Hi, This series adds support for the analog audio setup on the j721e EVM. The audio setup of the EVM is: Common Processor Board (CPB): McASP10 <-> pcm3168a Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a Both CPB and IVI wired in parallel serializer setup. The first patch adds the stream_name for McASP driver as it is needed in multicodec (and would be needed in DPCM) setup for proper DAPM handling. The second patch adds two DT schema, one for the cpb and one for the cpb+ivi card. Regards, Peter --- Peter Ujfalusi (3): ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture bindings: sound: Add documentation for TI j721e EVM (CPB and IVI) ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI) .../bindings/sound/ti,j721e-cpb-audio.yaml | 93 ++ .../sound/ti,j721e-cpb-ivi-audio.yaml | 145 +++ sound/soc/ti/Kconfig | 8 + sound/soc/ti/Makefile | 2 + sound/soc/ti/davinci-mcasp.c | 3 + sound/soc/ti/j721e-evm.c | 864 ++++++++++++++++++ 6 files changed, 1115 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml create mode 100644 sound/soc/ti/j721e-evm.c -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
