Hi Phong. On Mon, Mar 09, 2020 at 04:36:53PM +0100, Phong LE wrote: > Add the ITE bridge HDMI it66121 bindings. Good to see that you used DT Schema. > > Signed-off-by: Phong LE <ple@xxxxxxxxxxxx> > --- > .../bindings/display/bridge/ite,it66121.yaml | 95 +++++++++++++++++++ > 1 file changed, 95 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > new file mode 100644 > index 000000000000..f546c0b5a465 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml > @@ -0,0 +1,95 @@ > +# SPDX-License-Identifier: GPL-2.0 For new schemas please use: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ITE it66121 HDMI bridge Device Tree Bindings > + > +maintainers: > + - Phong LE <ple@xxxxxxxxxxxx> > + > +description: | > + The IT66121 is a high-performance and low-power single channel HDMI > + transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible > + to DVI 1.0 specifications. > + > +properties: > + compatible: > + const: ite,it66121 > + > + reg: > + maxItems: 1 > + description: base I2C address of the device > + > + reset-gpios: > + maxItems: 1 > + description: GPIO connected to active low reset > + > + vrf12-supply: > + maxItems: 1 > + description: Regulator for 1.2V analog core power. > + > + vcn33-supply: > + maxItems: 1 > + description: Regulator for 3.3V digital core power. > + > + vcn18-supply: > + maxItems: 1 > + description: Regulator for 1.8V IO core power. > + > + interrupts: > + maxItems: 1 > + > + pclk-dual-edge: > + maxItems: 1 > + description: enable pclk dual edge mode. > + > + port: > + type: object > + > + properties: > + endpoint: > + type: object > + description: | > + Input endpoints of the bridge. > + > + required: > + - endpoint > + Are we missing an additionalProperties: false? So we do not have other properties than the ones listed here. Sam > +required: > + - compatible > + - reg > + - reset-gpios > + - vrf12-supply > + - vcn33-supply > + - vcn18-supply > + - interrupts > + - port > + > +examples: > + - | > + i2c6 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + it66121hdmitx: it66121hdmitx@4c { > + compatible = "ite,it66121"; > + pinctrl-names = "default"; > + pinctrl-0 = <&ite_pins_default>; > + vcn33-supply = <&mt6358_vcn33_wifi_reg>; > + vcn18-supply = <&mt6358_vcn18_reg>; > + vrf12-supply = <&mt6358_vrf12_reg>; > + reset-gpios = <&pio 160 1 /* GPIO_ACTIVE_LOW */>; > + interrupt-parent = <&pio>; > + interrupts = <4 8 /* IRQ_TYPE_LEVEL_LOW */>; > + reg = <0x4c>; > + pclk-dual-edge; > + > + port { > + it66121_in: endpoint { > + remote-endpoint = <&display_out>; > + }; > + }; > + }; > + }; > -- > 2.17.1
