On 3/18/20 4:48 AM, Hans Verkuil wrote:
External email: Use caution opening links or attachments
On 2/24/20 5:45 AM, Sowjanya Komatineni wrote:
On 2/20/20 11:11 AM, Sowjanya Komatineni wrote:
On 2/20/20 5:33 AM, Hans Verkuil wrote:
External email: Use caution opening links or attachments
(Replying to myself so I can explain this a bit more)
On 2/20/20 1:44 PM, Hans Verkuil wrote:
+
+static int tegra_csi_tpg_channels_alloc(struct tegra_csi *csi)
+{
+ struct device_node *node = csi->dev->of_node;
+ unsigned int port_num;
+ int ret;
+ struct tegra_csi_channel *item;
+ unsigned int tpg_channels = csi->soc->csi_max_channels;
+
+ /* allocate CSI channel for each CSI x2 ports */
+ for (port_num = 0; port_num < tpg_channels; port_num++) {
+ item = devm_kzalloc(csi->dev, sizeof(*item), GFP_KERNEL);
Using devm_*alloc can be dangerous. If someone unbinds the driver, then
all memory allocated with devm_ is immediately freed. But if an
application
still has a filehandle open, then when it closes it it might still
reference
this already-freed memory.
I recommend that you avoid using devm_*alloc for media drivers.
A good test is to unbind & bind the driver:
cd /sys/devices/platform/50000000.host1x/54080000.vi/driver
echo -n 54080000.vi >unbind
echo -n 54080000.vi >bind
First just do this without the driver being used. That already
gives me 'list_del corruption' kernel messages (list debugging
is turned on in my kernel).
Will fix in v4 to use kzalloc and also proper release v4l2 to make sure
unbind/bind works properly.
BTW, tegra vi and csi are registered as clients to host1x video driver.
So, unbind and bind should be done with host1x video driver "tegra-video"
cd /sys/devices/platform/50000000.host1x/tegra-video/driver
echo -n tegra-video > unbind
echo -n tegra-video > bind
This still crashes with v4, at least if I am streaming with v4l2-ctl --stream-mmap.
Is that known?
It's not a big deal at this moment, just want to know if this will be looked
at later.
Regards,
Hans
Weird, I tested streaming after unbind and bind as well and don't see
crash. Did below steps and tried several times unbind/bind as well.
./v4l2-ctl --stream-mmap --stream-count=1 -d /dev/video3
cd /sys/devices/platform/50000000.host1x/tegra-video/driver
echo -n tegra-video > unbind
sleep 1
echo -n tegra-video > bind
cd /home/ubuntu
./v4l2-ctl --stream-mmap --stream-count=1 -d /dev/video3
Can you post call trace when you saw crash?
Note that this first test is basically identical to a rmmod/modprobe
of the driver. But when I compiled the driver as a module it didn't
create any video device nodes! Nor did I see any errors in the kernel
log. I didn't pursue this, and perhaps I did something wrong, but it's
worth taking a look at.
The next step would be to have a video node open with:
v4l2-ctl --sleep 10
then while it is sleeping unbind the driver and see what happens
when v4l2-ctl exits.
Worst case is when you are streaming:
v4l2-ctl --stream-mmap
and then unbind.
In general, the best way to get this to work correctly is:
1) don't use devm_*alloc
2) set the release callback of struct v4l2_device and do all freeing
there.
3) in the platform remove() callback you call media_device_unregister()
and video_unregister_device().
Reg 3, in current patch, media_device_unregister is called in
host1x_video_remove
video_unregister_device happens during host1x_video_remove ->
host1x_device_exit -> tegra_vi_exit -> tegra_vi_channels_cleanup
It's worth getting this right in this early stage, rather than fixing it
in the future.
Regards,
Hans
