On Wed, Mar 18, 2020 at 04:09:07PM +0100, Guido Günther wrote: > The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs. > > Signed-off-by: Guido Günther <agx@xxxxxxxxxxx> > Tested-by: Robert Chiras <robert.chiras@xxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > --- > .../bindings/display/bridge/nwl-dsi.yaml | 216 ++++++++++++++++++ > 1 file changed, 216 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml > new file mode 100644 > index 000000000000..ec1e7e12719d > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml > @@ -0,0 +1,216 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Northwest Logic MIPI-DSI controller on i.MX SoCs > + > +maintainers: > + - Guido Gúnther <agx@xxxxxxxxxxx> > + - Robert Chiras <robert.chiras@xxxxxxx> > + > +description: | > + NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for > + the SOCs NWL MIPI-DSI host controller. > + > +properties: > + compatible: > + const: fsl,imx8mq-nwl-dsi > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + clocks: > + items: > + - description: DSI core clock > + - description: RX_ESC clock (used in escape mode) > + - description: TX_ESC clock (used in escape mode) > + - description: PHY_REF clock > + - description: LCDIF clock > + > + clock-names: > + items: > + - const: core > + - const: rx_esc > + - const: tx_esc > + - const: phy_ref > + - const: lcdif > + > + mux-controls: > + description: > + mux controller node to use for operating the input mux > + > + phys: > + maxItems: 1 > + description: > + A phandle to the phy module representing the DPHY > + > + phy-names: > + items: > + - const: dphy > + > + power-domains: > + maxItems: 1 > + > + resets: > + items: > + - description: dsi byte reset line > + - description: dsi dpi reset line > + - description: dsi esc reset line > + - description: dsi pclk reset line > + > + reset-names: > + items: > + - const: byte > + - const: dpi > + - const: esc > + - const: pclk > + > + ports: > + type: object > + description: > + A node containing DSI input & output port nodes with endpoint > + definitions as documented in > + Documentation/devicetree/bindings/graph.txt. > + properties: > + port@0: > + type: object > + description: > + Input port node to receive pixel data from the > + display controller. Exactly one endpoint must be > + specified. > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + endpoint@0: > + description: sub-node describing the input from LCDIF > + type: object > + > + endpoint@1: > + description: sub-node describing the input from DCSS > + type: object > + > + reg: > + const: 0 > + > + required: > + - '#address-cells' > + - '#size-cells' > + - reg > + additionalProperties: false > + > + port@1: > + type: object > + description: > + DSI output port node to the panel or the next bridge > + in the chain > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + required: > + - '#address-cells' > + - '#size-cells' > + - port@0 > + - port@1 > + > + additionalProperties: false > + > +patternProperties: > + "^panel@[0-9]+$": > + type: object > + > +required: > + - '#address-cells' > + - '#size-cells' > + - clock-names > + - clocks > + - compatible > + - interrupts > + - mux-controls > + - phy-names > + - phys > + - ports > + - reg > + - reset-names > + - resets > + > +additionalProperties: false > + > +examples: > + - | > + > + #include <dt-bindings/clock/imx8mq-clock.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/reset/imx8mq-reset.h> > + > + mipi_dsi: mipi_dsi@30a00000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx8mq-nwl-dsi"; > + reg = <0x30A00000 0x300>; > + clocks = <&clk IMX8MQ_CLK_DSI_CORE>, > + <&clk IMX8MQ_CLK_DSI_AHB>, > + <&clk IMX8MQ_CLK_DSI_IPG_DIV>, > + <&clk IMX8MQ_CLK_DSI_PHY_REF>, > + <&clk IMX8MQ_CLK_LCDIF_PIXEL>; > + clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif"; > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + mux-controls = <&mux 0>; > + power-domains = <&pgc_mipi>; > + resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>, > + <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>, > + <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>, > + <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>; > + reset-names = "byte", "dpi", "esc", "pclk"; > + phys = <&dphy>; > + phy-names = "dphy"; > + > + panel@0 { > + compatible = "rocktech,jh057n00900"; > + reg = <0>; > + port@0 { > + panel_in: endpoint { > + remote-endpoint = <&mipi_dsi_out>; > + }; > + }; > + }; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #size-cells = <0>; > + #address-cells = <1>; > + reg = <0>; > + mipi_dsi_in: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&lcdif_mipi_dsi>; > + }; > + }; > + port@1 { > + reg = <1>; > + mipi_dsi_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > -- > 2.23.0
