A straightforward conversion of the ehci-mv binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> --- .../devicetree/bindings/usb/ehci-mv.txt | 23 ------- .../bindings/usb/marvell,pxau2o-ehci.yaml | 60 +++++++++++++++++++ 2 files changed, 60 insertions(+), 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/ehci-mv.txt create mode 100644 Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt deleted file mode 100644 index 335589895763e..0000000000000 --- a/Documentation/devicetree/bindings/usb/ehci-mv.txt +++ /dev/null @@ -1,23 +0,0 @@ -* Marvell PXA/MMP EHCI controller. - -Required properties: - -- compatible: must be "marvell,pxau2o-ehci" -- reg: physical base addresses of the controller and length of memory mapped region -- interrupts: one EHCI controller interrupt should be described here -- clocks: phandle list of usb clocks -- clock-names: should be "USBCLK" -- phys: phandle for the PHY device -- phy-names: should be "usb" - -Example: - - ehci0: usb-ehci@d4208000 { - compatible = "marvell,pxau2o-ehci"; - reg = <0xd4208000 0x200>; - interrupts = <44>; - clocks = <&soc_clocks MMP2_CLK_USB>; - clock-names = "USBCLK"; - phys = <&usb_otg_phy>; - phy-names = "usb"; - }; diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml new file mode 100644 index 0000000000000..189025ef1e92e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA/MMP EHCI bindings + +maintainers: + - Lubomir Rintel <lkundrak@xxxxx> + +allOf: + - $ref: usb-hcd.yaml# + +properties: + compatible: + const: marvell,pxau2o-ehci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: USBCLK + + phys: + maxItems: 1 + + phy-names: + const: usb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2.h> + usb@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <44>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy>; + phy-names = "usb"; + }; + +... -- 2.25.1