gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
arch/arm/boot/dts/pxa910.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index b3d6182d4de4a..5f8e208916b31 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -106,7 +106,7 @@ gpio@d4019000 {
clocks = <&soc_clocks PXA910_CLK_GPIO>;
resets = <&soc_clocks PXA910_CLK_GPIO>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
ranges;
gcb0: gpio@d4019000 {
--
2.25.1
