On 29/02/2020 04:44, Anson Huang wrote:
> Add thermal binding doc for Freescale's i.MX8MM Thermal Monitoring Unit.
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Applied 1/4 and 2/4.
Thanks
---
> No change.
> ---
> .../devicetree/bindings/thermal/imx8mm-thermal.txt | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
> new file mode 100644
> index 0000000..d09ae82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.txt
> @@ -0,0 +1,15 @@
> +* Thermal Monitoring Unit (TMU) on Freescale i.MX8MM SoC
> +
> +Required properties:
> +- compatible : Must be "fsl,imx8mm-tmu".
> +- reg : Address range of TMU registers.
> +- clocks : TMU's clock source.
> +- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description.
> +
> +Example:
> +tmu: tmu@30260000 {
> + compatible = "fsl,imx8mm-tmu";
> + reg = <0x30260000 0x10000>;
> + clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
> + #thermal-sensor-cells = <0>;
> +};
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
