On Fri, Mar 13, 2020 at 10:55:45AM +0100, Andrew Lunn wrote:
> On Fri, Mar 13, 2020 at 06:32:24AM +0100, Oleksij Rempel wrote:
> > The Atheros AR8035 PHY can be autodetected but can't use interrupt
> > support provided on this board. Define MDIO bus and the PHY node to make
> > it work properly.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/imx6q-marsboard.dts | 15 ++++++++++++++-
> > 1 file changed, 14 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
> > index 84b30bd6908f..1f31d86a217b 100644
> > --- a/arch/arm/boot/dts/imx6q-marsboard.dts
> > +++ b/arch/arm/boot/dts/imx6q-marsboard.dts
> > @@ -111,8 +111,21 @@ &fec {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_enet>;
> > phy-mode = "rgmii-id";
> > - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
> > status = "okay";
>
> Hi Oleksij
>
> I don't see a phy-handle here. So is it still using phy_find_first()?
Uff... right. Thx for pointing it.
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
