Re: [PATCHv3 5/5] clk: samsung: exynos542x: Move FSYS subsystem clocks to its sub-CMU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

Thanks for your review comments.

On Wed, 11 Mar 2020 at 20:12, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> On Tue, Mar 10, 2020 at 07:48:54PM +0000, Anand Moon wrote:
> > FSYS power domain support usbdrd3, pdma and usb2 power gaiting,
> > hence move FSYS clk setting to sub-CMU block to support power domain
> > on/off sequences for device nodes.
> >
> > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> > ---
> > New patch in the series
> > ---
> >  drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++-------
> >  1 file changed, 34 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> > index c9e5a1fb6653..6c4c47dfcdce 100644
> > --- a/drivers/clk/samsung/clk-exynos5420.c
> > +++ b/drivers/clk/samsung/clk-exynos5420.c
> > @@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
> >       DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
> >       DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8),
> >
> > -     /* USB3.0 */
> > -     DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4),
> > -     DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
> > -     DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4),
> > -     DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
>
> According to clock diagram these are still in CMU TOP, not FSYS.
>
> > -
> >       /* MMC */
> >       DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10),
> >       DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10),
> > @@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
> />
> >       /* FSYS Block */
> >       GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
> > -     GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
> > -     GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
> >       GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
> >       GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
> >       GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
> > @@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
> >       GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
> >       GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
> >                       GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
> > -     GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
> > -     GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
> > -     GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
> >       GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
> >                       SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
> >
> > @@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = {
> >       { DIV2_RATIO0, 0, 0x30 },       /* DIV dout_gscl_blk_300 */
> >  };
> >
> > +/* USB3.0 */
> > +static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = {
> > +     DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4),
> > +     DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
> > +     DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4),
> > +     DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
> > +};
> > +
> > +static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = {
> > +     GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
> > +     GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
> > +     GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
> > +     GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
> > +     GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
> > +};
> > +
> > +static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = {
> > +     { GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */
>
> This looks wrong. GATE_IP_FSYS has fields also for FSYS2 clocks which
> you are not suspending. They do not belong to this CMU.
>

Ok. I change the from GATE_IP_FSYS to GATE_BUS_FSYS0 in the above
exynos5x_fsys_gate_clks to make this consistent to used GATE_BUS_FSYS0 for CMU,
with this change it works as per previously.

> Don't you need to save also parts of GATE_BUS_FSYS0?

GATE_BUS_FSYS0 and GATE_IP_FSYS are already part of list
of control register which are saved and restored during suspend and resume
so no point in adding this here, I should drop the GATE_IP_FSYS reg
dump over here.

>
> > +     { SRC_TOP3, 0, BIT(24) },                 /* SW_MUX_PCLK_200_FSYS_SEL */
> > +     { SRC_TOP3, 0, BIT(28) },                 /* SW_MUX_ACLK_200_FSYS_SEL */
>
> Name of clocks from the driver please, not from datasheet. Look at other
> examples.
>

Ok  I will update this as per the examples.

> Best regards,
> Krzysztof
>
>

-Anand

> > +};
> > +
> >  static const struct samsung_gate_clock exynos5x_g3d_gate_clks[] __initconst = {
> >       GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9,
> >            CLK_SET_RATE_PARENT, 0),
> > @@ -1376,12 +1387,23 @@ static const struct exynos5_subcmu_info exynos5800_mau_subcmu = {
> >       .pd_name        = "MAU",
> >  };
> >
> > +static const struct exynos5_subcmu_info exynos5x_fsys_subcmu = {
> > +     .div_clks       = exynos5x_fsys_div_clks,
> > +     .nr_div_clks    = ARRAY_SIZE(exynos5x_fsys_div_clks),
> > +     .gate_clks      = exynos5x_fsys_gate_clks,
> > +     .nr_gate_clks   = ARRAY_SIZE(exynos5x_fsys_gate_clks),
> > +     .suspend_regs   = exynos5x_fsys_suspend_regs,
> > +     .nr_suspend_regs = ARRAY_SIZE(exynos5x_fsys_suspend_regs),
> > +     .pd_name        = "FSYS",
> > +};
> > +
> >  static const struct exynos5_subcmu_info *exynos5x_subcmus[] = {
> >       &exynos5x_disp_subcmu,
> >       &exynos5x_gsc_subcmu,
> >       &exynos5x_g3d_subcmu,
> >       &exynos5x_mfc_subcmu,
> >       &exynos5x_mscl_subcmu,
> > +     &exynos5x_fsys_subcmu,
> >  };
> >
> >  static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
> > @@ -1391,6 +1413,7 @@ static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
> >       &exynos5x_mfc_subcmu,
> >       &exynos5x_mscl_subcmu,
> >       &exynos5800_mau_subcmu,
> > +     &exynos5x_fsys_subcmu,
> >  };
> >
> >  static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = {
> > --
> > 2.25.1
> >



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux