Hi Prabhakar,
On Thu, Mar 12, 2020 at 10:13 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> This patch switches to assigned-clock-rates for specifying the clock rate.
> The clk-conf.c internally handles setting the clock rate when
> assigned-clock-rates is passed.
>
> The driver now sets the clock frequency only if the deprecated property
> clock-frequency is defined instead assigned-clock-rates, this is to avoid
> breakage with existing DT binaries.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -1055,6 +1055,7 @@ static int ov5645_probe(struct i2c_client *client)
> struct device_node *endpoint;
> struct ov5645 *ov5645;
> u8 chip_id_high, chip_id_low;
> + bool set_clk = false;
> unsigned int i;
> u32 xclk_freq;
> int ret;
> @@ -1094,10 +1095,17 @@ static int ov5645_probe(struct i2c_client *client)
> return PTR_ERR(ov5645->xclk);
> }
>
> - ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
> + ret = of_property_read_u32(dev->of_node, "assigned-clock-rates",
> + &xclk_freq);
> if (ret) {
I think you can just leave out the above check...
> - dev_err(dev, "could not get xclk frequency\n");
> - return ret;
> + /* check if deprecated property clock-frequency is defined */
> + ret = of_property_read_u32(dev->of_node, "clock-frequency",
> + &xclk_freq);
> + if (ret) {
... and ignore the absence of the deprecated property.
> + dev_err(dev, "could not get xclk frequency\n");
> + return ret;
> + }
> + set_clk = true;
I.e. just
/* check if deprecated property clock-frequency is defined */
xclk_freq = 0;
of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
if (xclk_freq) {
ret = clk_set_rate(ov5645->xclk, xclk_freq);
if (ret) {
dev_err(dev, "could not set xclk frequency\n");
return ret;
}
} else {
xclk_freq = clk_get_rate(ov5645->xclk, xclk_freq);
}
> }
>
> /* external clock must be 24MHz, allow 1% tolerance */
> @@ -1107,10 +1115,12 @@ static int ov5645_probe(struct i2c_client *client)
> return -EINVAL;
> }
>
> - ret = clk_set_rate(ov5645->xclk, xclk_freq);
> - if (ret) {
> - dev_err(dev, "could not set xclk frequency\n");
> - return ret;
> + if (set_clk) {
> + ret = clk_set_rate(ov5645->xclk, xclk_freq);
> + if (ret) {
> + dev_err(dev, "could not set xclk frequency\n");
> + return ret;
> + }
> }
>
> for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
