The patch dt-bindings: convert mtk-quadspi binding doc for spi-mtk-nor has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From efe72129f32cac0dee5a221399813b620e310b32 Mon Sep 17 00:00:00 2001 From: Chuanhong Guo <gch981213@xxxxxxxxx> Date: Fri, 6 Mar 2020 16:50:51 +0800 Subject: [PATCH] dt-bindings: convert mtk-quadspi binding doc for spi-mtk-nor spi-mtk-nor is a driver to replace mtk-quadspi and they have almost the same device-tree bindings. Reuse this binding documentation and convert it for new driver: 1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs use different controllers. 2. document "interrupts" as a required property because it's available on all SoCs with this controller and new driver takes advantages of it. It's implemented as optional only to maintain backward compatibility. 3. add a dummy interrupt binding in example. Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx> Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@xxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- .../{mtd/mtk-quadspi.txt => spi/spi-mtk-nor.txt} | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) rename Documentation/devicetree/bindings/{mtd/mtk-quadspi.txt => spi/spi-mtk-nor.txt} (75%) diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt similarity index 75% rename from Documentation/devicetree/bindings/mtd/mtk-quadspi.txt rename to Documentation/devicetree/bindings/spi/spi-mtk-nor.txt index a12e3b5c495d..984ae7fd4f94 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-mtk-nor.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MediaTek SoCs +* Serial NOR flash controller for MediaTek ARM SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -13,6 +13,7 @@ Required properties: "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register +- interrupts: Interrupt number used by the controller. - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks the clocks should be named "spi" and "sf". "spi" is used for spi bus, @@ -22,20 +23,16 @@ Required properties: - #address-cells: should be <1> - #size-cells: should be <0> -The SPI flash must be a child of the nor_flash node and must have a -compatible property. Also see jedec,spi-nor.txt. - -Required properties: -- compatible: May include a device-specific string consisting of the manufacturer - and name of the chip. Must also include "jedec,spi-nor" for any - SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). -- reg : Chip-Select number +There should be only one spi slave device following generic spi bindings. +It's not recommended to use this controller for devices other than SPI NOR +flash due to limited transfer capability of this controller. Example: nor_flash: spi@1100d000 { compatible = "mediatek,mt8173-nor"; reg = <0 0x1100d000 0 0xe0>; + interrupts = <&spi_flash_irq>; clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>; clock-names = "spi", "sf"; -- 2.20.1
