* Mugunthan V N <mugunthanvnm@xxxxxx> [140513 01:54]: > Tony/Benoit > > On Tuesday 13 May 2014 01:34 PM, Mugunthan V N wrote: > > Adding device tree entry for CPSW to make it work in Dual EMAC mode. > > > > DRA7 cpsw phy sel driver patch has been pulled in net-next git with the > > following commit id *d415fa1b88748d664b7b6a310dd8e699d2686cf7* > > > > Mugunthan V N (3): > > pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC > > arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx > > arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM > > > > arch/arm/boot/dts/dra7-evm.dts | 103 ++++++++++++++++++++++++++++++++++++++ > > arch/arm/boot/dts/dra7.dtsi | 59 ++++++++++++++++++++++ > > include/dt-bindings/pinctrl/dra.h | 8 +++ > > 3 files changed, 170 insertions(+) > > > > This patch series depends on Cross bar dt patch set > http://comments.gmane.org/gmane.linux.drivers.devicetree/73025 That's not enabled yet and sounds like it needs some more work. I suggest you repost this tested without the crossbar. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
