Re: [PATCH v2 3/4] drm: bridge: add it66121 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy,

On Wed, Mar 11, 2020 at 03:55:35PM +0200, Andy Shevchenko wrote:
> On Wed, Mar 11, 2020 at 01:51:34PM +0100, Phong LE wrote:
> > This commit is a simple driver for bridge HMDI it66121.
> > The input format is RBG and there is no color conversion.
> > Audio, HDCP and CEC are not supported yet.
> 
> I guess you should have been told in your company how to use get_maintainer.pl
> to avoid spamming people.
> 
> Hint:
> 	scripts/get_maintainer.pl --git --git-min-percent=67 ...

I didn't even know about those options... I don't think we can't expect
contributors to know about this if it's not even documented in
Documentation/process/. And even in that case, if this is what every
contribution should use by default, then those options should become the
default for the get_maintainer.pl script.

> ...
> 
> > + * Copyright (C) 2020 BayLibre, SAS
> > + * Author: Phong LE <ple@xxxxxxxxxxxx>
> > + * Copyright (C) 2018-2019, Artem Mygaiev
> > + * Copyright (C) 2017, Fresco Logic, Incorporated.
> 
> This too compact to read, perhaps squeeze blank line after your (c) note
> followed by description how the rest (c) appear in the file.
> 
> > + *
> 
> Redundant line.
> 
> > + */
> 
> ...
> 
> > +#include <linux/of.h>
> 
> This can be replaced with property.h, see comments against ->probe().
> 
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> 
> I didn't find evidence of use of any of those.
> 
> ...
> 
> > +#define IT66121_MASTER_SEL_REG			0x10
> 
> > +#define IT66121_AFE_DRV_REG			0x61
> 
> > +#define IT66121_INPUT_MODE_REG			0x70
> 
> > +#define IT66121_INPUT_CSC_REG			0x72
> 
> > +#define IT66121_AFE_XP_REG			0x62
> 
> > +#define IT66121_AFE_IP_REG			0x64
> 
> > +#define IT66121_AFE_XP_EC1_REG			0x68
> 
> > +#define IT66121_SW_RST_REG			0x04
> 
> > +#define IT66121_DDC_COMMAND_REG			0x15
> 
> > +#define IT66121_HDCP_REG			0x20
> 
> > +#define IT66121_INT_STATUS1_REG			0x06
> 
> > +#define IT66121_DDC_HEADER_REG			0x11
> 
> > +#define IT66121_DDC_OFFSET_REG			0x12
> > +#define IT66121_DDC_BYTE_REG			0x13
> > +#define IT66121_DDC_SEGMENT_REG			0x14
> > +#define IT66121_DDC_RD_FIFO_REG			0x17
> 
> > +#define IT66121_CLK_BANK_REG			0x0F
> 
> > +#define IT66121_INT_REG				0x05
> 
> > +#define IT66121_INT_MASK1_REG			0x09
> 
> > +#define IT66121_INT_CLR1_REG			0x0C
> 
> > +#define IT66121_AV_MUTE_REG			0xC1
> 
> > +#define IT66121_PKT_GEN_CTRL_REG		0xC6
> 
> > +#define IT66121_AVIINFO_DB1_REG			0x158
> > +#define IT66121_AVIINFO_DB2_REG			0x159
> > +#define IT66121_AVIINFO_DB3_REG			0x15A
> > +#define IT66121_AVIINFO_DB4_REG			0x15B
> > +#define IT66121_AVIINFO_DB5_REG			0x15C
> > +#define IT66121_AVIINFO_CSUM_REG		0x15D
> > +#define IT66121_AVIINFO_DB6_REG			0x15E
> > +#define IT66121_AVIINFO_DB7_REG			0x15F
> > +#define IT66121_AVIINFO_DB8_REG			0x160
> > +#define IT66121_AVIINFO_DB9_REG			0x161
> > +#define IT66121_AVIINFO_DB10_REG		0x162
> > +#define IT66121_AVIINFO_DB11_REG		0x163
> > +#define IT66121_AVIINFO_DB12_REG		0x164
> > +#define IT66121_AVIINFO_DB13_REG		0x165
> > +
> > +#define IT66121_AVI_INFO_PKT_REG		0xCD
> 
> > +#define IT66121_HDMI_MODE_REG			0xC0
> 
> > +#define IT66121_SYS_STATUS_REG			0x0E
> 
> > +#define IT66121_DDC_STATUS_REG			0x16
> 
> It's better to
> a) keep register sorted by value (easy to be oriented);
> b) have them in fixed width, e.g. 0x0CD.
> 
> ...
> 
> > +#define IT66121_DEVICE_MASK			0x0F
> 
> GENMASK() ?
> 
> > +#define IT66121_EDID_SLEEP			20000
> > +#define IT66121_EDID_TIMEOUT			200000
> 
> Care to add units?
> 
> > +#define IT66121_AFE_CLK_HIGH			80000
> 
> Also, what is the unit of this?
> 
> ...
> 
> > +	return regmap_write(ctx->regmap, IT66121_MASTER_SEL_REG,
> > +				IT66121_MASTER_SEL_HOST);
> 
> Indentation?
> Same for other similar places.
> 
> ...
> 
> > +static int it66121_configure_afe(struct it66121_ctx *ctx,
> > +				 const struct drm_display_mode *mode)
> 
> ...like this.
> 
> ...
> 
> > +	if (val & (IT66121_DDC_STATUS_NOACK | IT66121_DDC_STATUS_WAIT_BUS |
> > +	    IT66121_DDC_STATUS_ARBI_LOSE))
> > +		return -EAGAIN;
> 
> Perhaps better to
> 
> 	u32 busy = IT66121_DDC_STATUS_NOACK | IT66121_DDC_STATUS_WAIT_BUS |
> 		   IT66121_DDC_STATUS_ARBI_LOSE;
> 
> 
> 	if (val & busy)
> 		return -EAGAIN;
> 
> ?
> 
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int it66121_abort_ddc_ops(struct it66121_ctx *ctx)
> > +{
> > +	int ret;
> > +	unsigned int swreset, cpdesire;
> > +
> > +	ret = regmap_read(ctx->regmap, IT66121_SW_RST_REG, &swreset);
> > +	if (ret)
> > +		return ret;
> > +
> 
> > +	ret = regmap_read(ctx->regmap, IT66121_HDCP_REG, &cpdesire);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = regmap_write(ctx->regmap, IT66121_HDCP_REG,
> > +			   cpdesire & (~IT66121_HDCP_CPDESIRED & 0xFF));
> > +	if (ret)
> > +		return ret;
> 
> regmap_update_bits() ?
> 
> > +
> > +	ret = regmap_write(ctx->regmap, IT66121_SW_RST_REG,
> > +			   swreset | IT66121_SW_RST_HDCP);
> > +	if (ret)
> > +		return ret;
> 
> This should surround the inner update, correct? Otherwise, regmap_update_bits()
> can be used as well.
> 
> > +}
> 
> ...
> 
> > +static int it66121_get_edid_block(void *context, u8 *buf,
> > +				  unsigned int block, size_t len)
> > +{
> 
> > +		ret = regmap_write(ctx->regmap, IT66121_DDC_COMMAND_REG,
> > +				   IT66121_DDC_COMMAND_EDID_READ);
> > +		if (ret)
> > +			return ret;
> > +
> > +		offset += cnt;
> > +		remain -= cnt;
> 
> > +		msleep(20);
> 
> Should be explained.
> 
> > +
> > +		ret = it66121_wait_ddc_ready(ctx);
> > +		if (ret)
> > +			return ret;
> > +
> 
> > +		do {
> > +			ret = regmap_read(ctx->regmap,
> > +					  IT66121_DDC_RD_FIFO_REG, &val);
> > +			if (ret)
> > +				return ret;
> > +			*(buf++) = val;
> > +			cnt--;
> > +		} while (cnt > 0);
> 
> I'm wondering if regmap API has a helper for above like cases.
> 
> > +	}
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int it66121_connector_get_modes(struct drm_connector *connector)
> > +{
> 
> > +	struct it66121_ctx *ctx = container_of(connector, struct it66121_ctx,
> > +			connector);
> 
> Seems like it can be an inline helper and in all places you can use
> 
> 	struct it66121_ctx *ctx = to_it66121_ctx(connector);
> 
> 
> > +	ret = drm_connector_update_edid_property(connector,
> > +						 ctx->edid);
> 
> It quite fits one line, perhaps configure your editor to see 80 limit sharp?
> Applies to all similar cases as well.
> 
> > +	if (ret) {
> > +		DRM_ERROR("Failed to update EDID property: %d\n", ret);
> > +		goto unlock;
> > +	}
> 
> > +}
> 
> ...
> 
> > +	return (val & IT66121_SYS_STATUS_HPDETECT);
> 
> Too many parentheses.
> 
> ...
> 
> > +	max_clock = ctx->dual_edge ? 74250 : 148500;
> 
> Magic numbers? Also, It seems one definition is enough.
> 
> ...
> 
> > +	msleep(50);
> 
> Should be explained.
> 
> ...
> 
> > +	val = mute ? IT66121_AV_MUTE_ON : (~IT66121_AV_MUTE_ON & 0xFF);
> 
> 	val = mute ? IT66121_AV_MUTE_ON : 0;
> 
> > +	ret = regmap_write_bits(ctx->regmap, IT66121_AV_MUTE_REG,
> > +				IT66121_AV_MUTE_ON, val);
> 
> ...or even
> 
> 	mask = IT66121_AV_MUTE_ON;
> 	val = mute ? mask : 0;
> 
> 	ret = regmap_write_bits(ctx->regmap, IT66121_AV_MUTE_REG, mask, val);
> 
> > +	if (ret)
> > +		return ret;
> 
> ...
> 
> > +	regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
> > +			  IT66121_CLK_BANK_PWROFF_TXCLK,
> > +			  ~IT66121_CLK_BANK_PWROFF_TXCLK & 0xFF);
> 
> Same idea. What the point of all this operations in the value parameter?
> Please, fix over the code.
> 
> ...
> 
> 
> > +	if (val & IT66121_SYS_STATUS_ACTIVE_IRQ) {
> 
> 	if (!(val & IT66121_SYS_STATUS_ACTIVE_IRQ))
> 		goto unlock;
> 
> > +		ret = regmap_read(ctx->regmap, IT66121_INT_STATUS1_REG, &val);
> > +		if (ret) {
> > +			dev_err(dev, "Cannot read STATUS1_REG %d\n", ret);
> > +		} else {
> > +			if (val & IT66121_INT_STATUS1_DDC_FIFOERR)
> > +				it66121_clear_ddc_fifo(ctx);
> 
> > +			if (val & (IT66121_INT_STATUS1_DDC_BUSHANG |
> > +					IT66121_INT_STATUS1_DDC_NOACK))
> 
> Indentation.
> 
> > +				it66121_abort_ddc_ops(ctx);
> > +			if (val & IT66121_INT_STATUS1_HPD_STATUS) {
> > +				regmap_write_bits(ctx->regmap,
> > +						  IT66121_INT_CLR1_REG,
> > +						  IT66121_INT_CLR1_HPD,
> > +						  IT66121_INT_CLR1_HPD);
> > +
> > +				if (!it66121_is_hpd_detect(ctx)) {
> > +					kfree(ctx->edid);
> > +					ctx->edid = NULL;
> > +				}
> > +				event = true;
> > +			}
> > +		}
> > +
> > +		regmap_write_bits(ctx->regmap, IT66121_SYS_STATUS_REG,
> > +				  IT66121_SYS_STATUS_CLEAR_IRQ,
> > +				  IT66121_SYS_STATUS_CLEAR_IRQ);
> > +	}
> > +
> > +unlock:
> > +	mutex_unlock(&ctx->lock);
> 
> ...
> 
> > +static int it66121_probe(struct i2c_client *client,
> > +			 const struct i2c_device_id *id)
> > +{
> 
> > +	u8 ids[4];
> 
> Magic, also see below.
> 
> > +	int i, ret;
> > +	struct it66121_ctx *ctx;
> > +	struct device *dev = &client->dev;
> 
> > +	ctx->conf = (struct it66121_conf *)of_device_get_match_data(dev);
> 
> device_get_match_data()
> 
> In any case why explicit casting?
> 
> > +	if (!ctx->conf)
> > +		return -ENODEV;
> > +
> 
> > +	ctx->dual_edge = of_property_read_bool(dev->of_node, "pclk-dual-edge");
> 
> device_property_read_bool()
> 
> > +	for (i = 0; i < 4; i++) {
> 
> Magic.
> 
> > +		regmap_read(ctx->regmap, i, &ret);
> > +		ids[i] = ret;
> > +	}
> 
> > +
> > +	if (ids[0] != IT66121_VENDOR_ID0 ||
> > +	    ids[1] != IT66121_VENDOR_ID1 ||
> > +	    ids[2] != IT66121_DEVICE_ID0 ||
> > +	    ((ids[3] & IT66121_DEVICE_MASK) != IT66121_DEVICE_ID1)) {
> > +		ite66121_power_off(ctx);
> > +		return -ENODEV;
> > +	}
> > +
> > +	ctx->bridge.funcs = &it66121_bridge_funcs;
> > +	ctx->bridge.of_node = dev->of_node;
> > +
> > +	ret = devm_request_threaded_irq(dev, client->irq, NULL,
> > +					it66121_irq_threaded_handler,
> 
> > +					IRQF_SHARED | IRQF_TRIGGER_LOW |
> > +					IRQF_ONESHOT,
> 
> Shouldn't flags come from appropriate resource provider (DT / ACPI / etc)?
> 
> > +					dev_name(dev),
> > +					ctx);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Failed to request irq %d:%d\n", client->irq, ret);
> > +		ite66121_power_off(ctx);
> > +		return ret;
> > +	}
> > +
> > +	drm_bridge_add(&ctx->bridge);
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static const struct of_device_id it66121_dt_match[] = {
> > +	{ .compatible = "ite,it66121",
> > +	  .data = &it66121_conf_simple,
> > +	},
> 
> > +	{ },
> 
> Terminator line doesn't need comma.
> 
> > +};
> 
> ...
> 
> > +static const struct i2c_device_id it66121_id[] = {
> > +	{ "it66121", 0 },
> 
> > +	{ },
> 
> Ditto.
> 
> > +};

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux