Re: [PATCH v11 1/5] dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sam,

On Wed, 2020-03-18 at 12:26:51 -0700, Sam Ravnborg wrote:
> On Wed, Mar 18, 2020 at 05:37:24PM +0200, Laurent Pinchart wrote:
> > From: Hyun Kwon <hyun.kwon@xxxxxxxxxx>
> > 
> > The bindings describe the ZynqMP DP subsystem. They don't support the
> > interface with the programmable logic (FPGA) or audio yet.
> > 
> > Signed-off-by: Hyun Kwon <hyun.kwon@xxxxxxxxxx>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> 
> Bikeshedding - examples with indent on 4 spaces to make them easier to
> read.
> 
> Would it be possible to make this binding: (GPL-2.0-only OR BSD-2-Clause)
> This is preferred for new bindings.
> In this case asking Hyun Kwon should be enough?

It should be possible. But to be safer and if needed, I need to check with
corperate policy before I can confirm.

Michal, have you already checked about adding 'OR BSD-2-Clause'? or should I
take it up to Xilinx legal?

Thanks,
-hyun

> 
> With or without the suggestions above:
> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> 
> 	Sam
> 
> > ---
> > Changes since v10:
> > 
> > - Update example to new PHY DT bindings without subnodes
> > - Add resets property
> > 
> > Changes since v9:
> > 
> > - Fix constraints on clock-names
> > - Document dp_apb_clk as the APB clock, not the AXI clock
> > 
> > Changes since v8:
> > 
> > - Convert to yaml
> > - Rename aclk to dp_apb_clk
> > ---
> >  .../display/xlnx/xlnx,zynqmp-dpsub.yaml       | 174 ++++++++++++++++++
> >  1 file changed, 174 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
> > new file mode 100644
> > index 000000000000..05e6a14de75c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
> > @@ -0,0 +1,174 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx ZynqMP DisplayPort Subsystem
> > +
> > +description: |
> > +  The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
> > +  implements the display and audio pipelines based on the DisplayPort v1.2
> > +  standard. The subsystem includes multiple functional blocks as below:
> > +
> > +               +------------------------------------------------------------+
> > +  +--------+   | +----------------+     +-----------+                       |
> > +  | DPDMA  | --->|                | --> |   Video   | Video +-------------+ |
> > +  | 4x vid |   | |                |     | Rendering | -+--> |             | |   +------+
> > +  | 2x aud |   | |  Audio/Video   | --> | Pipeline  |  |    | DisplayPort |---> | PHY0 |
> > +  +--------+   | | Buffer Manager |     +-----------+  |    |   Source    | |   +------+
> > +               | |    and STC     |     +-----------+  |    | Controller  | |   +------+
> > +  Live Video --->|                | --> |   Audio   | Audio |             |---> | PHY1 |
> > +               | |                |     |   Mixer   | --+-> |             | |   +------+
> > +  Live Audio --->|                | --> |           |  ||   +-------------+ |
> > +               | +----------------+     +-----------+  ||                   |
> > +               +---------------------------------------||-------------------+
> > +                                                       vv
> > +                                                 Blended Video and
> > +                                                 Mixed Audio to PL
> > +
> > +  The Buffer Manager interacts with external interface such as DMA engines or
> > +  live audio/video streams from the programmable logic. The Video Rendering
> > +  Pipeline blends the video and graphics layers and performs colorspace
> > +  conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
> > +  Source Controller handles the DisplayPort protocol and connects to external
> > +  PHYs.
> > +
> > +  The subsystem supports 2 video and 2 audio streams, and various pixel formats
> > +  and depths up to 4K@30 resolution.
> > +
> > +  Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
> > +  (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
> > +  for more details.
> > +
> > +maintainers:
> > +  - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    const: xlnx,zynqmp-dpsub-1.7
> > +
> > +  reg:
> > +    maxItems: 4
> > +  reg-names:
> > +    items:
> > +      - const: dp
> > +      - const: blend
> > +      - const: av_buf
> > +      - const: aud
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    description:
> > +      The APB clock and at least one video clock are mandatory, the audio clock
> > +      is optional.
> > +    minItems: 2
> > +    maxItems: 4
> > +    items:
> > +      - description: dp_apb_clk is the APB clock
> > +      - description: dp_aud_clk is the Audio clock
> > +      - description:
> > +          dp_vtc_pixel_clk_in is the non-live video clock (from Processing
> > +          System)
> > +      - description:
> > +          dp_live_video_in_clk is the live video clock (from Programmable
> > +          Logic)
> > +  clock-names:
> > +    oneOf:
> > +      - minItems: 2
> > +        maxItems: 3
> > +        items:
> > +          - const: dp_apb_clk
> > +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> > +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> > +      - minItems: 3
> > +        maxItems: 4
> > +        items:
> > +          - const: dp_apb_clk
> > +          - const: dp_aud_clk
> > +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> > +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  dmas:
> > +    maxItems: 4
> > +    items:
> > +      - description: Video layer, plane 0 (RGB or luma)
> > +      - description: Video layer, plane 1 (U/V or U)
> > +      - description: Video layer, plane 2 (V)
> > +      - description: Graphics layer
> > +  dma-names:
> > +    items:
> > +      - const: vid0
> > +      - const: vid1
> > +      - const: vid2
> > +      - const: gfx0
> > +
> > +  phys:
> > +    description: PHYs for the DP data lanes
> > +    minItems: 1
> > +    maxItems: 2
> > +  phy-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - const: dp-phy0
> > +      - const: dp-phy1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - dmas
> > +  - dma-names
> > +  - phys
> > +  - phy-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/phy/phy.h>
> > +    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
> > +
> > +    display@fd4a0000 {
> > +      compatible = "xlnx,zynqmp-dpsub-1.7";
> > +      reg = <0x0 0xfd4a0000 0x0 0x1000>,
> > +            <0x0 0xfd4aa000 0x0 0x1000>,
> > +            <0x0 0xfd4ab000 0x0 0x1000>,
> > +            <0x0 0xfd4ac000 0x0 0x1000>;
> > +      reg-names = "dp", "blend", "av_buf", "aud";
> > +      interrupts = <0 119 4>;
> > +      interrupt-parent = <&gic>;
> > +
> > +      clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
> > +      clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
> > +
> > +      power-domains = <&pd_dp>;
> > +      resets = <&reset ZYNQMP_RESET_DP>;
> > +
> > +      dma-names = "vid0", "vid1", "vid2", "gfx0";
> > +      dmas = <&xlnx_dpdma 0>,
> > +             <&xlnx_dpdma 1>,
> > +             <&xlnx_dpdma 2>,
> > +             <&xlnx_dpdma 3>;
> > +
> > +      phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>,
> > +             <&psgtr 0 PHY_TYPE_DP 1 3 27000000>;
> > +
> > +      phy-names = "dp-phy0", "dp-phy1";
> > +    };
> > +
> > +...
> > -- 
> > Regards,
> > 
> > Laurent Pinchart
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux