The patch regulator: add support for MP8869 regulator has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 97be82880b617fb6bc06ff19e3ddb039501b2dcf Mon Sep 17 00:00:00 2001 From: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx> Date: Mon, 16 Mar 2020 22:30:20 +0800 Subject: [PATCH] regulator: add support for MP8869 regulator The MP8869 from Monolithic Power Systems is a single output DC/DC converter. The voltage can be controlled via I2C. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200316223020.1a6d92ae@xhacker Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/Kconfig | 7 ++ drivers/regulator/Makefile | 1 + drivers/regulator/mp886x.c | 230 +++++++++++++++++++++++++++++++++++++ 3 files changed, 238 insertions(+) create mode 100644 drivers/regulator/mp886x.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 64a39f34ef37..f4b72cb098ef 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -635,6 +635,13 @@ config REGULATOR_MP8859 Say M here if you want to include support for the regulator as a module. The module will be named "mp8859". +config REGULATOR_MP886X + tristate "MPS MP8869 regulator driver" + depends on I2C && (OF || COMPILE_TEST) + select REGMAP_I2C + help + This driver supports the MP8869 voltage regulator. + config REGULATOR_MPQ7920 tristate "Monolithic MPQ7920 PMIC" depends on I2C && OF diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index bc69d6481646..6610ee001d9a 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o obj-$(CONFIG_REGULATOR_MP5416) += mp5416.o obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o +obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c new file mode 100644 index 000000000000..f77321a449ca --- /dev/null +++ b/drivers/regulator/mp886x.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// MP8869 regulator driver +// +// Copyright (C) 2020 Synaptics Incorporated +// +// Author: Jisheng Zhang <jszhang@xxxxxxxxxx> + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +#define MP886X_VSEL 0x00 +#define MP886X_V_BOOT (1 << 7) +#define MP886X_SYSCNTLREG1 0x01 +#define MP886X_MODE (1 << 0) +#define MP886X_GO (1 << 6) +#define MP886X_EN (1 << 7) + +struct mp886x_device_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_init_data *regulator; + struct gpio_desc *en_gpio; + u32 r[2]; + unsigned int sel; +}; + +static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_MODE, MP886X_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int mp886x_get_mode(struct regulator_dev *rdev) +{ + u32 val; + int ret; + + ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val); + if (ret < 0) + return ret; + if (val & MP886X_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) +{ + int ret; + + ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, + MP886X_GO, MP886X_GO); + if (ret < 0) + return ret; + + sel <<= ffs(rdev->desc->vsel_mask) - 1; + return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + MP886X_V_BOOT | rdev->desc->vsel_mask, sel); +} + +static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2) +{ + u32 tmp = uv * r1 / r2; + + return uv + tmp; +} + +static int mp8869_get_voltage_sel(struct regulator_dev *rdev) +{ + struct mp886x_device_info *di = rdev_get_drvdata(rdev); + int ret, uv; + unsigned int val; + bool fbloop; + + ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); + if (ret) + return ret; + + fbloop = val & MP886X_V_BOOT; + if (fbloop) { + uv = rdev->desc->min_uV; + uv = mp8869_scale(uv, di->r[0], di->r[1]); + return regulator_map_voltage_linear(rdev, uv, uv); + } + + val &= rdev->desc->vsel_mask; + val >>= ffs(rdev->desc->vsel_mask) - 1; + + return val; +} + +static const struct regulator_ops mp8869_regulator_ops = { + .set_voltage_sel = mp8869_set_voltage_sel, + .get_voltage_sel = mp8869_get_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = mp886x_set_mode, + .get_mode = mp886x_get_mode, +}; + +static int mp886x_regulator_register(struct mp886x_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + struct regulator_dev *rdev; + + rdesc->name = "mp886x-reg"; + rdesc->supply_name = "vin"; + rdesc->ops = of_device_get_match_data(di->dev); + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = 128; + rdesc->enable_reg = MP886X_SYSCNTLREG1; + rdesc->enable_mask = MP886X_EN; + rdesc->min_uV = 600000; + rdesc->uV_step = 10000; + rdesc->vsel_reg = MP886X_VSEL; + rdesc->vsel_mask = 0x3f; + rdesc->owner = THIS_MODULE; + + rdev = devm_regulator_register(di->dev, &di->desc, config); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + di->sel = rdesc->ops->get_voltage_sel(rdev); + return 0; +} + +static const struct regmap_config mp886x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int mp886x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct mp886x_device_info *di; + struct regulator_config config = { }; + struct regmap *regmap; + int ret; + + di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL); + if (!di) + return -ENOMEM; + + di->regulator = of_get_regulator_init_data(dev, np, &di->desc); + if (!di->regulator) { + dev_err(dev, "Platform data not found!\n"); + return -EINVAL; + } + + ret = of_property_read_u32_array(np, "mps,fb-voltage-divider", + di->r, 2); + if (ret) + return ret; + + di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(di->en_gpio)) + return PTR_ERR(di->en_gpio); + + di->dev = dev; + + regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + i2c_set_clientdata(client, di); + + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = regmap; + config.driver_data = di; + config.of_node = np; + + ret = mp886x_regulator_register(di, &config); + if (ret < 0) + dev_err(dev, "Failed to register regulator!\n"); + return ret; +} + +static const struct of_device_id mp886x_dt_ids[] = { + { + .compatible = "mps,mp8869", + .data = &mp8869_regulator_ops + }, + { } +}; +MODULE_DEVICE_TABLE(of, mp886x_dt_ids); + +static const struct i2c_device_id mp886x_id[] = { + { "mp886x", }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mp886x_id); + +static struct i2c_driver mp886x_regulator_driver = { + .driver = { + .name = "mp886x-regulator", + .of_match_table = of_match_ptr(mp886x_dt_ids), + }, + .probe = mp886x_i2c_probe, + .id_table = mp886x_id, +}; +module_i2c_driver(mp886x_regulator_driver); + +MODULE_AUTHOR("Jisheng Zhang <jszhang@xxxxxxxxxx>"); +MODULE_DESCRIPTION("MP886x regulator driver"); +MODULE_LICENSE("GPL v2"); -- 2.20.1
