Re: [PATCH v3 2/2] spi: dt-bindings: spi-controller: Fix spi-[rt]x-bus-width for slave mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri,  6 Mar 2020 09:50:38 +0100, Geert Uytterhoeven wrote:
> The descriptions for the spi-rx-bus-width and spi-tx-bus-width
> properties refer to "MISO" and "MOSI", which are not explained in the
> document.  While these abbreviations are fairly common when talking
> about SPI, and thus may not need an explanation, they are not entirely
> correct in this context, as the SPI controller may be used in slave mode
> instead of master mode.
> 
> Fix this by replacing them by "read transfers" resp. "write transfers",
> like is done for the spi-rx-delay-us and spi-tx-delay-us properties.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> v3:
>   - No changes,
> 
> v2:
>   - New.
> 
> This issue was present in the .txt version of the bindings, too, so
> technically it needs
> Fixes: a8830cb19cfea04e ("spi: Document DT bindings for SPI controllers in slave mode")
> but of course it won't apply to that version.
> ---
>  Documentation/devicetree/bindings/spi/spi-controller.yaml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux