[PATCH v5 11/12] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vladimir Oltean <vladimir.oltean@xxxxxxx>

LS1028A has a functional connection to the eDMA module. Even if the
spi-fsl-dspi.c driver is not using DMA for LS1028A now, define the slots
in the DMAMUX for connecting the eDMA channels to the 3 DSPI
controllers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
Changes in v5:
None.

Changes in v4:
None.

Changes in v3:
None.

Changes in v2:
None.

 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 515e0a1b934f..18155273a46e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -298,6 +298,8 @@
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 0 62>, <&edma0 0 60>;
+			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
 			little-endian;
 			status = "disabled";
@@ -311,6 +313,8 @@
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 0 58>, <&edma0 0 56>;
+			dma-names = "tx", "rx";
 			spi-num-chipselects = <4>;
 			little-endian;
 			status = "disabled";
@@ -324,6 +328,8 @@
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 0 54>, <&edma0 0 2>;
+			dma-names = "tx", "rx";
 			spi-num-chipselects = <3>;
 			little-endian;
 			status = "disabled";
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux