Hi Icenowy A few comment below. Sam On Thu, Mar 12, 2020 at 12:33:26AM +0800, Icenowy Zheng wrote: > Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. > > Add its device tree binding. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > --- > .../display/panel/xingbangda,xbd599.yaml | 50 +++++++++++++++++++ > 1 file changed, 50 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml > new file mode 100644 > index 000000000000..62816b34de31 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/xingbangda,xbd599.yaml > @@ -0,0 +1,50 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/xingbangda,xbd599.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Xingbangda XBD599 5.99in MIPI-DSI LCD panel > + > +maintainers: > + - Icenowy Zheng <icenowy@xxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: xingbangda,xbd599 > + reg: true > + backlight: true > + reset-gpios: true > + vcc-supply: > + description: regulator that supplies the VCC voltage Fix indent - two chars, not three > + iovcc-supply: > + description: regulator that supplies the IOVCC voltage Same here > + > +required: > + - compatible > + - reg > + - backlight > + - vcc-supply > + - iovcc-supply > + > +additionalProperties: false > + > +examples: > + - | > + &dsi { Remove '&' - dt_binding_check will fail otherwise > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "xingbangda,xbd599"; > + reg = <0>; > + backlight = <&backlight>; > + iovcc-supply = <®_dldo2>; > + vcc-supply = <®_ldo_io0>; > + }; > + }; > + > +... > -- > 2.24.1