irq)
> +		disable_irq(priv->irq);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
> +{
> +	struct rn5t618 *priv = dev_get_drvdata(dev);
> +
> +	if (priv->irq)
> +		enable_irq(priv->irq);
> +
> +	return 0;
> +}
> +
>  static const struct i2c_device_id rn5t618_i2c_id[] = {
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
>  
> +static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
> +			rn5t618_i2c_suspend,
> +			rn5t618_i2c_resume);
> +
>  static struct i2c_driver rn5t618_i2c_driver = {
>  	.driver = {
>  		.name = "rn5t618",
>  		.of_match_table = of_match_ptr(rn5t618_of_match),
> +		.pm = &rn5t618_i2c_dev_pm_ops,
>  	},
>  	.probe = rn5t618_i2c_probe,
>  	.remove = rn5t618_i2c_remove,
> diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
> index d62ef48060b5..739571656f2b 100644
> --- a/include/linux/mfd/rn5t618.h
> +++ b/include/linux/mfd/rn5t618.h
> @@ -242,9 +242,24 @@ enum {
>  	RC5T619,
>  };
>  
> +/* RN5T618 IRQ definitions */
> +enum {
> +	RN5T618_IRQ_SYS = 0,
> +	RN5T618_IRQ_DCDC,
> +	RN5T618_IRQ_RTC,
> +	RN5T618_IRQ_ADC,
> +	RN5T618_IRQ_GPIO,
> +	RN5T618_IRQ_CHG,
> +	RN5T618_NR_IRQS,
> +};
> +
>  struct rn5t618 {
>  	struct regmap *regmap;
> +	struct device *dev;
>  	long variant;
> +
> +	int irq;
> +	struct regmap_irq_chip_data *irq_data;
>  };
>  
>  #endif /* __LINUX_MFD_RN5T618_H */

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux