From: Vladimir Oltean <vladimir.oltean@xxxxxxx> LS1028A has a functional connection to the eDMA module. Even if the spi-fsl-dspi.c driver is not using DMA for LS1028A now, define the slots in the DMAMUX for connecting the eDMA channels to the 3 DSPI controllers. Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> --- Changes in v3: None. Changes in v2: None. arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 515e0a1b934f..18155273a46e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -298,6 +298,8 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen 4 1>; + dmas = <&edma0 0 62>, <&edma0 0 60>; + dma-names = "tx", "rx"; spi-num-chipselects = <4>; little-endian; status = "disabled"; @@ -311,6 +313,8 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen 4 1>; + dmas = <&edma0 0 58>, <&edma0 0 56>; + dma-names = "tx", "rx"; spi-num-chipselects = <4>; little-endian; status = "disabled"; @@ -324,6 +328,8 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; clocks = <&clockgen 4 1>; + dmas = <&edma0 0 54>, <&edma0 0 2>; + dma-names = "tx", "rx"; spi-num-chipselects = <3>; little-endian; status = "disabled"; -- 2.17.1
