[v2] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



MSM Mobile Display Subsytem(MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema
for the device tree bindings for the same.

Signed-off-by: Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>

Changes in v2:
	- Changed dpu to DPU (Sam Ravnborg)
	- Fixed indentation issues (Sam Ravnborg)
	- Added empty line between different properties (Sam Ravnborg)
	- Replaced reference txt files with  their corresponding
	  yaml files (Sam Ravnborg)
	- Modified the file to use "|" only when it is
	  necessary (Sam Ravnborg)
---
 .../bindings/display/msm/dpu-sc7180.yaml           | 261 +++++++++++++++
 .../bindings/display/msm/dpu-sdm845.yaml           | 259 +++++++++++++++
 .../bindings/display/msm/dsi-sc7180.yaml           | 362 +++++++++++++++++++++
 .../bindings/display/msm/dsi-sdm845.yaml           | 362 +++++++++++++++++++++
 4 files changed, 1244 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
new file mode 100644
index 0000000..2a9efc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DPU dt properties.
+
+maintainers:
+  - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SC7180 target.
+
+properties:
+  "mdss":
+    type: object
+    description: |
+      Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP
+      interfaces.
+
+    properties:
+     compatible:
+       items:
+         - const: qcom,sc7180-mdss
+
+     reg:
+       description: Physical base address and length of controller's registers.
+
+     reg-names:
+       description: |
+         Names for different register regions defined above. The required region
+         is mentioned below.
+       items:
+         - const: mdss
+
+     power-domains:
+       description: |
+         A power domain consumer specifier according to
+         Documentation/devicetree/bindings/power/power-domain.yaml.
+
+     clocks:
+       description: List of clock specifiers for clocks needed by the device.
+
+     clock-names:
+       description: |
+         Device clock names in the same order as mentioned in clocks property.
+         The required clocks are mentioned below.
+       items:
+         - const: iface
+         - const: bus
+         - const: ahb
+         - const: core
+
+     interrupts:
+       description: Interrupt signal from MDSS.
+
+     interrupt-controller:
+       description: Identifies the node as an interrupt controller.
+
+     "#interrupt-cells":
+       description: |
+         Specifies the number of cells needed to encode an interrupt source.
+       const: 1
+
+     iommus:
+       description: Phandle of iommu device node.
+
+     "#address-cells":
+       description: |
+         Indicate how many cells (32 bits values) are needed to form the base
+         address part in the reg property.
+
+     "#size-cells":
+       description: |
+         Indicate how many cells (32 bits values) are needed to specify the
+         size part in the reg property.
+
+     ranges:
+       description: |
+         Parent bus address space is the same as the child bus address space.
+
+     interconnects :
+       description: |
+         Interconnect path specifier for MDSS according to
+         Documentation/devicetree/bindings/interconnect/interconnect.txt.
+         Should be 2 paths corresponding to 2 AXI ports.
+
+     interconnect-names:
+       description: |
+         MDSS will have 2 port names to differentiate between the
+         2 interconnect paths defined with interconnect specifier.
+
+     properties:
+       description: |
+         The optional properties for MDSS are mentioned below.
+         assigned-clocks:
+           description: |
+             List of clock specifiers for clocks needing rate assignment.
+
+         assigned-clock-rates:
+           description: |
+             List of clock frequencies sorted in the same order as the
+             assigned-clocks property.
+
+     "mdp":
+       type: object
+       description: Node containing the properties of DPU.
+
+       properties:
+         compatible:
+           items:
+             - const: qcom,sc7180-dpu
+
+         reg:
+           description: |
+             Physical base address and length of controller's registers.
+
+         reg-names:
+           description: |
+             Register region names. The following regions are required.
+           items:
+             - const: mdp
+             - const: vbif
+
+         clocks:
+           description: |
+             List of clock specifiers for clocks needed by the device.
+
+         clock-names:
+           description: |
+             Device clock names, must be in same order as clocks property.
+             The following clocks are required. "bus" is an optional property
+             in sc7180 due to architecture change.
+           items:
+             - const: iface
+             - const: core
+             - const: vsync
+
+         interrupts:
+           description: Interrupt line from DPU to MDSS.
+
+         ports:
+           type: object
+           description: |
+             Contains the list of output ports from DPU device. These ports
+             connect to interfaces that are external to the DPU hardware,
+             such as DSI, DP etc. Each output port contains an endpoint that
+             describes how it is connected to an external interface. These
+             are described by the standard properties documented in files
+             mentioned below.
+
+             Documentation/devicetree/bindings/graph.txt
+             Documentation/devicetree/bindings/media/video-interfaces.txt
+
+           properties:
+             port0:
+               type: object
+               description: DPU_INTF1 (DSI1)
+             port1:
+               type: object
+               description: DPU_INTF2 (DSI2)
+
+         properties:
+           description: |
+             The optional properties for DPU are mentioned below.
+             assigned-clocks:
+               description: |
+                 List of clock specifiers for clocks needing rate assignment.
+
+             assigned-clock-rates:
+               description: |
+                 List of clock frequencies sorted in the same order as the
+                 assigned-clocks property.
+
+             clock-names:
+               description: |
+                 Optional device clocks, needed for accessing LUT blocks.
+               items:
+                 - const: rot
+                 - const: lut
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    mdss: mdss@ae00000 {
+         compatible = "qcom,sc7180-mdss";
+         reg = <0xae00000 0x1000>;
+         reg-names = "mdss";
+         power-domains = <&clock_dispcc 0>;
+         clocks = <&gcc GCC_DISP_AHB_CLK>,
+                  <&gcc GCC_DISP_HF_AXI_CLK>,
+                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
+         clock-names = "iface", "gcc_bus", "core";
+         assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+         assigned-clock-rates = <300000000>;
+
+         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+         interrupt-controller;
+         #interrupt-cells = <1>;
+
+         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+
+         interconnect-names = "mdp0-mem";
+
+         iommus = <&apps_smmu 0x800 0x2>;
+
+         #address-cells = <2>;
+         #size-cells = <2>;
+
+         mdss_mdp: mdp@ae01000 {
+                   compatible = "qcom,sc7180-dpu";
+                   reg = <0 0x0ae01000 0 0x8f000>,
+                         <0 0x0aeb0000 0 0x2008>,
+                         <0 0x0af03000 0 0x16>;
+                   reg-names = "mdp", "vbif", "disp_cc";
+
+                   clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                            <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                   clock-names = "iface", "rot", "lut", "core",
+                                                "vsync";
+                   assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                   assigned-clock-rates = <300000000>, <19200000>;
+                   interrupt-parent = <&mdss>;
+                   interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+                   ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                                  remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+                   };
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
new file mode 100644
index 0000000..bb975938
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DPU dt properties.
+
+maintainers:
+  - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for SDM845 target.
+
+properties:
+  "mdss":
+    type: object
+    description: |
+      Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP
+      interfaces.
+
+    properties:
+     compatible:
+       items:
+         - const: qcom,sdm845-mdss
+
+     reg:
+       description: Physical base address and length of controller's registers.
+
+     reg-names:
+       description: |
+         Names for different register regions defined above. The required region
+         is mentioned below.
+       items:
+         - const: mdss
+
+     power-domains:
+       description: |
+         A power domain consumer specifier according to
+         Documentation/devicetree/bindings/power/power-domain.yaml.
+
+     clocks:
+       description: List of clock specifiers for clocks needed by the device.
+
+     clock-names:
+       description: |
+         Device clock names in the same order as mentioned in clocks property.
+         The required clocks are mentioned below.
+       items:
+         - const: iface
+         - const: bus
+         - const: core
+
+     interrupts:
+       description: Interrupt signal from MDSS.
+
+     interrupt-controller:
+       description: Identifies the node as an interrupt controller.
+
+     "#interrupt-cells":
+       description: |
+         Specifies the number of cells needed to encode an interrupt source.
+       const: 1
+
+     iommus:
+       description: Phandle of iommu device node.
+
+     "#address-cells":
+       description: |
+         Indicate how many cells (32 bits values) are needed to form the base
+         address part in the reg property.
+
+     "#size-cells":
+       description: |
+         Indicate how many cells (32 bits values) are needed to specify the
+         size part in the reg property.
+
+     ranges:
+       description: |
+         Parent bus address space is the same as the child bus address space.
+
+     interconnects :
+       description: |
+         Interconnect path specifier for MDSS according to
+         Documentation/devicetree/bindings/interconnect/interconnect.txt.
+         Should be 2 paths corresponding to 2 AXI ports.
+
+     interconnect-names:
+       description: |
+         MDSS will have 2 port names to differentiate between the
+         2 interconnect paths defined with interconnect specifier.
+
+     properties:
+       description: |
+         The optional properties for MDSS are mentioned below.
+         assigned-clocks:
+           description: |
+             List of clock specifiers for clocks needing rate assignment.
+
+         assigned-clock-rates:
+           description: |
+             List of clock frequencies sorted in the same order as the
+             assigned-clocks property.
+
+     "mdp":
+       type: object
+       description: Node containing the properties of DPU.
+
+       properties:
+         compatible:
+           items:
+             - const: qcom,sc7180-dpu
+
+         reg:
+           description: |
+             Physical base address and length of controller's registers.
+
+         reg-names:
+           description: |
+             Register region names. The following regions are required.
+           items:
+             - const: mdp
+             - const: vbif
+
+         clocks:
+           description: |
+             List of clock specifiers for clocks needed by the device.
+
+         clock-names:
+           description: |
+             Device clock names, must be in same order as clocks property.
+             The following clocks are required.
+           items:
+             - const: bus
+             - const: iface
+             - const: core
+             - const: vsync
+
+         interrupts:
+           description: Interrupt line from DPU to MDSS.
+
+         ports:
+           type: object
+           description: |
+             Contains the list of output ports from DPU device. These ports
+             connect to interfaces that are external to the DPU hardware,
+             such as DSI, DP etc. Each output port contains an endpoint that
+             describes how it is connected to an external interface. These
+             are described by the standard properties documented in files
+             mentioned below.
+
+             Documentation/devicetree/bindings/graph.txt
+             Documentation/devicetree/bindings/media/video-interfaces.txt
+
+           properties:
+             port0:
+               type: object
+               description: DPU_INTF1 (DSI1)
+             port1:
+               type: object
+               description: DPU_INTF2 (DSI2)
+
+         properties:
+           description: |
+             The optional properties for DPU are mentioned below.
+             assigned-clocks:
+               description: |
+                 List of clock specifiers for clocks needing rate assignment.
+
+             assigned-clock-rates:
+               description: |
+                 List of clock frequencies sorted in the same order as the
+                 assigned-clocks property.
+
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ports
+
+examples:
+- |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mdss: mdss@ae00000 {
+          compatible = "qcom,sdm845-mdss";
+          reg = <0 0x0ae00000 0 0x1000>;
+          reg-names = "mdss";
+          power-domains = <&dispcc MDSS_GDSC>;
+
+          clocks = <&gcc GCC_DISP_AHB_CLK>,
+                   <&gcc GCC_DISP_AXI_CLK>,
+                   <&dispcc DISP_CC_MDSS_MDP_CLK>;
+          clock-names = "iface", "bus", "core";
+
+          assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+          assigned-clock-rates = <300000000>;
+
+          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-controller;
+          #interrupt-cells = <1>;
+
+          iommus = <&apps_smmu 0x880 0x8>,
+                   <&apps_smmu 0xc80 0x8>;
+
+          #address-cells = <2>;
+          #size-cells = <2>;
+
+          mdss_mdp: mdp@ae01000 {
+                    compatible = "qcom,sdm845-dpu";
+                    reg = <0 0x0ae01000 0 0x8f000>,
+                          <0 0x0aeb0000 0 0x2008>;
+                    reg-names = "mdp", "vbif";
+
+                    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                             <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                             <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                             <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                    clock-names = "iface", "bus", "core", "vsync";
+
+                    assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                                      <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                    assigned-clock-rates = <300000000>,
+                                           <19200000>;
+
+                    interrupt-parent = <&mdss>;
+                    interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+                    ports {
+                           #address-cells = <1>;
+                           #size-cells = <0>;
+
+                           port@0 {
+                                   reg = <0>;
+                                   dpu_intf1_out: endpoint {
+                                                  remote-endpoint = <&dsi0_in>;
+                                   };
+                           };
+
+                           port@1 {
+                                   reg = <1>;
+                                   dpu_intf2_out: endpoint {
+                                                  remote-endpoint = <&dsi1_in>;
+                                   };
+                           };
+                    };
+          };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
new file mode 100644
index 0000000..4727205
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
@@ -0,0 +1,362 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DSI interface dt properties.
+
+maintainers:
+  - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
+
+description: |
+  Device tree bindings for DSI controller and DSI PHY for SC7180 target.
+
+properties:
+  "dsi-controller":
+    type: object
+    description: Node containing the properties of DSI controller.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,mdss-dsi-ctrl
+
+      reg:
+        description: Physical base address and length of registers of controller.
+
+      reg-names:
+        description: |
+          Names for different register regions defined above. The required region
+          is mentioned below.
+        items:
+          - const: dsi_ctrl
+
+      clocks:
+        description: Phandles to device clocks.
+
+      clock-names:
+        description: |
+          Device clock names in the same order as mentioned in clocks property.
+          The required clocks are mentioned below. For DSIv2, we need an
+          additional clock "src" and for DSI6G v2.0 onwards we need
+          "byte_intf" clock.
+        items:
+          - const: iface
+          - const: bus
+          - const: byte
+          - const: pixel
+          - const: core
+
+      assigned-clocks:
+        description: Parents of "byte" and "pixel" for the given platform.
+
+      assigned-clock-parents:
+        description: |
+          The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
+          Details on clock bindings are mentioned in
+          Documentation/devicetree/bindings/clock/clock-bindings.txt.
+
+      vdd-supply:
+        description: Phandle to vdd regulator device node.
+
+      vddio-supply:
+        description: Phandle to vdd-io regulator device node.
+
+      vdda-supply:
+        description: Phandle to vdda regulator device node.
+
+      phys:
+        description: Phandle to DSI PHY device node.
+
+      phy-names:
+        description: Name of the corresponding PHY device.
+
+      syscon-sfpb:
+        description: A phandle to mmss_sfpb syscon node (only for DSIv2).
+
+      ports:
+        description: |
+          Contains 2 DSI controller ports as child nodes. Each port contains
+          an endpoint subnode as defined in
+          Documentation/devicetree/bindings/graph.txt and
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+      properties:
+        description: |
+          The optional properties for DSI controller are mentioned below.
+
+          panel@0:
+            description: |
+              Node of panel connected to this DSI controller.
+              See files in Documentation/devicetree/bindings/display/panel/
+              for each supported panel.
+
+          qcom,dual-dsi-mode:
+            description: |
+              Boolean value indicating if the DSI controller is
+              driving a panel which needs 2 DSI links.
+
+          qcom,master-dsi:
+            description: |
+              Boolean value indicating if the DSI controller is driving
+              the master link of the 2-DSI panel.
+
+          qcom,sync-dual-dsi:
+            description: |
+              Boolean value indicating if the DSI controller is driving a
+              2-DSI panel whose 2 links need receive command simultaneously.
+
+          pinctrl-names:
+            description: The pin control state names; should contain "default"
+
+          pinctrl-0:
+            description: The default pinctrl state (active)
+
+          pinctrl-n:
+            description: The "sleep" pinctrl state
+
+          ports:
+            description: |
+              Contains DSI controller input and output ports as children, each
+              containing one endpoint subnode.
+
+          properties:
+            description: DSI Endpoint properties
+
+            remote-endpoint:
+              description: |
+                For port@0, set to phandle of the connected panel/bridge's
+                input endpoint. For port@1, set to the MDP interface output.
+                See Documentation/devicetree/bindings/graph.txt for
+                device graph info.
+
+            data-lanes:
+              description: |
+                This describes how the physical DSI data lanes are mapped
+                to the logical lanes on the given platform. The value contained in
+                index n describes what physical lane is mapped to the logical lane n
+                (DATAn, where n lies between 0 and 3). The clock lane position is fixed
+                and can't be changed. Hence, they aren't a part of the DT bindings. See
+                Documentation/devicetree/bindings/media/video-interfaces.txt for
+                more info on the data-lanes property.
+
+                For example:
+
+                data-lanes = <3 0 1 2>;
+
+                The above mapping describes that the logical data lane DATA0 is mapped
+                to the physical data lane DATA3, logical DATA1 to physical DATA0,
+                logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. There are
+                only a limited number of physical to logical mappings possible.
+              oneOf:
+                - const: <0 1 2 3>
+                - const: <1 2 3 0>
+                - const: <2 3 0 1>
+                - const: <3 0 1 2>
+                - const: <0 3 2 1>
+                - const: <1 0 3 2>
+                - const: <2 1 0 3>
+                - const: <3 2 1 0>
+
+          qcom,mdss-mdp-transfer-time-us:
+            description: |
+              Specifies the DSI transfer time for command mode
+              panels in microseconds. Driver uses this number to adjust
+              the clock rate according to the expected transfer time.
+              Increasing this value would slow down the mdp processing
+              and can result in slower performance.
+              Decreasing this value can speed up the mdp processing,
+              but this can also impact power consumption.
+              As a rule this time should not be higher than the time
+              that would be expected with the processing at the
+              DSI link rate since anyways this would be the maximum
+              transfer time that could be achieved.
+              If ping pong split is enabled, this time should not be higher
+              than two times the DSI link rate time.
+              If the property is not specified, then the default value is
+              14000 us. This is an optional property.
+
+  "dsi_phy":
+    type: object
+    description: Node containing the properties of DSI PHY
+
+    properties:
+      compatible:
+        oneOf:
+          - const: qcom,dsi-phy-28nm-hpm
+          - const: qcom,dsi-phy-28nm-lp
+          - const: qcom,dsi-phy-20nm
+          - const: qcom,dsi-phy-28nm-8960
+          - const: qcom,dsi-phy-14nm
+          - const: qcom,dsi-phy-10nm
+          - const: qcom,dsi-phy-10nm-8998
+
+      reg:
+        description: |
+          Physical base address and length of the registers of PLL, PHY. Some
+          revisions require the PHY regulator base address, whereas others
+          require the PHY lane base address. See below for each PHY revision.
+
+      reg-names:
+        description: Name of register regions.
+        oneOf:
+          - description: |
+              Following regions are required for DSI 28nm HPM/LP/8960 PHYs and
+              20nm PHY.
+            items:
+              - const: dsi_pll
+              - const: dsi_phy
+              - const: dsi_phy_regulator
+
+          - description: |
+              Following regions are required for DSI 14nm and 10nm PHYs:
+            items:
+              - const: dsi_pll
+              - const: dsi_phy
+              - const: dsi_phy_lane
+
+      clock-cells:
+        description: |
+          The DSI PHY block acts as a clock provider, creating
+          2 clocks: A byte clock (index 0), and a pixel clock (index 1).
+        const: 1
+
+      power-domains:
+        description: Should be <&mmcc MDSS_GDSC>.
+
+      clocks:
+        description: |
+          Phandles to device clocks. See
+          Documentation/devicetree/bindings/clock/clock-bindings.txt
+          for details on clock bindings.
+
+      clock-names:
+        description: |
+          The following clocks are required.
+          "iface"
+          "ref" (only required for new DTS files/entries)
+
+      vddio-supply:
+        description: |
+          Phandle to vdd-io regulator device node. Required for 28nm HPM/LP,
+          28nm 8960 PHYs and 20nm PHY.
+
+      vcca-supply:
+        description: |
+          Phandle to vcca regulator device node. Required for 20nm PHY and
+          10nm PHY.
+
+      vdds-supply:
+        description: |
+          Phandle to vdds regulator device node. Required for 10nm PHY.
+
+      properties:
+        description: |
+          The optional properties for DSI PHY are mentioned below.
+
+          qcom,dsi-phy-regulator-ldo-mode:
+            description: |
+              Boolean value indicating if the LDO mode PHY regulator is wanted.
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+
+     dsi0: dsi@fd922800 {
+           compatible = "qcom,mdss-dsi-ctrl";
+           qcom,dsi-host-index = <0>;
+           interrupt-parent = <&mdp>;
+           interrupts = <4 0>;
+           reg-names = "dsi_ctrl";
+           reg = <0xfd922800 0x200>;
+           power-domains = <&mmcc MDSS_GDSC>;
+
+           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&gcc GCC_DISP_HF_AXI_CLK>;
+           clock-names = "byte",
+                         "byte_intf",
+                         "pixel",
+                         "core",
+                         "iface",
+                         "bus";
+           assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                             <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+           assigned-clock-parents = <&dsi_phy0 0>,
+                                    <&dsi_phy0 1>;
+
+           vdda-supply = <&pma8084_l2>;
+           vdd-supply = <&pma8084_l22>;
+           vddio-supply = <&pma8084_l12>;
+
+           phys = <&dsi_phy0>;
+           phy-names ="dsi-phy";
+
+           qcom,dual-dsi-mode;
+           qcom,master-dsi;
+           qcom,sync-dual-dsi;
+
+           qcom,mdss-mdp-transfer-time-us = <12000>;
+
+           pinctrl-names = "default", "sleep";
+           pinctrl-0 = <&dsi_active>;
+           pinctrl-1 = <&dsi_suspend>;
+
+           ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                      reg = <0>;
+                      dsi0_in: endpoint {
+                               remote-endpoint = <&mdp_intf1_out>;
+                      };
+               };
+
+               port@1 {
+                      reg = <1>;
+                      dsi0_out: endpoint {
+                                remote-endpoint = <&panel_in>;
+                                data-lanes = <0 1 2 3>;
+                      };
+               };
+           };
+
+           panel: panel@0 {
+                  compatible = "sharp,lq101r1sx01";
+                  link2 = <&secondary>;
+
+                  port {
+                       panel_in: endpoint {
+                                 remote-endpoint = <&dsi0_out>;
+                       };
+                  };
+           };
+     };
+
+     dsi_phy0: dsi-phy@fd922a00 {
+               compatible = "qcom,dsi-phy-28nm-hpm";
+               qcom,dsi-phy-index = <0>;
+               reg-names =
+                        "dsi_pll",
+                        "dsi_phy",
+                        "dsi_phy_regulator";
+               reg =   <0xfd922a00 0xd4>,
+                       <0xfd922b00 0x2b0>,
+                       <0xfd922d80 0x7b>;
+               clock-names = "iface";
+               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
+               #clock-cells = <1>;
+               #phy-cells = <0>;
+               vddio-supply = <&pma8084_l12>;
+
+               qcom,dsi-phy-regulator-ldo-mode;
+     };
+...
+
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml
new file mode 100644
index 0000000..e494a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml
@@ -0,0 +1,362 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DSI interface dt properties.
+
+maintainers:
+  - Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx>
+
+description: |
+  Device tree bindings for DSI controller and DSI PHY for SDM845 target.
+
+properties:
+  "dsi-controller":
+    type: object
+    description: Node containing the properties of DSI controller.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,mdss-dsi-ctrl
+
+      reg:
+        description: Physical base address and length of registers of controller.
+
+      reg-names:
+        description: |
+          Names for different register regions defined above. The required region
+          is mentioned below.
+        items:
+          - const: dsi_ctrl
+
+      clocks:
+        description: Phandles to device clocks.
+
+      clock-names:
+        description: |
+          Device clock names in the same order as mentioned in clocks property.
+          The required clocks are mentioned below. For DSIv2, we need an
+          additional clock "src" and for DSI6G v2.0 onwards we need
+          "byte_intf" clock.
+        items:
+          - const: iface
+          - const: bus
+          - const: byte
+          - const: pixel
+          - const: core
+
+      assigned-clocks:
+        description: Parents of "byte" and "pixel" for the given platform.
+
+      assigned-clock-parents:
+        description: |
+          The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
+          Details on clock bindings are mentioned in
+          Documentation/devicetree/bindings/clock/clock-bindings.txt.
+
+      vdd-supply:
+        description: Phandle to vdd regulator device node.
+
+      vddio-supply:
+        description: Phandle to vdd-io regulator device node.
+
+      vdda-supply:
+        description: Phandle to vdda regulator device node.
+
+      phys:
+        description: Phandle to DSI PHY device node.
+
+      phy-names:
+        description: Name of the corresponding PHY device.
+
+      syscon-sfpb:
+        description: A phandle to mmss_sfpb syscon node (only for DSIv2).
+
+      ports:
+        description: |
+          Contains 2 DSI controller ports as child nodes. Each port contains
+          an endpoint subnode as defined in
+          Documentation/devicetree/bindings/graph.txt and
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+      properties:
+        description: |
+          The optional properties for DSI controller are mentioned below.
+
+          panel@0:
+            description: |
+              Node of panel connected to this DSI controller.
+              See files in Documentation/devicetree/bindings/display/panel/
+              for each supported panel.
+
+          qcom,dual-dsi-mode:
+            description: |
+              Boolean value indicating if the DSI controller is
+              driving a panel which needs 2 DSI links.
+
+          qcom,master-dsi:
+            description: |
+              Boolean value indicating if the DSI controller is driving
+              the master link of the 2-DSI panel.
+
+          qcom,sync-dual-dsi:
+            description: |
+              Boolean value indicating if the DSI controller is driving a
+              2-DSI panel whose 2 links need receive command simultaneously.
+
+          pinctrl-names:
+            description: The pin control state names; should contain "default"
+
+          pinctrl-0:
+            description: The default pinctrl state (active)
+
+          pinctrl-n:
+            description: The "sleep" pinctrl state
+
+          ports:
+            description: |
+              Contains DSI controller input and output ports as children, each
+              containing one endpoint subnode.
+
+          properties:
+            description: DSI Endpoint properties
+
+            remote-endpoint:
+              description: |
+                For port@0, set to phandle of the connected panel/bridge's
+                input endpoint. For port@1, set to the MDP interface output.
+                See Documentation/devicetree/bindings/graph.txt for
+                device graph info.
+
+            data-lanes:
+              description: |
+                This describes how the physical DSI data lanes are mapped
+                to the logical lanes on the given platform. The value contained in
+                index n describes what physical lane is mapped to the logical lane n
+                (DATAn, where n lies between 0 and 3). The clock lane position is fixed
+                and can't be changed. Hence, they aren't a part of the DT bindings. See
+                Documentation/devicetree/bindings/media/video-interfaces.txt for
+                more info on the data-lanes property.
+
+                For example:
+
+                data-lanes = <3 0 1 2>;
+
+                The above mapping describes that the logical data lane DATA0 is mapped
+                to the physical data lane DATA3, logical DATA1 to physical DATA0,
+                logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. There are
+                only a limited number of physical to logical mappings possible.
+              oneOf:
+                - const: <0 1 2 3>
+                - const: <1 2 3 0>
+                - const: <2 3 0 1>
+                - const: <3 0 1 2>
+                - const: <0 3 2 1>
+                - const: <1 0 3 2>
+                - const: <2 1 0 3>
+                - const: <3 2 1 0>
+
+          qcom,mdss-mdp-transfer-time-us:
+            description: |
+              Specifies the DSI transfer time for command mode
+              panels in microseconds. Driver uses this number to adjust
+              the clock rate according to the expected transfer time.
+              Increasing this value would slow down the mdp processing
+              and can result in slower performance.
+              Decreasing this value can speed up the mdp processing,
+              but this can also impact power consumption.
+              As a rule this time should not be higher than the time
+              that would be expected with the processing at the
+              DSI link rate since anyways this would be the maximum
+              transfer time that could be achieved.
+              If ping pong split is enabled, this time should not be higher
+              than two times the DSI link rate time.
+              If the property is not specified, then the default value is
+              14000 us. This is an optional property.
+
+  "dsi_phy":
+    type: object
+    description: Node containing the properties of DSI PHY
+
+    properties:
+      compatible:
+        oneOf:
+          - const: qcom,dsi-phy-28nm-hpm
+          - const: qcom,dsi-phy-28nm-lp
+          - const: qcom,dsi-phy-20nm
+          - const: qcom,dsi-phy-28nm-8960
+          - const: qcom,dsi-phy-14nm
+          - const: qcom,dsi-phy-10nm
+          - const: qcom,dsi-phy-10nm-8998
+
+      reg:
+        description: |
+          Physical base address and length of the registers of PLL, PHY. Some
+          revisions require the PHY regulator base address, whereas others
+          require the PHY lane base address. See below for each PHY revision.
+
+      reg-names:
+        description: Name of register regions.
+        oneOf:
+          - description: |
+              Following regions are required for DSI 28nm HPM/LP/8960 PHYs and
+              20nm PHY.
+            items:
+              - const: dsi_pll
+              - const: dsi_phy
+              - const: dsi_phy_regulator
+
+          - description: |
+              Following regions are required for DSI 14nm and 10nm PHYs:
+            items:
+              - const: dsi_pll
+              - const: dsi_phy
+              - const: dsi_phy_lane
+
+      clock-cells:
+        description: |
+          The DSI PHY block acts as a clock provider, creating
+          2 clocks: A byte clock (index 0), and a pixel clock (index 1).
+        const: 1
+
+      power-domains:
+        description: Should be <&mmcc MDSS_GDSC>.
+
+      clocks:
+        description: |
+          Phandles to device clocks. See
+          Documentation/devicetree/bindings/clock/clock-bindings.txt
+          for details on clock bindings.
+
+      clock-names:
+        description: |
+          The following clocks are required.
+          "iface"
+          "ref" (only required for new DTS files/entries)
+
+      vddio-supply:
+        description: |
+          Phandle to vdd-io regulator device node. Required for 28nm HPM/LP,
+          28nm 8960 PHYs and 20nm PHY.
+
+      vcca-supply:
+        description: |
+          Phandle to vcca regulator device node. Required for 20nm PHY and
+          10nm PHY.
+
+      vdds-supply:
+        description: |
+          Phandle to vdds regulator device node. Required for 10nm PHY.
+
+      properties:
+        description: |
+          The optional properties for DSI PHY are mentioned below.
+
+          qcom,dsi-phy-regulator-ldo-mode:
+            description: |
+              Boolean value indicating if the LDO mode PHY regulator is wanted.
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+     dsi0: dsi@fd922800 {
+           compatible = "qcom,mdss-dsi-ctrl";
+           qcom,dsi-host-index = <0>;
+           interrupt-parent = <&mdp>;
+           interrupts = <4 0>;
+           reg-names = "dsi_ctrl";
+           reg = <0xfd922800 0x200>;
+           power-domains = <&mmcc MDSS_GDSC>;
+
+           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
+           clock-names = "byte",
+                         "byte_intf",
+                         "pixel",
+                         "core",
+                         "iface",
+                         "bus";
+           assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                             <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+           assigned-clock-parents = <&dsi_phy0 0>,
+                                    <&dsi_phy0 1>;
+
+           vdda-supply = <&pma8084_l2>;
+           vdd-supply = <&pma8084_l22>;
+           vddio-supply = <&pma8084_l12>;
+
+           phys = <&dsi_phy0>;
+           phy-names ="dsi-phy";
+
+           qcom,dual-dsi-mode;
+           qcom,master-dsi;
+           qcom,sync-dual-dsi;
+
+           qcom,mdss-mdp-transfer-time-us = <12000>;
+
+           pinctrl-names = "default", "sleep";
+           pinctrl-0 = <&dsi_active>;
+           pinctrl-1 = <&dsi_suspend>;
+
+           ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                      reg = <0>;
+                      dsi0_in: endpoint {
+                               remote-endpoint = <&mdp_intf1_out>;
+                      };
+               };
+
+               port@1 {
+                      reg = <1>;
+                      dsi0_out: endpoint {
+                                remote-endpoint = <&panel_in>;
+                                data-lanes = <0 1 2 3>;
+                      };
+               };
+           };
+
+           panel: panel@0 {
+                  compatible = "sharp,lq101r1sx01";
+                  link2 = <&secondary>;
+
+                  port {
+                       panel_in: endpoint {
+                                 remote-endpoint = <&dsi0_out>;
+                       };
+                  };
+           };
+     };
+
+     dsi_phy0: dsi-phy@fd922a00 {
+               compatible = "qcom,dsi-phy-28nm-hpm";
+               qcom,dsi-phy-index = <0>;
+               reg-names =
+                        "dsi_pll",
+                        "dsi_phy",
+                        "dsi_phy_regulator";
+               reg =   <0xfd922a00 0xd4>,
+                       <0xfd922b00 0x2b0>,
+                       <0xfd922d80 0x7b>;
+               clock-names = "iface";
+               clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
+               #clock-cells = <1>;
+               #phy-cells = <0>;
+               vddio-supply = <&pma8084_l12>;
+
+               qcom,dsi-phy-regulator-ldo-mode;
+     };
+...
+
-- 
1.9.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux