> -----Original Message-----
> From: Andrew Lunn <andrew@xxxxxxx>
> Sent: Saturday, March 14, 2020 11:16 PM
> To: Madalin Bucur (OSS) <madalin.bucur@xxxxxxxxxxx>
> Cc: davem@xxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; shawnguo@xxxxxxxxxx; Leo Li
> <leoyang.li@xxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH net 1/3] net: fsl/fman: treat all RGMII modes in
> memac_adjust_link()
>
> On Fri, Mar 13, 2020 at 02:04:23PM +0200, Madalin Bucur wrote:
> > Treat all internal delay variants the same as RGMII.
> >
> > Signed-off-by: Madalin Bucur <madalin.bucur@xxxxxxxxxxx>
> > ---
> > drivers/net/ethernet/freescale/fman/fman_memac.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c
> b/drivers/net/ethernet/freescale/fman/fman_memac.c
> > index e1901874c19f..0fc98584974a 100644
> > --- a/drivers/net/ethernet/freescale/fman/fman_memac.c
> > +++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
> > @@ -782,7 +782,10 @@ int memac_adjust_link(struct fman_mac *memac, u16
> speed)
> > /* Set full duplex */
> > tmp &= ~IF_MODE_HD;
> >
> > - if (memac->phy_if == PHY_INTERFACE_MODE_RGMII) {
> > + if (memac->phy_if == PHY_INTERFACE_MODE_RGMII ||
> > + memac->phy_if == PHY_INTERFACE_MODE_RGMII_ID ||
> > + memac->phy_if == PHY_INTERFACE_MODE_RGMII_RXID ||
> > + memac->phy_if == PHY_INTERFACE_MODE_RGMII_TXID) {
>
> Hi Madalin
>
> You can use phy_interface_mode_is_rgmii()
>
> Andrew
I have that on the todo list for all the places in the code, but that's
net-next material.
Thanks,
Madalin
