Re: [PATCH V2 5/8] i2c: i2c-qcom-geni: Add interconnect support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Matthias,

On 3/14/2020 5:47 AM, Matthias Kaehlcke wrote:
Hi,

On Fri, Mar 13, 2020 at 06:42:11PM +0530, Akash Asthana wrote:
Get the interconnect paths for I2C based Serial Engine device
and vote according to the bus speed of the driver.

Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
---
Changes in V2:
  - As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get
  - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
  - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
    path handle
  - As per Matthias comment, added error handling for icc_set_bw call

  drivers/i2c/busses/i2c-qcom-geni.c | 110 +++++++++++++++++++++++++++++++++++++
  1 file changed, 110 insertions(+)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 17abf60c..33ab685 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -163,6 +163,23 @@ static void qcom_geni_i2c_conf(struct geni_i2c_dev *gi2c)
  	writel_relaxed(val, gi2c->se.base + SE_I2C_SCL_COUNTERS);
  }
+static int geni_i2c_icc_get(struct geni_se *se)
+{
+	se->icc_path_geni_to_core = devm_of_icc_get(se->dev, "qup-core");
+	if (IS_ERR(se->icc_path_geni_to_core))
+		return PTR_ERR(se->icc_path_geni_to_core);
+
+	se->icc_path_cpu_to_geni = devm_of_icc_get(se->dev, "qup-config");
+	if (IS_ERR(se->icc_path_cpu_to_geni))
+		return PTR_ERR(se->icc_path_cpu_to_geni);
+
+	se->icc_path_geni_to_ddr = devm_of_icc_get(se->dev, "qup-memory");
+	if (IS_ERR(se->icc_path_geni_to_ddr))
+		return PTR_ERR(se->icc_path_geni_to_ddr);
+
+	return 0;
+}
+
  static void geni_i2c_err_misc(struct geni_i2c_dev *gi2c)
  {
  	u32 m_cmd = readl_relaxed(gi2c->se.base + SE_GENI_M_CMD0);
@@ -563,6 +580,39 @@ static int geni_i2c_probe(struct platform_device *pdev)
  	gi2c->adap.dev.of_node = pdev->dev.of_node;
  	strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
+ ret = geni_i2c_icc_get(&gi2c->se);
+	if (ret)
+		return ret;
+	/*
+	 * Set the bus quota for core and cpu to a reasonable value for
+	 * register access.
+	 * Set quota for DDR based on bus speed, assume peak requirement
+	 * as twice of avg bw.
+	 */
+	gi2c->se.avg_bw_core = Bps_to_icc(1000);
as commented on the UART patch, you might want to consider adding a constant
for this recurring default value.

+	gi2c->se.peak_bw_core = Bps_to_icc(CORE_2X_100_MHZ);
+	gi2c->se.avg_bw_cpu = Bps_to_icc(1000);
+	gi2c->se.peak_bw_cpu = Bps_to_icc(1000);
+	gi2c->se.avg_bw_ddr = Bps_to_icc(gi2c->clk_freq_out);
+	gi2c->se.peak_bw_ddr = Bps_to_icc(2 * gi2c->clk_freq_out);
+
+	/* Vote for core clocks and CPU for register access */
+	ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, gi2c->se.avg_bw_core,
+				gi2c->se.peak_bw_core);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: ICC BW voting failed for core\n",
+			__func__);
+		return ret;
+	}
+
+	ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, gi2c->se.avg_bw_cpu,
+				gi2c->se.peak_bw_cpu);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: ICC BW voting failed for cpu\n",
+			__func__);
+		return ret;
+	}
+
  	ret = geni_se_resources_on(&gi2c->se);
  	if (ret) {
  		dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
@@ -584,6 +634,19 @@ static int geni_i2c_probe(struct platform_device *pdev)
  		dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
  		return ret;
  	}
+	/* Remove vote from core clocks and CPU */
+	ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, 0, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: ICC BW remove failed for core\n",
+			__func__);
+		return ret;
+	}
+
+	ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, 0, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: ICC BW remove failed for cpu\n",
+			__func__);
Should this return an error as for the core clocks?

+	}
dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth); @@ -629,6 +692,28 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
  		gi2c->suspended = 1;
  	}
+ /* Remove BW votes */
+	ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, 0, 0);
+	if (ret) {
+		dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for core\n",
+			__func__);
+		return ret;
+	}
+
+	ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, 0, 0);
+	if (ret) {
+		dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for cpu\n",
+			__func__);
+		return ret;
+	}
+
+	ret = icc_set_bw(gi2c->se.icc_path_geni_to_ddr, 0, 0);
+	if (ret) {
+		dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for ddr\n",
+			__func__);
+		return ret;
+	}
you could consider putting this and the ICC voting in _runtime_resume() in
separate functions and call them from here and _probe(). The only difference
in _probe() is that it doesn't vote for the DDR bandwidth, but that slight
one-time overhead might be worth for consolidating the code.

Actually all this looks very similar for UART, I2C, SPI and QSPI. It seems it
should be possible to consolidate this further by having functions like these
in the geni SE driver:

int geni_icc_get(struct geni_se *se, const char *icc_core, const char *icc_cpu,
	const char *icc_ddr)
{
	if (icc_core) {
		se->icc_path_geni_to_core = devm_of_icc_get(se->dev, icc_core);
		if (IS_ERR(se->icc_path_geni_to_core))
			return PTR_ERR(se->icc_path_geni_to_core);
	}

	if (icc_cpu) {

	...
}

int geni_icc_vote_on(struct geni_se *se)
{
	if (gi2c->se.icc_path_geni_to_core) {
		ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, gi2c->se.avg_bw_core,
			gi2c->se.peak_bw_core);
		if (ret) {
			dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for core\n",
				__func__);
			return ret;
		}
	}

	/* or to reduce nesting:
	if (!gi2c->se.icc_path_geni_to_core)
		goto vote_cpu;

	ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, gi2c->se.avg_bw_core,
			gi2c->se.peak_bw_core);
	if (ret) {
	...

vote_cpu:
	*/

	if (gi2c->se.icc_path_cpu_to_geni) {

	...
}

int geni_icc_vote_off(struct geni_se *se)
{
	if (gi2c->se.icc_path_geni_to_core) {
		ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, 0, 0);
		if (ret) {
			dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW remove failed for core\n",
				__func__);
			return ret;
		}
	}

	if (gi2c->se.icc_path_cpu_to_geni) {

	...
}

optionally you could even reduce the code further by having an array of
'struct geni_icc_path' (as suggested on https://patchwork.kernel.org/patch/11436889/#23221925)
and iterate over the array instead of spelling everything out for the 3
ICC paths.
ok
+
  	return 0;
  }
@@ -637,6 +722,31 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
  	int ret;
  	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+ /* Vote on Core, CPU and DDR path respectively */
+	ret = icc_set_bw(gi2c->se.icc_path_geni_to_core, gi2c->se.avg_bw_core,
+		gi2c->se.peak_bw_core);
+	if (ret) {
+		dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for core\n",
+			__func__);
+		return ret;
+	}
+
+	ret = icc_set_bw(gi2c->se.icc_path_cpu_to_geni, gi2c->se.avg_bw_cpu,
+		gi2c->se.peak_bw_cpu);
+	if (ret) {
+		dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for cpu\n",
+			__func__);
+		return ret;
+	}
+
+	ret = icc_set_bw(gi2c->se.icc_path_geni_to_ddr, gi2c->se.avg_bw_ddr,
+		gi2c->se.peak_bw_ddr);
+	if (ret) {
+		dev_err_ratelimited(gi2c->se.dev, "%s: ICC BW voting failed for ddr\n",
+			__func__);
+		return ret;
+	}
+
as per above this would be just:

	ret = geni_icc_vote_on(&gi2c->se);
	if (ret)
		return ret;

with the same benefit for the other 3 drivers.

Yeah this would be better.

Thanks for reviewing.

regards,

Akash

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux