TJA1102 is an dual T1 PHY chip. Both PHYs are separately addressable.
Both PHYs are similar but have different amount of functionality. For
example PHY 1 has no PHY ID and no health monitor.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
drivers/net/phy/nxp-tja11xx.c | 91 +++++++++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index b705d0bd798b..a064e4ab3616 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -15,6 +15,7 @@
#define PHY_ID_MASK 0xfffffff0
#define PHY_ID_TJA1100 0x0180dc40
#define PHY_ID_TJA1101 0x0180dd00
+#define PHY_ID_TJA1102 0x0180dc80
#define MII_ECTRL 17
#define MII_ECTRL_LINK_CONTROL BIT(15)
@@ -40,6 +41,10 @@
#define MII_INTSRC_TEMP_ERR BIT(1)
#define MII_INTSRC_UV_ERR BIT(3)
+#define MII_INTEN 22
+#define MII_INTEN_LINK_FAIL BIT(10)
+#define MII_INTEN_LINK_UP BIT(9)
+
#define MII_COMMSTAT 23
#define MII_COMMSTAT_LINK_UP BIT(15)
@@ -190,6 +195,7 @@ static int tja11xx_config_init(struct phy_device *phydev)
return ret;
break;
case PHY_ID_TJA1101:
+ case PHY_ID_TJA1102:
ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP);
if (ret)
return ret;
@@ -354,6 +360,55 @@ static int tja11xx_probe(struct phy_device *phydev)
return PTR_ERR_OR_ZERO(priv->hwmon_dev);
}
+static int tja1102_match_phy_device(struct phy_device *phydev, bool port0)
+{
+ int ret;
+
+ if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102)
+ return 0;
+
+ ret = phy_read(phydev, MII_PHYSID2);
+ if (ret < 0)
+ return ret;
+
+ /* TJA1102 Port 1 has phyid 0 and doesn't support temperature
+ * and undervoltage alarms.
+ */
+ if (port0)
+ return ret ? 1 : 0;
+
+ return !ret;
+}
+
+static int tja1102_p0_match_phy_device(struct phy_device *phydev)
+{
+ return tja1102_match_phy_device(phydev, true);
+}
+
+static int tja1102_p1_match_phy_device(struct phy_device *phydev)
+{
+ return tja1102_match_phy_device(phydev, false);
+}
+
+static int tja11xx_ack_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_INTSRC);
+
+ return (ret < 0) ? ret : 0;
+}
+
+static int tja11xx_config_intr(struct phy_device *phydev)
+{
+ int value = 0;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP;
+
+ return phy_write(phydev, MII_INTEN, value);
+}
+
static struct phy_driver tja11xx_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_TJA1100),
@@ -385,6 +440,41 @@ static struct phy_driver tja11xx_driver[] = {
.get_sset_count = tja11xx_get_sset_count,
.get_strings = tja11xx_get_strings,
.get_stats = tja11xx_get_stats,
+ }, {
+ .name = "NXP TJA1102 Port 0",
+ .features = PHY_BASIC_T1_FEATURES,
+ .probe = tja11xx_probe,
+ .soft_reset = tja11xx_soft_reset,
+ .config_init = tja11xx_config_init,
+ .read_status = tja11xx_read_status,
+ .match_phy_device = tja1102_p0_match_phy_device,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .set_loopback = genphy_loopback,
+ /* Statistics */
+ .get_sset_count = tja11xx_get_sset_count,
+ .get_strings = tja11xx_get_strings,
+ .get_stats = tja11xx_get_stats,
+ .ack_interrupt = tja11xx_ack_interrupt,
+ .config_intr = tja11xx_config_intr,
+
+ }, {
+ .name = "NXP TJA1102 Port 1",
+ .features = PHY_BASIC_T1_FEATURES,
+ /* currently no probe for Port 1 is need */
+ .soft_reset = tja11xx_soft_reset,
+ .config_init = tja11xx_config_init,
+ .read_status = tja11xx_read_status,
+ .match_phy_device = tja1102_p1_match_phy_device,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .set_loopback = genphy_loopback,
+ /* Statistics */
+ .get_sset_count = tja11xx_get_sset_count,
+ .get_strings = tja11xx_get_strings,
+ .get_stats = tja11xx_get_stats,
+ .ack_interrupt = tja11xx_ack_interrupt,
+ .config_intr = tja11xx_config_intr,
}
};
@@ -393,6 +483,7 @@ module_phy_driver(tja11xx_driver);
static struct mdio_device_id __maybe_unused tja11xx_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) },
{ PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) },
{ }
};
--
2.25.1
