Re: [RFC PATCH v4 8/8] arm64: tegra: Add Tegra VI CSI support in device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



15.03.2020 04:46, Sowjanya Komatineni пишет:
> Tegra210 contains VI controller for video input capture from MIPI
> CSI camera sensors and also supports built-in test pattern generator.
> 
> CSI ports can be one-to-one mapped to VI channels for capturing from
> an external sensor or from built-in test pattern generator.
> 
> This patch adds support for VI and CSI and enables them in Tegra210
> device tree.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---

Hello Sowjanya,

...
> +
> +			pd_venc: venc {
> +				clocks = <&tegra_car TEGRA210_CLK_VI>,
> +					 <&tegra_car TEGRA210_CLK_CSI>;
> +				resets = <&tegra_car 20>,

What is the clock #20?

> +					 <&tegra_car TEGRA210_CLK_CSI>,
> +					 <&mc TEGRA210_MC_RESET_VI>;

Does this order means that memory controller will be reset *after*
resetting the CSI/VI hardware? This is incorrect reset sequence.

The memory controller reset should be kept asserted during of the time
of the hardware resetting procedure.

The correct sequence should be as follows:

1. Assert MC
2. Reset VI
3. Deassert MC



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux