Hi Jacek,
Am Dienstag, den 10.03.2020, 22:15 +0100 schrieb Jacek Anaszewski:
> Hi Denis,
>
> Thank you for the update. Please find my remarks below.
>
> On 3/10/20 4:19 PM, Denis Osterland-Heim wrote:
> > Hi,
> >
...
> > > --- a/drivers/leds/leds-pwm.c
> > > +++ b/drivers/leds/leds-pwm.c
> > > @@ -75,7 +75,8 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
> > > led_data->active_low = led->active_low;
> > > led_data->cdev.name = led->name;
> > > led_data->cdev.default_trigger = led->default_trigger;
> > > - led_data->cdev.brightness = LED_OFF;
> > > + ret = led->default_state == LEDS_GPIO_DEFSTATE_ON;
>
> ret is for return value and it should not be used for anything
> else just because it is at hand. Also LEDS_GPIO* definitions have
> nothing to do with pwm leds. This is legacy because default-state
> property was primarily specific to leds-gpio bindings and only
> later was made common.
>
> Please introduce corresponding LEDS_PWM definitions, but in leds-pwm.c.
will change
>
> > > + led_data->cdev.brightness = ret ? led->max_brightness : LED_OFF;
>
> Instead of above two changes I'd add below:
>
> if (led->default_state == LEDS_PWM_DEFSTATE_ON) {
> led_data->cdev.brightness = led->max_brightness;
> } else if (led->default_state == LEDS_PWM_DEFSTATE_KEEP)) {
> // here put what you're adding below, but please use
> // pwm_get_state() instead of accessing ops directly
> }
>
> LED_OFF case is covered by kzalloc() in led_pwm_probe().
Looks very elegant, I will apply this.
pwm_get_state() is not sufficient here because it only returns the values from structure,
which were not read read from registers at pwm_device_request().
Something like pwm_get_state_uncached() would be required, which I have not found yet.
I looked at the atomic PWM API (5ec803edcb703fe379836f13560b79dfac79b01d),
which claims to provide a smooth handover from bootloader to kernel.
So it seems it would be better to fix the FIXME first, in a first patch.
Regards Denis
>
> > > led_data->cdev.max_brightness = led->max_brightness;
> > > led_data->cdev.flags = LED_CORE_SUSPENDRESUME;
> > >
...
Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________
Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
- Informationen zum Datenschutz, insbesondere zu Ihren Rechten, erhalten Sie unter https://www.diehl.com/group/de/transparenz-und-informationspflichten/
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.
- For general information on data protection and your respective rights please visit https://www.diehl.com/group/en/transparency-and-information-obligations/
