Hi Russell,
> Allow the SFP cages to be used with 2W SFP modules.
>
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> index 8a39908e584f..ba25650730c3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> @@ -71,6 +71,7 @@
> tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&cp1_sfpp0_pins>;
> + maximum-power-milliwatt = <2000>;
> };
>
> sfp_eth1: sfp-eth1 {
> @@ -83,6 +84,7 @@
> tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
> + maximum-power-milliwatt = <2000>;
> };
>
> sfp_eth3: sfp-eth3 {
> @@ -95,6 +97,7 @@
> tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
> + maximum-power-milliwatt = <2000>;
> };
> };
>
> --
> 2.20.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
