RE: [PATCH v5 2/7] PCI: rcar: Move shareable code to a common file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Yoshihiro-san,

Thank you for the review.

> -----Original Message-----
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Sent: 17 March 2020 07:23
> To: Lad Prabhakar <prabhakar.csengg@xxxxxxxxx>
> Cc: Andrew Murray <andrew.murray@xxxxxxx>; linux-pci@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-renesas-soc@xxxxxxxxxxxxxxx;
> linux-rockchip@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; Prabhakar Mahadev Lad <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>; Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Rob
> Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>;
> Catalin Marinas <catalin.marinas@xxxxxxx>; Will Deacon <will@xxxxxxxxxx>;
> Kishon Vijay Abraham I <kishon@xxxxxx>; Lorenzo Pieralisi
> <lorenzo.pieralisi@xxxxxxx>; Arnd Bergmann <arnd@xxxxxxxx>; Greg
> Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Jingoo Han
> <jingoohan1@xxxxxxxxx>; Gustavo Pimentel
> <gustavo.pimentel@xxxxxxxxxxxx>; Marek Vasut
> <marek.vasut+renesas@xxxxxxxxx>; Shawn Lin <shawn.lin@rock-
> chips.com>; Heiko Stuebner <heiko@xxxxxxxxx>
> Subject: RE: [PATCH v5 2/7] PCI: rcar: Move shareable code to a common file
>
> Hi Prabhakar-san,
>
> Thank you for the patch!
>
> > From: Lad Prabhakar, Sent: Saturday, February 29, 2020 12:41 AM
> >
> > This patch moves sharable code to common file pcie-rcar.c and the
> > #defines to pcie-rcar.h so that the common code can be reused with
> endpoint driver.
> > There are no functional changes with this patch for the host
> > controller driver.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/Makefile         |   2 +-
> >  drivers/pci/controller/pcie-rcar-host.c | 358 ++++++++------------------------
> >  drivers/pci/controller/pcie-rcar.c      | 117 +++++++++++
> >  drivers/pci/controller/pcie-rcar.h      | 125 +++++++++++
> >  4 files changed, 324 insertions(+), 278 deletions(-)  create mode
> > 100644 drivers/pci/controller/pcie-rcar.c
> >  create mode 100644 drivers/pci/controller/pcie-rcar.h
> >
> > diff --git a/drivers/pci/controller/Makefile
> > b/drivers/pci/controller/Makefile index 4ca2da6..b4ada32 100644
> > --- a/drivers/pci/controller/Makefile
> > +++ b/drivers/pci/controller/Makefile
> > @@ -7,7 +7,7 @@ obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
> >  obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
> >  obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
> >  obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> > -obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar-host.o
> > +obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
> >  obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
> >  obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> >  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o diff --git
> > a/drivers/pci/controller/pcie-rcar-host.c
> > b/drivers/pci/controller/pcie-rcar-host.c
> > index 759c654..93f22d8 100644
> > --- a/drivers/pci/controller/pcie-rcar-host.c
> > +++ b/drivers/pci/controller/pcie-rcar-host.c
> > @@ -1,7 +1,7 @@
> >  // SPDX-License-Identifier: GPL-2.0
> >  /*
> >   * PCIe driver for Renesas R-Car SoCs
> > - *  Copyright (C) 2014 Renesas Electronics Europe Ltd
> > + *  Copyright (C) 2014-2020 Renesas Electronics Europe Ltd
> >   *
> >   * Based on:
> >   *  arch/sh/drivers/pci/pcie-sh7786.c @@ -30,104 +30,7 @@  #include
> > <linux/pm_runtime.h>  #include <linux/slab.h>
> >
> > -#define PCIECAR0x000010
> > -#define PCIECCTLR0x000018
> > -#define  CONFIG_SEND_ENABLEBIT(31)
> > -#define  TYPE0(0 << 8)
> > -#define  TYPE1BIT(8)
> > -#define PCIECDR0x000020
> > -#define PCIEMSR0x000028
> > -#define PCIEINTXR0x000400
> > -#define PCIEPHYSR0x0007f0
> > -#define  PHYRDYBIT(0)
> > -#define PCIEMSITXR0x000840
> > -
> > -/* Transfer control */
> > -#define PCIETCTLR0x02000
> > -#define  DL_DOWNBIT(3)
> > -#define  CFINITBIT(0)
> > -#define PCIETSTR0x02004
> > -#define  DATA_LINK_ACTIVEBIT(0)
> > -#define PCIEERRFR0x02020
> > -#define  UNSUPPORTED_REQUESTBIT(4)
> > -#define PCIEMSIFR0x02044
> > -#define PCIEMSIALR0x02048
> > -#define  MSIFEBIT(0)
> > -#define PCIEMSIAUR0x0204c
> > -#define PCIEMSIIER0x02050
> > -
> > -/* root port address */
> > -#define PCIEPRAR(x)(0x02080 + ((x) * 0x4))
> > -
> > -/* local address reg & mask */
> > -#define PCIELAR(x)(0x02200 + ((x) * 0x20))
> > -#define PCIELAMR(x)(0x02208 + ((x) * 0x20))
> > -#define  LAM_PREFETCHBIT(3)
> > -#define  LAM_64BITBIT(2)
> > -#define  LAR_ENABLEBIT(1)
> > -
> > -/* PCIe address reg & mask */
> > -#define PCIEPALR(x)(0x03400 + ((x) * 0x20))
> > -#define PCIEPAUR(x)(0x03404 + ((x) * 0x20))
> > -#define PCIEPAMR(x)(0x03408 + ((x) * 0x20))
> > -#define PCIEPTCTLR(x)(0x0340c + ((x) * 0x20))
> > -#define  PAR_ENABLEBIT(31)
> > -#define  IO_SPACEBIT(8)
> > -
> > -/* Configuration */
> > -#define PCICONF(x)(0x010000 + ((x) * 0x4))
> > -#define PMCAP(x)(0x010040 + ((x) * 0x4))
> > -#define EXPCAP(x)(0x010070 + ((x) * 0x4))
> > -#define VCCAP(x)(0x010100 + ((x) * 0x4))
> > -
> > -/* link layer */
> > -#define IDSETR10x011004
> > -#define TLCTLR0x011048
> > -#define MACSR0x011054
> > -#define  SPCHGFINBIT(4)
> > -#define  SPCHGFAILBIT(6)
> > -#define  SPCHGSUCBIT(7)
> > -#define  LINK_SPEED(0xf << 16)
> > -#define  LINK_SPEED_2_5GTS(1 << 16)
> > -#define  LINK_SPEED_5_0GTS(2 << 16)
> > -#define MACCTLR0x011058
> > -#define  MACCTLR_NFTS_MASKGENMASK(23, 16)/* The name
> is from SH7786 */
> > -#define  SPEED_CHANGEBIT(24)
> > -#define  SCRAMBLE_DISABLEBIT(27)
> > -#define  LTSMDISBIT(31)
> > -#define  MACCTLR_INIT_VAL(LTSMDIS | MACCTLR_NFTS_MASK)
> > -#define PMSR0x01105c
> > -#define MACS2R0x011078
> > -#define MACCGSPSETR0x011084
> > -#define  SPCNGRSNBIT(31)
> > -
> > -/* R-Car H1 PHY */
> > -#define H1_PCIEPHYADRR0x04000c
> > -#define  WRITE_CMDBIT(16)
> > -#define  PHY_ACKBIT(24)
> > -#define  RATE_POS12
> > -#define  LANE_POS8
> > -#define  ADR_POS0
> > -#define H1_PCIEPHYDOUTR0x040014
> > -
> > -/* R-Car Gen2 PHY */
> > -#define GEN2_PCIEPHYADDR0x780
> > -#define GEN2_PCIEPHYDATA0x784
> > -#define GEN2_PCIEPHYCTRL0x78c
> > -
> > -#define INT_PCI_MSI_NR32
> > -
> > -#define RCONF(x)(PCICONF(0) + (x))
> > -#define RPMCAP(x)(PMCAP(0) + (x))
> > -#define REXPCAP(x)(EXPCAP(0) + (x))
> > -#define RVCCAP(x)(VCCAP(0) + (x))
> > -
> > -#define PCIE_CONF_BUS(b)(((b) & 0xff) << 24)
> > -#define PCIE_CONF_DEV(d)(((d) & 0x1f) << 19)
> > -#define PCIE_CONF_FUNC(f)(((f) & 0x7) << 16)
> > -
> > -#define RCAR_PCI_MAX_RESOURCES4
> > -#define MAX_NR_INBOUND_MAPS6
> > +#include "pcie-rcar.h"
> >
> >  struct rcar_msi {
> >  DECLARE_BITMAP(used, INT_PCI_MSI_NR); @@ -155,36 +58,10 @@
> struct
> > rcar_pcie {
> >  structrcar_msi msi;
> >  };
> >
> > -static void rcar_pci_write_reg(struct rcar_pcie *pcie, u32 val,
> > -       unsigned int reg)
> > -{
> > -writel(val, pcie->base + reg);
> > -}
> > -
> > -static u32 rcar_pci_read_reg(struct rcar_pcie *pcie, unsigned int
> > reg) -{
> > -return readl(pcie->base + reg);
> > -}
> > -
> > -enum {
> > -RCAR_PCI_ACCESS_READ,
> > -RCAR_PCI_ACCESS_WRITE,
> > -};
> > -
> > -static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask,
> > u32 data) -{
> > -unsigned int shift = BITS_PER_BYTE * (where & 3);
> > -u32 val = rcar_pci_read_reg(pcie, where & ~3);
> > -
> > -val &= ~(mask << shift);
> > -val |= data << shift;
> > -rcar_pci_write_reg(pcie, val, where & ~3);
> > -}
> > -
> >  static u32 rcar_read_conf(struct rcar_pcie *pcie, int where)  {
> >  unsigned int shift = BITS_PER_BYTE * (where & 3);
> > -u32 val = rcar_pci_read_reg(pcie, where & ~3);
> > +u32 val = rcar_pci_read_reg(pcie->base, where & ~3);
>
> I'd like to avoid these many changes about "pcie" to "pcie->base" somehow.
> My idea is moving declaration of struct rcar_pcie to rcar-pcie.h and use it
> from both host and ep codes. According to the patch 6/7, the rcar-pcie-ep.c
> also has the same name of struct rcar_pcie and this has the same "base" and
> "dev.
> So, common rcar_pcie should have these members. Remaining members are
> contained on renamed structures like "rcar_pcie_host" and "rcar_pcie_ep".
> And then, the rcar_pcie_{host,ep} have struct rcar_pcie pcie member.
>
Agreed will do that.

Cheers,
--Prabhakar

> Best regards,
> Yoshihiro Shimoda
>
> >  return val >> shift;
> >  }
> > @@ -221,13 +98,13 @@ static int rcar_pcie_config_access(struct rcar_pcie
> *pcie,
> >  return PCIBIOS_DEVICE_NOT_FOUND;
> >
> >  if (access_type == RCAR_PCI_ACCESS_READ) {
> > -*data = rcar_pci_read_reg(pcie, PCICONF(index));
> > +*data = rcar_pci_read_reg(pcie->base,
> PCICONF(index));
> >  } else {
> >  /* Keep an eye out for changes to the root bus
> number */
> >  if (pci_is_root_bus(bus) && (reg ==
> PCI_PRIMARY_BUS))
> >  pcie->root_bus_nr = *data & 0xff;
> >
> > -rcar_pci_write_reg(pcie, *data, PCICONF(index));
> > +rcar_pci_write_reg(pcie->base, *data,
> PCICONF(index));
> >  }
> >
> >  return PCIBIOS_SUCCESSFUL;
> > @@ -237,20 +114,23 @@ static int rcar_pcie_config_access(struct rcar_pcie
> *pcie,
> >  return PCIBIOS_DEVICE_NOT_FOUND;
> >
> >  /* Clear errors */
> > -rcar_pci_write_reg(pcie, rcar_pci_read_reg(pcie, PCIEERRFR),
> PCIEERRFR);
> > +rcar_pci_write_reg(pcie->base, rcar_pci_read_reg(pcie->base,
> PCIEERRFR),
> > +   PCIEERRFR);
> >
> >  /* Set the PIO address */
> > -rcar_pci_write_reg(pcie, PCIE_CONF_BUS(bus->number) |
> > +rcar_pci_write_reg(pcie->base, PCIE_CONF_BUS(bus->number) |
> >  PCIE_CONF_DEV(dev) | PCIE_CONF_FUNC(func) | reg,
> PCIECAR);
> >
> >  /* Enable the configuration access */
> >  if (bus->parent->number == pcie->root_bus_nr)
> > -rcar_pci_write_reg(pcie, CONFIG_SEND_ENABLE | TYPE0,
> PCIECCTLR);
> > +rcar_pci_write_reg(pcie->base, CONFIG_SEND_ENABLE |
> TYPE0,
> > +   PCIECCTLR);
> >  else
> > -rcar_pci_write_reg(pcie, CONFIG_SEND_ENABLE | TYPE1,
> PCIECCTLR);
> > +rcar_pci_write_reg(pcie->base, CONFIG_SEND_ENABLE |
> TYPE1,
> > +   PCIECCTLR);
> >
> >  /* Check for errors */
> > -if (rcar_pci_read_reg(pcie, PCIEERRFR) & UNSUPPORTED_REQUEST)
> > +if (rcar_pci_read_reg(pcie->base, PCIEERRFR) &
> UNSUPPORTED_REQUEST)
> >  return PCIBIOS_DEVICE_NOT_FOUND;
> >
> >  /* Check for master and target aborts */ @@ -259,12 +139,12 @@
> > static int rcar_pcie_config_access(struct rcar_pcie *pcie,
> >  return PCIBIOS_DEVICE_NOT_FOUND;
> >
> >  if (access_type == RCAR_PCI_ACCESS_READ)
> > -*data = rcar_pci_read_reg(pcie, PCIECDR);
> > +*data = rcar_pci_read_reg(pcie->base, PCIECDR);
> >  else
> > -rcar_pci_write_reg(pcie, *data, PCIECDR);
> > +rcar_pci_write_reg(pcie->base, *data, PCIECDR);
> >
> >  /* Disable the configuration access */
> > -rcar_pci_write_reg(pcie, 0, PCIECCTLR);
> > +rcar_pci_write_reg(pcie->base, 0, PCIECCTLR);
> >
> >  return PCIBIOS_SUCCESSFUL;
> >  }
> > @@ -332,41 +212,6 @@ static struct pci_ops rcar_pcie_ops = {
> >  .write= rcar_pcie_write_conf,
> >  };
> >
> > -static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie,
> > -   struct resource *res)
> > -{
> > -/* Setup PCIe address space mappings for each resource */
> > -resource_size_t size;
> > -resource_size_t res_start;
> > -u32 mask;
> > -
> > -rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win));
> > -
> > -/*
> > - * The PAMR mask is calculated in units of 128Bytes, which
> > - * keeps things pretty simple.
> > - */
> > -size = resource_size(res);
> > -mask = (roundup_pow_of_two(size) / SZ_128) - 1;
> > -rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
> > -
> > -if (res->flags & IORESOURCE_IO)
> > -res_start = pci_pio_to_address(res->start);
> > -else
> > -res_start = res->start;
> > -
> > -rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPAUR(win));
> > -rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F,
> > -   PCIEPALR(win));
> > -
> > -/* First resource is for IO */
> > -mask = PAR_ENABLE;
> > -if (res->flags & IORESOURCE_IO)
> > -mask |= IO_SPACE;
> > -
> > -rcar_pci_write_reg(pcie, mask, PCIEPTCTLR(win));
> > -}
> > -
> >  static int rcar_pcie_setup(struct list_head *resource, struct
> > rcar_pcie *pci)  {
> >  struct resource_entry *win;
> > @@ -382,7 +227,7 @@ static int rcar_pcie_setup(struct list_head
> *resource, struct rcar_pcie *pci)
> >  switch (resource_type(res)) {
> >  case IORESOURCE_IO:
> >  case IORESOURCE_MEM:
> > -rcar_pcie_setup_window(i, pci, res);
> > +rcar_pcie_set_outbound(i, pci->base, res);
> >  i++;
> >  break;
> >  case IORESOURCE_BUS:
> > @@ -404,37 +249,38 @@ static void rcar_pcie_force_speedup(struct
> rcar_pcie *pcie)
> >  unsigned int timeout = 1000;
> >  u32 macsr;
> >
> > -if ((rcar_pci_read_reg(pcie, MACS2R) & LINK_SPEED) !=
> LINK_SPEED_5_0GTS)
> > +if ((rcar_pci_read_reg(pcie->base, MACS2R) & LINK_SPEED) !=
> > +LINK_SPEED_5_0GTS)
> >  return;
> >
> > -if (rcar_pci_read_reg(pcie, MACCTLR) & SPEED_CHANGE) {
> > +if (rcar_pci_read_reg(pcie->base, MACCTLR) & SPEED_CHANGE) {
> >  dev_err(dev, "Speed change already in progress\n");
> >  return;
> >  }
> >
> > -macsr = rcar_pci_read_reg(pcie, MACSR);
> > +macsr = rcar_pci_read_reg(pcie->base, MACSR);
> >  if ((macsr & LINK_SPEED) == LINK_SPEED_5_0GTS)
> >  goto done;
> >
> >  /* Set target link speed to 5.0 GT/s */
> > -rcar_rmw32(pcie, EXPCAP(12), PCI_EXP_LNKSTA_CLS,
> > +rcar_rmw32(pcie->base, EXPCAP(12), PCI_EXP_LNKSTA_CLS,
> >     PCI_EXP_LNKSTA_CLS_5_0GB);
> >
> >  /* Set speed change reason as intentional factor */
> > -rcar_rmw32(pcie, MACCGSPSETR, SPCNGRSN, 0);
> > +rcar_rmw32(pcie->base, MACCGSPSETR, SPCNGRSN, 0);
> >
> >  /* Clear SPCHGFIN, SPCHGSUC, and SPCHGFAIL */
> >  if (macsr & (SPCHGFIN | SPCHGSUC | SPCHGFAIL))
> > -rcar_pci_write_reg(pcie, macsr, MACSR);
> > +rcar_pci_write_reg(pcie->base, macsr, MACSR);
> >
> >  /* Start link speed change */
> > -rcar_rmw32(pcie, MACCTLR, SPEED_CHANGE, SPEED_CHANGE);
> > +rcar_rmw32(pcie->base, MACCTLR, SPEED_CHANGE,
> SPEED_CHANGE);
> >
> >  while (timeout--) {
> > -macsr = rcar_pci_read_reg(pcie, MACSR);
> > +macsr = rcar_pci_read_reg(pcie->base, MACSR);
> >  if (macsr & SPCHGFIN) {
> >  /* Clear the interrupt bits */
> > -rcar_pci_write_reg(pcie, macsr, MACSR);
> > +rcar_pci_write_reg(pcie->base, macsr, MACSR);
> >
> >  if (macsr & SPCHGFAIL)
> >  dev_err(dev, "Speed change failed\n"); @@
> -498,7 +344,7 @@ static
> > int phy_wait_for_ack(struct rcar_pcie *pcie)
> >  unsigned int timeout = 100;
> >
> >  while (timeout--) {
> > -if (rcar_pci_read_reg(pcie, H1_PCIEPHYADRR) & PHY_ACK)
> > +if (rcar_pci_read_reg(pcie->base, H1_PCIEPHYADRR) &
> PHY_ACK)
> >  return 0;
> >
> >  udelay(100);
> > @@ -521,60 +367,31 @@ static void phy_write_reg(struct rcar_pcie *pcie,
> >  ((addr & 0xff) << ADR_POS);
> >
> >  /* Set write data */
> > -rcar_pci_write_reg(pcie, data, H1_PCIEPHYDOUTR);
> > -rcar_pci_write_reg(pcie, phyaddr, H1_PCIEPHYADRR);
> > +rcar_pci_write_reg(pcie->base, data, H1_PCIEPHYDOUTR);
> > +rcar_pci_write_reg(pcie->base, phyaddr, H1_PCIEPHYADRR);
> >
> >  /* Ignore errors as they will be dealt with if the data link is down */
> >  phy_wait_for_ack(pcie);
> >
> >  /* Clear command */
> > -rcar_pci_write_reg(pcie, 0, H1_PCIEPHYDOUTR);
> > -rcar_pci_write_reg(pcie, 0, H1_PCIEPHYADRR);
> > +rcar_pci_write_reg(pcie->base, 0, H1_PCIEPHYDOUTR);
> > +rcar_pci_write_reg(pcie->base, 0, H1_PCIEPHYADRR);
> >
> >  /* Ignore errors as they will be dealt with if the data link is down */
> >  phy_wait_for_ack(pcie);
> >  }
> >
> > -static int rcar_pcie_wait_for_phyrdy(struct rcar_pcie *pcie) -{
> > -unsigned int timeout = 10;
> > -
> > -while (timeout--) {
> > -if (rcar_pci_read_reg(pcie, PCIEPHYSR) & PHYRDY)
> > -return 0;
> > -
> > -msleep(5);
> > -}
> > -
> > -return -ETIMEDOUT;
> > -}
> > -
> > -static int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie) -{
> > -unsigned int timeout = 10000;
> > -
> > -while (timeout--) {
> > -if ((rcar_pci_read_reg(pcie, PCIETSTR) &
> DATA_LINK_ACTIVE))
> > -return 0;
> > -
> > -udelay(5);
> > -cpu_relax();
> > -}
> > -
> > -return -ETIMEDOUT;
> > -}
> > -
> >  static int rcar_pcie_hw_init(struct rcar_pcie *pcie)  {
> >  int err;
> >
> >  /* Begin initialization */
> > -rcar_pci_write_reg(pcie, 0, PCIETCTLR);
> > +rcar_pci_write_reg(pcie->base, 0, PCIETCTLR);
> >
> >  /* Set mode */
> > -rcar_pci_write_reg(pcie, 1, PCIEMSR);
> > +rcar_pci_write_reg(pcie->base, 1, PCIEMSR);
> >
> > -err = rcar_pcie_wait_for_phyrdy(pcie);
> > +err = rcar_pcie_wait_for_phyrdy(pcie->base);
> >  if (err)
> >  return err;
> >
> > @@ -583,51 +400,51 @@ static int rcar_pcie_hw_init(struct rcar_pcie *pcie)
> >   * class to match. Hardware takes care of propagating the IDSETR
> >   * settings, so there is no need to bother with a quirk.
> >   */
> > -rcar_pci_write_reg(pcie, PCI_CLASS_BRIDGE_PCI << 16, IDSETR1);
> > +rcar_pci_write_reg(pcie->base, PCI_CLASS_BRIDGE_PCI << 16,
> IDSETR1);
> >
> >  /*
> >   * Setup Secondary Bus Number & Subordinate Bus Number, even
> though
> >   * they aren't used, to avoid bridge being detected as broken.
> >   */
> > -rcar_rmw32(pcie, RCONF(PCI_SECONDARY_BUS), 0xff, 1);
> > -rcar_rmw32(pcie, RCONF(PCI_SUBORDINATE_BUS), 0xff, 1);
> > +rcar_rmw32(pcie->base, RCONF(PCI_SECONDARY_BUS), 0xff, 1);
> > +rcar_rmw32(pcie->base, RCONF(PCI_SUBORDINATE_BUS), 0xff, 1);
> >
> >  /* Initialize default capabilities. */
> > -rcar_rmw32(pcie, REXPCAP(0), 0xff, PCI_CAP_ID_EXP);
> > -rcar_rmw32(pcie, REXPCAP(PCI_EXP_FLAGS),
> > -PCI_EXP_FLAGS_TYPE, PCI_EXP_TYPE_ROOT_PORT << 4);
> > -rcar_rmw32(pcie, RCONF(PCI_HEADER_TYPE), 0x7f,
> > -PCI_HEADER_TYPE_BRIDGE);
> > +rcar_rmw32(pcie->base, REXPCAP(0), 0xff, PCI_CAP_ID_EXP);
> > +rcar_rmw32(pcie->base, REXPCAP(PCI_EXP_FLAGS),
> > +   PCI_EXP_FLAGS_TYPE, PCI_EXP_TYPE_ROOT_PORT << 4);
> > +rcar_rmw32(pcie->base, RCONF(PCI_HEADER_TYPE), 0x7f,
> > +   PCI_HEADER_TYPE_BRIDGE);
> >
> >  /* Enable data link layer active state reporting */
> > -rcar_rmw32(pcie, REXPCAP(PCI_EXP_LNKCAP),
> PCI_EXP_LNKCAP_DLLLARC,
> > -PCI_EXP_LNKCAP_DLLLARC);
> > +rcar_rmw32(pcie->base, REXPCAP(PCI_EXP_LNKCAP),
> PCI_EXP_LNKCAP_DLLLARC,
> > +   PCI_EXP_LNKCAP_DLLLARC);
> >
> >  /* Write out the physical slot number = 0 */
> > -rcar_rmw32(pcie, REXPCAP(PCI_EXP_SLTCAP),
> PCI_EXP_SLTCAP_PSN, 0);
> > +rcar_rmw32(pcie->base, REXPCAP(PCI_EXP_SLTCAP),
> PCI_EXP_SLTCAP_PSN,
> > +0);
> >
> >  /* Set the completion timer timeout to the maximum 50ms. */
> > -rcar_rmw32(pcie, TLCTLR + 1, 0x3f, 50);
> > +rcar_rmw32(pcie->base, TLCTLR + 1, 0x3f, 50);
> >
> >  /* Terminate list of capabilities (Next Capability Offset=0) */
> > -rcar_rmw32(pcie, RVCCAP(0), 0xfff00000, 0);
> > +rcar_rmw32(pcie->base, RVCCAP(0), 0xfff00000, 0);
> >
> >  /* Enable MSI */
> >  if (IS_ENABLED(CONFIG_PCI_MSI))
> > -rcar_pci_write_reg(pcie, 0x801f0000, PCIEMSITXR);
> > +rcar_pci_write_reg(pcie->base, 0x801f0000, PCIEMSITXR);
> >
> > -rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR);
> > +rcar_pci_write_reg(pcie->base, MACCTLR_INIT_VAL, MACCTLR);
> >
> >  /* Finish initialization - establish a PCI Express link */
> > -rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
> > +rcar_pci_write_reg(pcie->base, CFINIT, PCIETCTLR);
> >
> >  /* This will timeout if we don't have a link. */
> > -err = rcar_pcie_wait_for_dl(pcie);
> > +err = rcar_pcie_wait_for_dl(pcie->base);
> >  if (err)
> >  return err;
> >
> >  /* Enable INTx interrupts */
> > -rcar_rmw32(pcie, PCIEINTXR, 0, 0xF << 8);
> > +rcar_rmw32(pcie->base, PCIEINTXR, 0, 0xF << 8);
> >
> >  wmb();
> >
> > @@ -663,16 +480,16 @@ static int rcar_pcie_phy_init_gen2(struct
> rcar_pcie *pcie)
> >   * These settings come from the R-Car Series, 2nd Generation User's
> >   * Manual, section 50.3.1 (2) Initialization of the physical layer.
> >   */
> > -rcar_pci_write_reg(pcie, 0x000f0030, GEN2_PCIEPHYADDR);
> > -rcar_pci_write_reg(pcie, 0x00381203, GEN2_PCIEPHYDATA);
> > -rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
> > -rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
> > +rcar_pci_write_reg(pcie->base, 0x000f0030, GEN2_PCIEPHYADDR);
> > +rcar_pci_write_reg(pcie->base, 0x00381203, GEN2_PCIEPHYDATA);
> > +rcar_pci_write_reg(pcie->base, 0x00000001, GEN2_PCIEPHYCTRL);
> > +rcar_pci_write_reg(pcie->base, 0x00000006, GEN2_PCIEPHYCTRL);
> >
> > -rcar_pci_write_reg(pcie, 0x000f0054, GEN2_PCIEPHYADDR);
> > +rcar_pci_write_reg(pcie->base, 0x000f0054, GEN2_PCIEPHYADDR);
> >  /* The following value is for DC connection, no termination resistor
> */
> > -rcar_pci_write_reg(pcie, 0x13802007, GEN2_PCIEPHYDATA);
> > -rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
> > -rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
> > +rcar_pci_write_reg(pcie->base, 0x13802007, GEN2_PCIEPHYDATA);
> > +rcar_pci_write_reg(pcie->base, 0x00000001, GEN2_PCIEPHYCTRL);
> > +rcar_pci_write_reg(pcie->base, 0x00000006, GEN2_PCIEPHYCTRL);
> >
> >  return 0;
> >  }
> > @@ -735,7 +552,7 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void
> *data)
> >  struct device *dev = pcie->dev;
> >  unsigned long reg;
> >
> > -reg = rcar_pci_read_reg(pcie, PCIEMSIFR);
> > +reg = rcar_pci_read_reg(pcie->base, PCIEMSIFR);
> >
> >  /* MSI & INTx share an interrupt - we only handle MSI here */
> >  if (!reg)
> > @@ -746,7 +563,7 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void
> *data)
> >  unsigned int msi_irq;
> >
> >  /* clear the interrupt */
> > -rcar_pci_write_reg(pcie, 1 << index, PCIEMSIFR);
> > +rcar_pci_write_reg(pcie->base, 1 << index, PCIEMSIFR);
> >
> >  msi_irq = irq_find_mapping(msi->domain, index);
> >  if (msi_irq) {
> > @@ -760,7 +577,7 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void
> *data)
> >  }
> >
> >  /* see if there's any more pending in this vector */
> > -reg = rcar_pci_read_reg(pcie, PCIEMSIFR);
> > +reg = rcar_pci_read_reg(pcie->base, PCIEMSIFR);
> >  }
> >
> >  return IRQ_HANDLED;
> > @@ -787,8 +604,8 @@ static int rcar_msi_setup_irq(struct
> > msi_controller *chip, struct pci_dev *pdev,
> >
> >  irq_set_msi_desc(irq, desc);
> >
> > -msg.address_lo = rcar_pci_read_reg(pcie, PCIEMSIALR) & ~MSIFE;
> > -msg.address_hi = rcar_pci_read_reg(pcie, PCIEMSIAUR);
> > +msg.address_lo = rcar_pci_read_reg(pcie->base, PCIEMSIALR) &
> ~MSIFE;
> > +msg.address_hi = rcar_pci_read_reg(pcie->base, PCIEMSIAUR);
> >  msg.data = hwirq;
> >
> >  pci_write_msi_msg(irq, &msg);
> > @@ -839,8 +656,8 @@ static int rcar_msi_setup_irqs(struct msi_controller
> *chip,
> >  desc->nvec_used = nvec;
> >  desc->msi_attrib.multiple = order_base_2(nvec);
> >
> > -msg.address_lo = rcar_pci_read_reg(pcie, PCIEMSIALR) & ~MSIFE;
> > -msg.address_hi = rcar_pci_read_reg(pcie, PCIEMSIAUR);
> > +msg.address_lo = rcar_pci_read_reg(pcie->base, PCIEMSIALR) &
> ~MSIFE;
> > +msg.address_hi = rcar_pci_read_reg(pcie->base, PCIEMSIAUR);
> >  msg.data = hwirq;
> >
> >  pci_write_msi_msg(irq, &msg);
> > @@ -940,11 +757,11 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> *pcie)
> >  }
> >  base = virt_to_phys((void *)msi->pages);
> >
> > -rcar_pci_write_reg(pcie, lower_32_bits(base) | MSIFE, PCIEMSIALR);
> > -rcar_pci_write_reg(pcie, upper_32_bits(base), PCIEMSIAUR);
> > +rcar_pci_write_reg(pcie->base, lower_32_bits(base) | MSIFE,
> PCIEMSIALR);
> > +rcar_pci_write_reg(pcie->base, upper_32_bits(base), PCIEMSIAUR);
> >
> >  /* enable all MSI interrupts */
> > -rcar_pci_write_reg(pcie, 0xffffffff, PCIEMSIIER);
> > +rcar_pci_write_reg(pcie->base, 0xffffffff, PCIEMSIIER);
> >
> >  return 0;
> >
> > @@ -958,10 +775,10 @@ static void rcar_pcie_teardown_msi(struct
> rcar_pcie *pcie)
> >  struct rcar_msi *msi = &pcie->msi;
> >
> >  /* Disable all MSI interrupts */
> > -rcar_pci_write_reg(pcie, 0, PCIEMSIIER);
> > +rcar_pci_write_reg(pcie->base, 0, PCIEMSIIER);
> >
> >  /* Disable address decoding of the MSI interrupt, MSIFE */
> > -rcar_pci_write_reg(pcie, 0, PCIEMSIALR);
> > +rcar_pci_write_reg(pcie->base, 0, PCIEMSIALR);
> >
> >  free_pages(msi->pages, 0);
> >
> > @@ -1054,21 +871,8 @@ static int rcar_pcie_inbound_ranges(struct
> rcar_pcie *pcie,
> >  mask = roundup_pow_of_two(size) - 1;
> >  mask &= ~0xf;
> >
> > -/*
> > - * Set up 64-bit inbound regions as the range parser doesn't
> > - * distinguish between 32 and 64-bit types.
> > - */
> > -rcar_pci_write_reg(pcie, lower_32_bits(pci_addr),
> > -   PCIEPRAR(idx));
> > -rcar_pci_write_reg(pcie, lower_32_bits(cpu_addr),
> PCIELAR(idx));
> > -rcar_pci_write_reg(pcie, lower_32_bits(mask) | flags,
> > -   PCIELAMR(idx));
> > -
> > -rcar_pci_write_reg(pcie, upper_32_bits(pci_addr),
> > -   PCIEPRAR(idx + 1));
> > -rcar_pci_write_reg(pcie, upper_32_bits(cpu_addr),
> > -   PCIELAR(idx + 1));
> > -rcar_pci_write_reg(pcie, 0, PCIELAMR(idx + 1));
> > +rcar_pcie_set_inbound(pcie->base, cpu_addr, pci_addr,
> > +      lower_32_bits(mask) | flags, idx, true);
> >
> >  pci_addr += size;
> >  cpu_addr += size;
> > @@ -1170,7 +974,7 @@ static int rcar_pcie_probe(struct platform_device
> *pdev)
> >  goto err_phy_shutdown;
> >  }
> >
> > -data = rcar_pci_read_reg(pcie, MACSR);
> > +data = rcar_pci_read_reg(pcie->base, MACSR);
> >  dev_info(dev, "PCIe x%d: link up\n", (data >> 20) & 0x3f);
> >
> >  if (IS_ENABLED(CONFIG_PCI_MSI)) {
> > @@ -1223,14 +1027,14 @@ static int rcar_pcie_resume_noirq(struct
> > device *dev)  {
> >  struct rcar_pcie *pcie = dev_get_drvdata(dev);
> >
> > -if (rcar_pci_read_reg(pcie, PMSR) &&
> > -    !(rcar_pci_read_reg(pcie, PCIETCTLR) & DL_DOWN))
> > +if (rcar_pci_read_reg(pcie->base, PMSR) &&
> > +    !(rcar_pci_read_reg(pcie->base, PCIETCTLR) & DL_DOWN))
> >  return 0;
> >
> >  /* Re-establish the PCIe link */
> > -rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR);
> > -rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
> > -return rcar_pcie_wait_for_dl(pcie);
> > +rcar_pci_write_reg(pcie->base, MACCTLR_INIT_VAL, MACCTLR);
> > +rcar_pci_write_reg(pcie->base, CFINIT, PCIETCTLR);
> > +return rcar_pcie_wait_for_dl(pcie->base);
> >  }
> >
> >  static const struct dev_pm_ops rcar_pcie_pm_ops = { diff --git
> > a/drivers/pci/controller/pcie-rcar.c
> > b/drivers/pci/controller/pcie-rcar.c
> > new file mode 100644
> > index 0000000..41275f9
> > --- /dev/null
> > +++ b/drivers/pci/controller/pcie-rcar.c
> > @@ -0,0 +1,117 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * PCIe driver for Renesas R-Car SoCs
> > + *  Copyright (C) 2014-2020 Renesas Electronics Europe Ltd
> > + *
> > + * Author: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>  */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/pci.h>
> > +
> > +#include "pcie-rcar.h"
> > +
> > +void rcar_pci_write_reg(void __iomem *base, u32 val, unsigned int
> > +reg) {
> > +writel(val, base + reg);
> > +}
> > +
> > +u32 rcar_pci_read_reg(void __iomem *base, unsigned int reg) {
> > +return readl(base + reg);
> > +}
> > +
> > +void rcar_rmw32(void __iomem *base, int where, u32 mask, u32 data) {
> > +unsigned int shift = BITS_PER_BYTE * (where & 3);
> > +u32 val = rcar_pci_read_reg(base, where & ~3);
> > +
> > +val &= ~(mask << shift);
> > +val |= data << shift;
> > +rcar_pci_write_reg(base, val, where & ~3); }
> > +
> > +int rcar_pcie_wait_for_phyrdy(void __iomem *base) {
> > +unsigned int timeout = 10;
> > +
> > +while (timeout--) {
> > +if (rcar_pci_read_reg(base, PCIEPHYSR) & PHYRDY)
> > +return 0;
> > +
> > +msleep(5);
> > +}
> > +
> > +return -ETIMEDOUT;
> > +}
> > +
> > +int rcar_pcie_wait_for_dl(void __iomem *base) {
> > +unsigned int timeout = 10000;
> > +
> > +while (timeout--) {
> > +if ((rcar_pci_read_reg(base, PCIETSTR) &
> DATA_LINK_ACTIVE))
> > +return 0;
> > +
> > +udelay(5);
> > +cpu_relax();
> > +}
> > +
> > +return -ETIMEDOUT;
> > +}
> > +
> > +void rcar_pcie_set_outbound(int win, void __iomem *base,
> > +    struct resource *res)
> > +{
> > +/* Setup PCIe address space mappings for each resource */
> > +resource_size_t res_start;
> > +resource_size_t size;
> > +u32 mask;
> > +
> > +rcar_pci_write_reg(base, 0x00000000, PCIEPTCTLR(win));
> > +
> > +/*
> > + * The PAMR mask is calculated in units of 128Bytes, which
> > + * keeps things pretty simple.
> > + */
> > +size = resource_size(res);
> > +mask = (roundup_pow_of_two(size) / SZ_128) - 1;
> > +rcar_pci_write_reg(base, mask << 7, PCIEPAMR(win));
> > +
> > +if (res->flags & IORESOURCE_IO)
> > +res_start = pci_pio_to_address(res->start);
> > +else
> > +res_start = res->start;
> > +
> > +rcar_pci_write_reg(base, upper_32_bits(res_start), PCIEPAUR(win));
> > +rcar_pci_write_reg(base, lower_32_bits(res_start) & ~0x7F,
> > +   PCIEPALR(win));
> > +
> > +/* First resource is for IO */
> > +mask = PAR_ENABLE;
> > +if (res->flags & IORESOURCE_IO)
> > +mask |= IO_SPACE;
> > +
> > +rcar_pci_write_reg(base, mask, PCIEPTCTLR(win)); }
> > +
> > +void rcar_pcie_set_inbound(void __iomem *base,
> > +   u64 cpu_addr, u64 pci_addr,
> > +   u64 flags, int idx, bool host)
> > +{
> > +/*
> > + * Set up 64-bit inbound regions as the range parser doesn't
> > + * distinguish between 32 and 64-bit types.
> > + */
> > +if (host)
> > +rcar_pci_write_reg(base, lower_32_bits(pci_addr),
> > +   PCIEPRAR(idx));
> > +rcar_pci_write_reg(base, lower_32_bits(cpu_addr), PCIELAR(idx));
> > +rcar_pci_write_reg(base, flags, PCIELAMR(idx));
> > +
> > +if (host)
> > +rcar_pci_write_reg(base, upper_32_bits(pci_addr),
> > +   PCIEPRAR(idx + 1));
> > +rcar_pci_write_reg(base, upper_32_bits(cpu_addr), PCIELAR(idx +
> 1));
> > +rcar_pci_write_reg(base, 0, PCIELAMR(idx + 1)); }
> > diff --git a/drivers/pci/controller/pcie-rcar.h
> > b/drivers/pci/controller/pcie-rcar.h
> > new file mode 100644
> > index 0000000..b529d806
> > --- /dev/null
> > +++ b/drivers/pci/controller/pcie-rcar.h
> > @@ -0,0 +1,125 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * PCIe driver for Renesas R-Car SoCs
> > + *  Copyright (C) 2014-2020 Renesas Electronics Europe Ltd
> > + *
> > + * Author: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>  */
> > +
> > +#ifndef _PCIE_RCAR_H
> > +#define _PCIE_RCAR_H
> > +
> > +#define PCIECAR0x000010
> > +#define PCIECCTLR0x000018
> > +#define  CONFIG_SEND_ENABLEBIT(31)
> > +#define  TYPE0(0 << 8)
> > +#define  TYPE1BIT(8)
> > +#define PCIECDR0x000020
> > +#define PCIEMSR0x000028
> > +#define PCIEINTXR0x000400
> > +#define PCIEPHYSR0x0007f0
> > +#define  PHYRDYBIT(0)
> > +#define PCIEMSITXR0x000840
> > +
> > +/* Transfer control */
> > +#define PCIETCTLR0x02000
> > +#define  DL_DOWNBIT(3)
> > +#define  CFINITBIT(0)
> > +#define PCIETSTR0x02004
> > +#define  DATA_LINK_ACTIVEBIT(0)
> > +#define PCIEERRFR0x02020
> > +#define  UNSUPPORTED_REQUESTBIT(4)
> > +#define PCIEMSIFR0x02044
> > +#define PCIEMSIALR0x02048
> > +#define  MSIFEBIT(0)
> > +#define PCIEMSIAUR0x0204c
> > +#define PCIEMSIIER0x02050
> > +
> > +/* root port address */
> > +#define PCIEPRAR(x)(0x02080 + ((x) * 0x4))
> > +
> > +/* local address reg & mask */
> > +#define PCIELAR(x)(0x02200 + ((x) * 0x20))
> > +#define PCIELAMR(x)(0x02208 + ((x) * 0x20))
> > +#define  LAM_PREFETCHBIT(3)
> > +#define  LAM_64BITBIT(2)
> > +#define  LAR_ENABLEBIT(1)
> > +
> > +/* PCIe address reg & mask */
> > +#define PCIEPALR(x)(0x03400 + ((x) * 0x20))
> > +#define PCIEPAUR(x)(0x03404 + ((x) * 0x20))
> > +#define PCIEPAMR(x)(0x03408 + ((x) * 0x20))
> > +#define PCIEPTCTLR(x)(0x0340c + ((x) * 0x20))
> > +#define  PAR_ENABLEBIT(31)
> > +#define  IO_SPACEBIT(8)
> > +
> > +/* Configuration */
> > +#define PCICONF(x)(0x010000 + ((x) * 0x4))
> > +#define PMCAP(x)(0x010040 + ((x) * 0x4))
> > +#define EXPCAP(x)(0x010070 + ((x) * 0x4))
> > +#define VCCAP(x)(0x010100 + ((x) * 0x4))
> > +
> > +/* link layer */
> > +#define IDSETR10x011004
> > +#define TLCTLR0x011048
> > +#define MACSR0x011054
> > +#define  SPCHGFINBIT(4)
> > +#define  SPCHGFAILBIT(6)
> > +#define  SPCHGSUCBIT(7)
> > +#define  LINK_SPEED(0xf << 16)
> > +#define  LINK_SPEED_2_5GTS(1 << 16)
> > +#define  LINK_SPEED_5_0GTS(2 << 16)
> > +#define MACCTLR0x011058
> > +#define  MACCTLR_NFTS_MASKGENMASK(23, 16)/* The name
> is from SH7786 */
> > +#define  SPEED_CHANGEBIT(24)
> > +#define  SCRAMBLE_DISABLEBIT(27)
> > +#define  LTSMDISBIT(31)
> > +#define  MACCTLR_INIT_VAL(LTSMDIS | MACCTLR_NFTS_MASK)
> > +#define PMSR0x01105c
> > +#define MACS2R0x011078
> > +#define MACCGSPSETR0x011084
> > +#define  SPCNGRSNBIT(31)
> > +
> > +/* R-Car H1 PHY */
> > +#define H1_PCIEPHYADRR0x04000c
> > +#define  WRITE_CMDBIT(16)
> > +#define  PHY_ACKBIT(24)
> > +#define  RATE_POS12
> > +#define  LANE_POS8
> > +#define  ADR_POS0
> > +#define H1_PCIEPHYDOUTR0x040014
> > +
> > +/* R-Car Gen2 PHY */
> > +#define GEN2_PCIEPHYADDR0x780
> > +#define GEN2_PCIEPHYDATA0x784
> > +#define GEN2_PCIEPHYCTRL0x78c
> > +
> > +#define INT_PCI_MSI_NR32
> > +
> > +#define RCONF(x)(PCICONF(0) + (x))
> > +#define RPMCAP(x)(PMCAP(0) + (x))
> > +#define REXPCAP(x)(EXPCAP(0) + (x))
> > +#define RVCCAP(x)(VCCAP(0) + (x))
> > +
> > +#define PCIE_CONF_BUS(b)(((b) & 0xff) << 24)
> > +#define PCIE_CONF_DEV(d)(((d) & 0x1f) << 19)
> > +#define PCIE_CONF_FUNC(f)(((f) & 0x7) << 16)
> > +
> > +#define RCAR_PCI_MAX_RESOURCES4
> > +#define MAX_NR_INBOUND_MAPS6
> > +
> > +enum {
> > +RCAR_PCI_ACCESS_READ,
> > +RCAR_PCI_ACCESS_WRITE,
> > +};
> > +
> > +void rcar_pci_write_reg(void __iomem *base, u32 val, unsigned int
> > +reg);
> > +u32 rcar_pci_read_reg(void __iomem *base, unsigned int reg); void
> > +rcar_rmw32(void __iomem *base, int where, u32 mask, u32 data); int
> > +rcar_pcie_wait_for_phyrdy(void __iomem *base); int
> > +rcar_pcie_wait_for_dl(void __iomem *base); void
> > +rcar_pcie_set_outbound(int win, void __iomem *base, struct resource
> > +*res); void rcar_pcie_set_inbound(void __iomem *base, u64 cpu_addr,
> u64 pci_addr,
> > +   u64 mask, int idx, bool host);
> > +
> > +#endif
> > --
> > 2.7.4



Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux