Support ADIS16475 and similar IMU devices. These devices are a precision, miniature MEMS inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor combines with signal conditioning that optimizes dynamic performance. The driver adds support for the following devices: * adis16470, adis16475, adis16477, adis16465, adis16467, adis16500, adis16505, adis16507. Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx> --- Changes in v2: * Remove burst mode config (enabled by default); * Fix timestamp channel index; * Do return code checks inline in `adis16475_read_raw`; * Increase buffer size to fit aligned timestamp; * Remove spi_device_id table; * Rename `adis16475_clks` to `adis16475_sync`; * Rename `adis16475_config_ext_clk` `adis16475_config_sync_mode`; * Fix output-sync mode. There's no need to call clk_get in this mode as it acts as an output pin; * Fix scaled-mode configuration. Up scale was not being written on the right register; * Handle burst32 configuration at runtime. When the decimation or the FIR filter is enabled the LSB bits are meangninfull. Hence, use burst32 in that case (if the part supports it); * When there's no burst32 mode and the LSB data is meangninfull, read it manually... * Do not push data to buffers if crc is invalid. MAINTAINERS | 8 + drivers/iio/imu/Kconfig | 13 + drivers/iio/imu/Makefile | 1 + drivers/iio/imu/adis16475.c | 1344 +++++++++++++++++++++++++++++++++++ 4 files changed, 1366 insertions(+) create mode 100644 drivers/iio/imu/adis16475.c diff --git a/MAINTAINERS b/MAINTAINERS index 8fa40c3eb72a..f11262f1f3bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1008,6 +1008,14 @@ W: http://ez.analog.com/community/linux-device-drivers F: drivers/iio/imu/adis16460.c F: Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +ANALOG DEVICES INC ADIS16475 DRIVER +M: Nuno Sa <nuno.sa@xxxxxxxxxx> +L: linux-iio@xxxxxxxxxxxxxxx +W: http://ez.analog.com/community/linux-device-drivers +S: Supported +F: drivers/iio/imu/adis16475.c +F: Documentation/ABI/testing/sysfs-bus-iio-imu-adis16475 + ANALOG DEVICES INC ADM1177 DRIVER M: Beniamin Bia <beniamin.bia@xxxxxxxxxx> M: Michael Hennerich <Michael.Hennerich@xxxxxxxxxx> diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 60bb1029e759..fc4123d518bc 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -29,6 +29,19 @@ config ADIS16460 To compile this driver as a module, choose M here: the module will be called adis16460. +config ADIS16475 + tristate "Analog Devices ADIS16475 and similar IMU driver" + depends on SPI + select IIO_ADIS_LIB + select IIO_ADIS_LIB_BUFFER if IIO_BUFFER + help + Say yes here to build support for Analog Devices ADIS16470, ADIS16475, + ADIS16477, ADIS16465, ADIS16467, ADIS16500, ADIS16505, ADIS16507 inertial + sensors. + + To compile this driver as a module, choose M here: the module will be + called adis16475. + config ADIS16480 tristate "Analog Devices ADIS16480 and similar IMU driver" depends on SPI diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index 5237fd4bc384..88b2c4555230 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -6,6 +6,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADIS16400) += adis16400.o obj-$(CONFIG_ADIS16460) += adis16460.o +obj-$(CONFIG_ADIS16475) += adis16475.o obj-$(CONFIG_ADIS16480) += adis16480.o adis_lib-y += adis.o diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c new file mode 100644 index 000000000000..2ac632cad173 --- /dev/null +++ b/drivers/iio/imu/adis16475.c @@ -0,0 +1,1344 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADIS16475 IMU driver + * + * Copyright 2019 Analog Devices Inc. + */ +#include <asm/unaligned.h> +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/imu/adis.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/spi/spi.h> + +#define ADIS16475_REG_DIAG_STAT 0x02 +#define ADIS16475_REG_X_GYRO_L 0x04 +#define ADIS16475_REG_Y_GYRO_L 0x08 +#define ADIS16475_REG_Z_GYRO_L 0x0C +#define ADIS16475_REG_X_ACCEL_L 0x10 +#define ADIS16475_REG_Y_ACCEL_L 0x14 +#define ADIS16475_REG_Z_ACCEL_L 0x18 +#define ADIS16475_REG_TEMP_OUT 0x1c +#define ADIS16475_REG_X_GYRO_BIAS_L 0x40 +#define ADIS16475_REG_Y_GYRO_BIAS_L 0x44 +#define ADIS16475_REG_Z_GYRO_BIAS_L 0x48 +#define ADIS16475_REG_X_ACCEL_BIAS_L 0x4c +#define ADIS16475_REG_Y_ACCEL_BIAS_L 0x50 +#define ADIS16475_REG_Z_ACCEL_BIAS_L 0x54 +#define ADIS16475_REG_FILT_CTRL 0x5c +#define ADIS16475_FILT_CTRL_MASK GENMASK(2, 0) +#define ADIS16475_FILT_CTRL(x) FIELD_PREP(ADIS16475_FILT_CTRL_MASK, x) +#define ADIS16475_REG_MSG_CTRL 0x60 +#define ADIS16475_MSG_CTRL_DR_POL_MASK BIT(0) +#define ADIS16475_MSG_CTRL_DR_POL(x) \ + FIELD_PREP(ADIS16475_MSG_CTRL_DR_POL_MASK, x) +#define ADIS16475_SYNC_MODE_MASK GENMASK(4, 2) +#define ADIS16475_SYNC_MODE(x) FIELD_PREP(ADIS16475_SYNC_MODE_MASK, x) +#define ADIS16475_REG_UP_SCALE 0x62 +#define ADIS16475_REG_DEC_RATE 0x64 +#define ADIS16475_REG_GLOB_CMD 0x68 +#define ADIS16475_REG_FIRM_REV 0x6c +#define ADIS16475_REG_FIRM_DM 0x6e +#define ADIS16475_REG_FIRM_Y 0x70 +#define ADIS16475_REG_PROD_ID 0x72 +#define ADIS16475_REG_SERIAL_NUM 0x74 +#define ADIS16475_REG_FLASH_CNT 0x7c +#define ADIS16500_BURST32_MASK BIT(9) +#define ADIS16500_BURST32(x) FIELD_PREP(ADIS16500_BURST32_MASK, x) +/* number of data elements in burst mode */ +#define ADIS16475_BURST32_MAX_DATA 32 +#define ADIS16475_BURST_MAX_DATA 20 +#define ADIS16475_MAX_SCAN_DATA 20 +/* spi max speed in brust mode */ +#define ADIS16475_BURST_MAX_SPEED 1000000 +#define ADIS16475_LSB_DEC_MASK BIT(0) +#define ADIS16475_LSB_FIR_MASK BIT(1) + +enum { + ADIS16475_SYNC_DIRECT = 1, + ADIS16475_SYNC_SCALED, + ADIS16475_SYNC_OUTPUT, + ADIS16475_SYNC_PULSE = 5, +}; + +struct adis16475_sync { + u16 sync_mode; + u16 min_rate; + u16 max_rate; +}; + +struct adis16475_chip_info { + const struct iio_chan_spec *channels; + const struct adis16475_sync *sync; + const struct adis_data adis_data; + const char *name; + u32 num_channels; + u32 gyro_max_val; + u32 gyro_max_scale; + u32 accel_max_val; + u32 accel_max_scale; + u32 temp_scale; + u32 int_clk; + u16 max_dec; + u8 num_sync; + bool has_burst32; +}; + +struct adis16475 { + const struct adis16475_chip_info *info; + struct adis adis; + u32 clk_freq; + bool burst32; + unsigned long lsb_flag; +}; + +enum { + ADIS16475_SCAN_GYRO_X, + ADIS16475_SCAN_GYRO_Y, + ADIS16475_SCAN_GYRO_Z, + ADIS16475_SCAN_ACCEL_X, + ADIS16475_SCAN_ACCEL_Y, + ADIS16475_SCAN_ACCEL_Z, + ADIS16475_SCAN_TEMP, + ADIS16475_SCAN_DIAG_S_FLAGS, + ADIS16475_SCAN_CRC_FAILURE, +}; + +#ifdef CONFIG_DEBUG_FS +static ssize_t adis16475_show_firmware_revision(struct file *file, + char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct adis16475 *st = file->private_data; + char buf[7]; + size_t len; + u16 rev; + int ret; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_REV, &rev); + if (ret) + return ret; + + len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff); + + return simple_read_from_buffer(userbuf, count, ppos, buf, len); +} + +static const struct file_operations adis16475_firmware_revision_fops = { + .open = simple_open, + .read = adis16475_show_firmware_revision, + .llseek = default_llseek, + .owner = THIS_MODULE, +}; + +static ssize_t adis16475_show_firmware_date(struct file *file, + char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct adis16475 *st = file->private_data; + u16 md, year; + char buf[12]; + size_t len; + int ret; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_Y, &year); + if (ret) + return ret; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_DM, &md); + if (ret) + return ret; + + len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n", md >> 8, md & 0xff, + year); + + return simple_read_from_buffer(userbuf, count, ppos, buf, len); +} + +static const struct file_operations adis16475_firmware_date_fops = { + .open = simple_open, + .read = adis16475_show_firmware_date, + .llseek = default_llseek, + .owner = THIS_MODULE, +}; + +static int adis16475_show_serial_number(void *arg, u64 *val) +{ + struct adis16475 *st = arg; + u16 serial; + int ret; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_SERIAL_NUM, &serial); + if (ret) + return ret; + + *val = serial; + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(adis16475_serial_number_fops, + adis16475_show_serial_number, NULL, "0x%.4llx\n"); + +static int adis16475_show_product_id(void *arg, u64 *val) +{ + struct adis16475 *st = arg; + u16 prod_id; + int ret; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_PROD_ID, &prod_id); + if (ret) + return ret; + + *val = prod_id; + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(adis16475_product_id_fops, + adis16475_show_product_id, NULL, "%llu\n"); + +static int adis16475_show_flash_count(void *arg, u64 *val) +{ + struct adis16475 *st = arg; + u32 flash_count; + int ret; + + ret = adis_read_reg_32(&st->adis, ADIS16475_REG_FLASH_CNT, + &flash_count); + if (ret) + return ret; + + *val = flash_count; + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(adis16475_flash_count_fops, + adis16475_show_flash_count, NULL, "%lld\n"); + +static int adis16475_debugfs_init(struct iio_dev *indio_dev) +{ + struct adis16475 *st = iio_priv(indio_dev); + + debugfs_create_file("serial_number", 0400, indio_dev->debugfs_dentry, + st, &adis16475_serial_number_fops); + debugfs_create_file("product_id", 0400, indio_dev->debugfs_dentry, st, + &adis16475_product_id_fops); + debugfs_create_file("flash_count", 0400, indio_dev->debugfs_dentry, st, + &adis16475_flash_count_fops); + debugfs_create_file("firmware_revision", 0400, + indio_dev->debugfs_dentry, st, + &adis16475_firmware_revision_fops); + debugfs_create_file("firmware_date", 0400, indio_dev->debugfs_dentry, + st, &adis16475_firmware_date_fops); + return 0; +} +#else +static int adis16475_debugfs_init(struct iio_dev *indio_dev) +{ + return 0; +} +#endif + +static int adis16475_get_freq(struct adis16475 *st, u32 *freq) +{ + int ret; + u16 dec; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, &dec); + if (ret) + return -EINVAL; + + *freq = DIV_ROUND_CLOSEST(st->clk_freq, dec + 1); + + return 0; +} + +static int adis16475_set_freq(struct adis16475 *st, const u32 freq) +{ + u16 dec; + int ret; + + if (freq == 0 || freq > st->clk_freq) + return -EINVAL; + + dec = DIV_ROUND_CLOSEST(st->clk_freq, freq); + + if (dec) + dec--; + + if (dec > st->info->max_dec) + dec = st->info->max_dec; + + ret = adis_write_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, dec); + if (ret) + return ret; + + /* + * If decimation is used, then gyro and accel data will have meaningfull + * bits on the LSB registers. This info is used on the trigger handler. + */ + if (!dec) + clear_bit(ADIS16475_LSB_DEC_MASK, &st->lsb_flag); + else + set_bit(ADIS16475_LSB_DEC_MASK, &st->lsb_flag); + + return 0; +} + +/* The values are approximated. */ +static const u32 adis16475_3db_freqs[] = { + [0] = 720, /* Filter disabled, full BW (~720Hz) */ + [1] = 360, + [2] = 164, + [3] = 80, + [4] = 40, + [5] = 20, + [6] = 10, + [7] = 10, /* not a valid setting */ +}; + +static int adis16475_get_filter(struct adis16475 *st, u32 *filter) +{ + u16 filter_sz; + int ret; + const int mask = ADIS16475_FILT_CTRL_MASK; + + ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL, &filter_sz); + if (ret) + return ret; + + *filter = adis16475_3db_freqs[filter_sz & mask]; + + return 0; +} + +static int adis16475_set_filter(struct adis16475 *st, const u32 filter) +{ + int i; + int ret; + + for (i = ARRAY_SIZE(adis16475_3db_freqs) - 1; i >= 1; i--) { + if (adis16475_3db_freqs[i] >= filter) + break; + } + + ret = adis_write_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL, + ADIS16475_FILT_CTRL(i)); + if (ret) + return ret; + + /* + * If FIR is used, then gyro and accel data will have meaningfull + * bits on the LSB registers. This info is used on the trigger handler. + */ + if (!i) + clear_bit(ADIS16475_LSB_FIR_MASK, &st->lsb_flag); + else + set_bit(ADIS16475_LSB_FIR_MASK, &st->lsb_flag); + + return 0; +} + +static const u32 adis16475_calib_regs[] = { + [ADIS16475_SCAN_GYRO_X] = ADIS16475_REG_X_GYRO_BIAS_L, + [ADIS16475_SCAN_GYRO_Y] = ADIS16475_REG_Y_GYRO_BIAS_L, + [ADIS16475_SCAN_GYRO_Z] = ADIS16475_REG_Z_GYRO_BIAS_L, + [ADIS16475_SCAN_ACCEL_X] = ADIS16475_REG_X_ACCEL_BIAS_L, + [ADIS16475_SCAN_ACCEL_Y] = ADIS16475_REG_Y_ACCEL_BIAS_L, + [ADIS16475_SCAN_ACCEL_Z] = ADIS16475_REG_Z_ACCEL_BIAS_L, +}; + +static int adis16475_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long info) +{ + struct adis16475 *st = iio_priv(indio_dev); + int ret; + u32 tmp; + + switch (info) { + case IIO_CHAN_INFO_RAW: + return adis_single_conversion(indio_dev, chan, 0, val); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *val = st->info->gyro_max_val; + *val2 = st->info->gyro_max_scale; + return IIO_VAL_FRACTIONAL; + case IIO_ACCEL: + *val = st->info->accel_max_val; + *val2 = st->info->accel_max_scale; + return IIO_VAL_FRACTIONAL; + case IIO_TEMP: + *val = st->info->temp_scale; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_CALIBBIAS: + ret = adis_read_reg_32(&st->adis, + adis16475_calib_regs[chan->scan_index], + val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + ret = adis16475_get_filter(st, val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = adis16475_get_freq(st, &tmp); + if (ret) + return ret; + + *val = tmp / 1000; + *val2 = (tmp % 1000) * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int adis16475_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long info) +{ + struct adis16475 *st = iio_priv(indio_dev); + u32 tmp; + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + tmp = val * 1000 + val2 / 1000; + return adis16475_set_freq(st, tmp); + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return adis16475_set_filter(st, val); + case IIO_CHAN_INFO_CALIBBIAS: + return adis_write_reg_32(&st->adis, + adis16475_calib_regs[chan->scan_index], + val); + default: + return -EINVAL; + } +} + +#define ADIS16475_MOD_CHAN(_type, _mod, _address, _si, _r_bits, _s_bits) \ + { \ + .type = (_type), \ + .modified = 1, \ + .channel2 = (_mod), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + .address = (_address), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 's', \ + .realbits = (_r_bits), \ + .storagebits = (_s_bits), \ + .endianness = IIO_BE, \ + }, \ + } + +#define ADIS16475_GYRO_CHANNEL(_mod) \ + ADIS16475_MOD_CHAN(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _GYRO_L, ADIS16475_SCAN_GYRO_ ## _mod, 32, \ + 32) + +#define ADIS16475_ACCEL_CHANNEL(_mod) \ + ADIS16475_MOD_CHAN(IIO_ACCEL, IIO_MOD_ ## _mod, \ + ADIS16475_REG_ ## _mod ## _ACCEL_L, ADIS16475_SCAN_ACCEL_ ## _mod, 32, \ + 32) + +#define ADIS16475_TEMP_CHANNEL() { \ + .type = IIO_TEMP, \ + .indexed = 1, \ + .channel = 0, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ + .address = ADIS16475_REG_TEMP_OUT, \ + .scan_index = ADIS16475_SCAN_TEMP, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec adis16475_channels[] = { + ADIS16475_GYRO_CHANNEL(X), + ADIS16475_GYRO_CHANNEL(Y), + ADIS16475_GYRO_CHANNEL(Z), + ADIS16475_ACCEL_CHANNEL(X), + ADIS16475_ACCEL_CHANNEL(Y), + ADIS16475_ACCEL_CHANNEL(Z), + ADIS16475_TEMP_CHANNEL(), + IIO_CHAN_SOFT_TIMESTAMP(7) +}; + +enum adis16475_variant { + ADIS16470, + ADIS16475_1, + ADIS16475_2, + ADIS16475_3, + ADIS16477_1, + ADIS16477_2, + ADIS16477_3, + ADIS16465_1, + ADIS16465_2, + ADIS16465_3, + ADIS16467_1, + ADIS16467_2, + ADIS16467_3, + ADIS16500, + ADIS16505_1, + ADIS16505_2, + ADIS16505_3, + ADIS16507_1, + ADIS16507_2, + ADIS16507_3, + +}; + +enum { + ADIS16475_DIAG_STAT_DATA_PATH = 1, + ADIS16475_DIAG_STAT_FLASH_MEM, + ADIS16475_DIAG_STAT_SPI, + ADIS16475_DIAG_STAT_STANDBY, + ADIS16475_DIAG_STAT_SENSOR, + ADIS16475_DIAG_STAT_MEMORY, + ADIS16475_DIAG_STAT_CLK, +}; + +static const char * const adis16475_status_error_msgs[] = { + [ADIS16475_DIAG_STAT_DATA_PATH] = "Data Path Overrun", + [ADIS16475_DIAG_STAT_FLASH_MEM] = "Flash memory update failure", + [ADIS16475_DIAG_STAT_SPI] = "SPI communication error", + [ADIS16475_DIAG_STAT_STANDBY] = "Standby mode", + [ADIS16475_DIAG_STAT_SENSOR] = "Sensor failure", + [ADIS16475_DIAG_STAT_MEMORY] = "Memory failure", + [ADIS16475_DIAG_STAT_CLK] = "Clock error", +}; + +static int adis16475_enable_irq(struct adis *adis, bool enable) +{ + /* + * There is no way to gate the data-ready signal internally inside the + * ADIS16475. We can only control it's polarity... + */ + if (enable) + enable_irq(adis->spi->irq); + else + disable_irq(adis->spi->irq); + + return 0; +} + +#define ADIS16475_DATA(_prod_id, _timeouts) \ +{ \ + .msc_ctrl_reg = ADIS16475_REG_MSG_CTRL, \ + .glob_cmd_reg = ADIS16475_REG_GLOB_CMD, \ + .diag_stat_reg = ADIS16475_REG_DIAG_STAT, \ + .prod_id_reg = ADIS16475_REG_PROD_ID, \ + .prod_id = (_prod_id), \ + .self_test_mask = BIT(2), \ + .self_test_reg = ADIS16475_REG_GLOB_CMD, \ + .cs_change_delay = 16, \ + .read_delay = 5, \ + .write_delay = 5, \ + .status_error_msgs = adis16475_status_error_msgs, \ + .status_error_mask = BIT(ADIS16475_DIAG_STAT_DATA_PATH) | \ + BIT(ADIS16475_DIAG_STAT_FLASH_MEM) | \ + BIT(ADIS16475_DIAG_STAT_SPI) | \ + BIT(ADIS16475_DIAG_STAT_STANDBY) | \ + BIT(ADIS16475_DIAG_STAT_SENSOR) | \ + BIT(ADIS16475_DIAG_STAT_MEMORY) | \ + BIT(ADIS16475_DIAG_STAT_CLK), \ + .enable_irq = adis16475_enable_irq, \ + .timeouts = (_timeouts), \ +} + +static const struct adis16475_sync adis16475_sync_mode[] = { + { ADIS16475_SYNC_OUTPUT }, + { ADIS16475_SYNC_DIRECT, 1900, 2100 }, + { ADIS16475_SYNC_SCALED, 1, 128 }, + { ADIS16475_SYNC_PULSE, 1000, 2100 }, +}; + +static const struct adis_timeout adis16475_timeouts = { + .reset_ms = 200, + .sw_reset_ms = 200, + .self_test_ms = 20, +}; + +static const struct adis_timeout adis1650x_timeouts = { + .reset_ms = 260, + .sw_reset_ms = 260, + .self_test_ms = 30, +}; + +static const struct adis16475_chip_info adis16475_chip_info[] = { + [ADIS16470] = { + .name = "adis16470", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16470, &adis16475_timeouts), + }, + [ADIS16475_1] = { + .name = "adis16475-1", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16475, &adis16475_timeouts), + }, + [ADIS16475_2] = { + .name = "adis16475-2", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16475, &adis16475_timeouts), + }, + [ADIS16475_3] = { + .name = "adis16475-3", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16475, &adis16475_timeouts), + }, + [ADIS16477_1] = { + .name = "adis16477-1", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), + }, + [ADIS16477_2] = { + .name = "adis16477-2", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), + }, + [ADIS16477_3] = { + .name = "adis16477-3", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts), + }, + [ADIS16465_1] = { + .name = "adis16465-1", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16465, &adis16475_timeouts), + }, + [ADIS16465_2] = { + .name = "adis16465-2", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16465, &adis16475_timeouts), + }, + [ADIS16465_3] = { + .name = "adis16465-3", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16465, &adis16475_timeouts), + }, + [ADIS16467_1] = { + .name = "adis16467-1", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16467, &adis16475_timeouts), + }, + [ADIS16467_2] = { + .name = "adis16467-2", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16467, &adis16475_timeouts), + }, + [ADIS16467_3] = { + .name = "adis16467-3", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 1, + .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + .num_sync = ARRAY_SIZE(adis16475_sync_mode), + .adis_data = ADIS16475_DATA(16467, &adis16475_timeouts), + }, + [ADIS16500] = { + .name = "adis16500", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 392, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16500, &adis1650x_timeouts), + }, + [ADIS16505_1] = { + .name = "adis16505-1", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), + .accel_max_val = 78, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), + }, + [ADIS16505_2] = { + .name = "adis16505-2", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), + .accel_max_val = 78, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), + }, + [ADIS16505_3] = { + .name = "adis16505-3", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 78, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts), + }, + [ADIS16507_1] = { + .name = "adis16507-1", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), + .accel_max_val = 392, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), + }, + [ADIS16507_2] = { + .name = "adis16507-2", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), + .accel_max_val = 392, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), + }, + [ADIS16507_3] = { + .name = "adis16507-3", + .num_channels = ARRAY_SIZE(adis16475_channels), + .channels = adis16475_channels, + .gyro_max_val = 1, + .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), + .accel_max_val = 392, + .accel_max_scale = 32000 << 16, + .temp_scale = 100, + .int_clk = 2000, + .max_dec = 1999, + .sync = adis16475_sync_mode, + /* pulse sync not supported */ + .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, + .has_burst32 = true, + .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts), + }, +}; + +static const struct iio_info adis16475_info = { + .read_raw = &adis16475_read_raw, + .write_raw = &adis16475_write_raw, + .update_scan_mode = adis_update_scan_mode, + .debugfs_reg_access = adis_debugfs_reg_access, +}; + +static struct adis_burst adis16475_burst = { + .en = true, + .reg_cmd = ADIS16475_REG_GLOB_CMD, + /* + * adis_update_scan_mode_burst() sets the burst length in respect with + * the number of channels and allocates 16 bits for each. However, + * adis1647x devices also need space for DIAG_STAT, DATA_CNTR or + * TIME_STAMP (depending on the clock mode but for us these bytes are + * don't care...) and CRC. + */ + .extra_len = 3 * sizeof(u16), + .burst_max_len = ADIS16475_BURST32_MAX_DATA, +}; + +static u16 adis16475_validate_crc(const u8 *buffer, const u16 crc, + const bool burst32) +{ + int i; + u16 __crc = 0; + /* extra 6 elements for low gyro and accel */ + const u16 sz = burst32 ? ADIS16475_BURST32_MAX_DATA : + ADIS16475_BURST_MAX_DATA; + + for (i = 0; i < sz - 2; i++) + __crc += buffer[i]; + + return (__crc != crc); +} + +static void adis16475_burst32_check(struct adis16475 *st) +{ + int ret; + struct adis *adis = &st->adis; + + if (!st->info->has_burst32) + return; + + if (st->lsb_flag && !st->burst32) { + const u16 en = ADIS16500_BURST32(1); + + ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, + ADIS16500_BURST32_MASK, en); + if (ret < 0) + return; + + st->burst32 = true; + /* + * In 32bit mode we need extra 2 bytes for all gyro + * and accel channels. + */ + adis->burst->extra_len += 6 * sizeof(u16); + adis->xfer[1].len += 6 * sizeof(u16); + dev_dbg(&adis->spi->dev, "Enable burst32 mode, xfer:%d", + adis->xfer[1].len); + + } else if (!st->lsb_flag && st->burst32) { + const u16 en = ADIS16500_BURST32(0); + + ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, + ADIS16500_BURST32_MASK, en); + if (ret < 0) + return; + + st->burst32 = false; + /* Remove the extra bits */ + adis->burst->extra_len -= 6 * sizeof(u16); + adis->xfer[1].len -= 6 * sizeof(u16); + dev_dbg(&adis->spi->dev, "Disable burst32 mode, xfer:%d\n", + adis->xfer[1].len); + } +} + +static irqreturn_t adis16475_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct adis16475 *st = iio_priv(indio_dev); + struct adis *adis = &st->adis; + int ret, bit, i = 0; + u16 crc, data[ADIS16475_MAX_SCAN_DATA], *buffer, crc_res; + /* offset until the first element after gyro and accel */ + const u8 offset = st->burst32 ? 13 : 7; + const u32 cached_spi_speed_hz = adis->spi->max_speed_hz; + + adis->spi->max_speed_hz = ADIS16475_BURST_MAX_SPEED; + + ret = spi_sync(adis->spi, &adis->msg); + if (ret) + return ret; + + adis->spi->max_speed_hz = cached_spi_speed_hz; + buffer = (u16 *)adis->buffer; + + crc = get_unaligned_be16(&buffer[offset + 2]); + crc_res = adis16475_validate_crc((u8 *)adis->buffer, crc, st->burst32); + if (crc_res) { + dev_err(&adis->spi->dev, "Invalid crc\n"); + goto check_burst32; + } + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + /* + * When burst mode is used, system flags is the first data + * channel in the sequence, but the scan index is 7. + */ + switch (bit) { + case ADIS16475_SCAN_TEMP: + data[i++] = get_unaligned(&buffer[offset]); + break; + case ADIS16475_SCAN_GYRO_X ... ADIS16475_SCAN_ACCEL_Z: + /* + * The first 2 bytes on the received data are the + * DIAG_STAT reg, hence the +1 offset here... + */ + if (st->burst32) { + /* upper 16 */ + data[i++] = get_unaligned(&buffer[bit * 2 + 2]); + /* lower 16 */ + data[i++] = get_unaligned(&buffer[bit * 2 + 1]); + } else { + data[i++] = get_unaligned(&buffer[bit + 1]); + /* + * Don't bother in doing the manual read if the + * device supports burst32. burst32 will be + * enabled in the next call to + * adis16475_burst32_check()... + */ + if (st->lsb_flag && !st->info->has_burst32) { + u16 val = 0; + const u32 reg = ADIS16475_REG_X_GYRO_L + + (bit * 4); + __be16 __val; + + adis_read_reg_16(adis, reg, &val); + __val = cpu_to_be16(val); + /* keep sparse happy */ + data[i++] = (__force u16)__val; + } else { + /* lower not used */ + data[i++] = 0; + } + } + break; + } + } + + buffer = data; + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); +check_burst32: + /* + * We only check the burst mode at the end of the current capture since + * it takes a full data ready cycle for the device to update the burst + * array. + */ + adis16475_burst32_check(st); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void adis16475_disable_clk(void *data) +{ + clk_disable_unprepare((struct clk *)data); +} + +static int adis16475_config_sync_mode(struct adis16475 *st) +{ + int ret; + struct device *dev = &st->adis.spi->dev; + const struct adis16475_sync *sync; + u32 sync_mode; + + /* default to internal clk */ + st->clk_freq = st->info->int_clk * 1000; + + ret = device_property_read_u32(dev, "adi,sync-mode", &sync_mode); + if (ret) + return 0; + + if (sync_mode >= st->info->num_sync) { + dev_err(dev, "Invalid sync mode: %u for %s\n", sync_mode, + st->info->name); + return -EINVAL; + } + + sync = &st->info->sync[sync_mode]; + + /* All the other modes require external input signal */ + if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) { + struct clk *clk = devm_clk_get(dev, NULL); + + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, adis16475_disable_clk, clk); + if (ret) + return ret; + + st->clk_freq = clk_get_rate(clk); + if (st->clk_freq < sync->min_rate || + st->clk_freq > sync->max_rate) { + dev_err(dev, + "Clk rate:%u not in a valid range:[%u %u]\n", + st->clk_freq, sync->min_rate, sync->max_rate); + return -EINVAL; + } + + if (sync->sync_mode == ADIS16475_SYNC_SCALED) { + u16 up_scale; + u32 scaled_out_freq = 0; + /* + * If we are in scaled mode, we must have an up_scale. + * In scaled mode the allowable input clock range is + * 1 Hz to 128 Hz, and the allowable output range is + * 1900 to 2100 Hz. Hence, a scale must be given to + * get the allowable output. + */ + device_property_read_u32(dev, "adi,scaled-output-hz", + &scaled_out_freq); + + if (scaled_out_freq < 1900 || scaled_out_freq > 2100) { + dev_err(dev, + "Invalid value:%u for adi,scaled-output-hz", + scaled_out_freq); + return -EINVAL; + } + + up_scale = DIV_ROUND_CLOSEST(scaled_out_freq, + st->clk_freq); + + ret = __adis_write_reg_16(&st->adis, + ADIS16475_REG_UP_SCALE, + up_scale); + if (ret) + return ret; + + st->clk_freq = scaled_out_freq; + } + + st->clk_freq *= 1000; + } + /* + * Keep in mind that the mask for the clk modes in adis1650* + * chips is different (1100 instead of 11100). However, we + * are not configuring BIT(4) in these chips and the default + * value is 0, so we are fine in doing the below operations. + * I'm keeping this for simplicity and avoiding extra variables + * in chip_info. + */ + ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, + ADIS16475_SYNC_MODE_MASK, sync->sync_mode); + if (ret) + return ret; + + usleep_range(250, 260); + + return 0; +} + +static int adis16475_config_irq_pin(struct adis16475 *st) +{ + int ret; + struct irq_data *desc; + u32 irq_type; + u16 val = 0; + u8 polarity; + struct spi_device *spi = st->adis.spi; + + desc = irq_get_irq_data(spi->irq); + if (!desc) { + dev_err(&spi->dev, "Could not find IRQ %d\n", spi->irq); + return -EINVAL; + } + /* + * It is possible to configure the data ready polarity. Furthermore, we + * need to update the adis struct if we want data ready as active low. + */ + irq_type = irqd_get_trigger_type(desc); + if (irq_type == IRQF_TRIGGER_RISING) { + polarity = 1; + } else if (irq_type == IRQF_TRIGGER_FALLING) { + polarity = 0; + st->adis.irq_mask = IRQF_TRIGGER_FALLING; + } else { + dev_err(&spi->dev, "Invalid interrupt type 0x%x specified\n", + irq_type); + return -EINVAL; + } + + val = ADIS16475_MSG_CTRL_DR_POL(polarity); + ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, + ADIS16475_MSG_CTRL_DR_POL_MASK, val); + if (ret) + return ret; + /* + * There is a delay writing to any bits written to the MSC_CTRL + * register. It should not be bigger than 200us, so 250 should be more + * than enough! + */ + usleep_range(250, 260); + + return 0; +} + +static const struct of_device_id adis16475_of_match[] = { + { .compatible = "adi,adis16470", + .data = &adis16475_chip_info[ADIS16470] }, + { .compatible = "adi,adis16475-1", + .data = &adis16475_chip_info[ADIS16475_1] }, + { .compatible = "adi,adis16475-2", + .data = &adis16475_chip_info[ADIS16475_2] }, + { .compatible = "adi,adis16475-3", + .data = &adis16475_chip_info[ADIS16475_3] }, + { .compatible = "adi,adis16477-1", + .data = &adis16475_chip_info[ADIS16477_1] }, + { .compatible = "adi,adis16477-2", + .data = &adis16475_chip_info[ADIS16477_2] }, + { .compatible = "adi,adis16477-3", + .data = &adis16475_chip_info[ADIS16477_3] }, + { .compatible = "adi,adis16465-1", + .data = &adis16475_chip_info[ADIS16465_1] }, + { .compatible = "adi,adis16465-2", + .data = &adis16475_chip_info[ADIS16465_2] }, + { .compatible = "adi,adis16465-3", + .data = &adis16475_chip_info[ADIS16465_3] }, + { .compatible = "adi,adis16467-1", + .data = &adis16475_chip_info[ADIS16467_1] }, + { .compatible = "adi,adis16467-2", + .data = &adis16475_chip_info[ADIS16467_2] }, + { .compatible = "adi,adis16467-3", + .data = &adis16475_chip_info[ADIS16467_3] }, + { .compatible = "adi,adis16500", + .data = &adis16475_chip_info[ADIS16500] }, + { .compatible = "adi,adis16505-1", + .data = &adis16475_chip_info[ADIS16505_1] }, + { .compatible = "adi,adis16505-2", + .data = &adis16475_chip_info[ADIS16505_2] }, + { .compatible = "adi,adis16505-3", + .data = &adis16475_chip_info[ADIS16505_3] }, + { .compatible = "adi,adis16507-1", + .data = &adis16475_chip_info[ADIS16507_1] }, + { .compatible = "adi,adis16507-2", + .data = &adis16475_chip_info[ADIS16507_2] }, + { .compatible = "adi,adis16507-3", + .data = &adis16475_chip_info[ADIS16507_3] }, + { }, +}; +MODULE_DEVICE_TABLE(of, adis16475_of_match); + +static int adis16475_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adis16475 *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + st->adis.burst = &adis16475_burst; + + st->info = of_device_get_match_data(&spi->dev); + if (!st->info) + return -EINVAL; + + ret = adis_init(&st->adis, indio_dev, spi, &st->info->adis_data); + if (ret) + return ret; + + indio_dev->dev.parent = &spi->dev; + indio_dev->name = st->info->name; + indio_dev->channels = st->info->channels; + indio_dev->num_channels = st->info->num_channels; + indio_dev->info = &adis16475_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = __adis_initial_startup(&st->adis); + if (ret) + return ret; + + ret = adis16475_config_irq_pin(st); + if (ret) + return ret; + + ret = adis16475_config_sync_mode(st); + if (ret) + return ret; + + ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, + adis16475_trigger_handler); + if (ret) + return ret; + + adis16475_enable_irq(&st->adis, false); + + ret = devm_iio_device_register(&spi->dev, indio_dev); + if (ret) + return ret; + + adis16475_debugfs_init(indio_dev); + + return 0; +} + +static struct spi_driver adis16475_driver = { + .driver = { + .name = "adis16475", + .of_match_table = adis16475_of_match, + }, + .probe = adis16475_probe, +}; +module_spi_driver(adis16475_driver); + +MODULE_AUTHOR("Nuno Sa <nuno.sa@xxxxxxxxxx>"); +MODULE_DESCRIPTION("Analog Devices ADIS16475 IMU driver"); +MODULE_LICENSE("GPL"); -- 2.25.1
